Order by 4pm for next working day delivery*

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.

Show prices Inc. VAT

Kronospan Finesse · K030 SU· Super Matt

Java Block Wood Laminate Worktop

A block of weathered planks in charcoal and mid grey, with visible saw marks and grain, in the Kronospan Super Matt finish. This 38mm postformed laminate kitchen worktop suits modern industrial rooms, and a matching upstand and splashback are made to go with it.

Thickness and edge
Size

What's an upstand?

Upstand, 100mm highWorktop 100mm high 22mm thick Silicone bead 600mm deep worktop Wall

What it is

A 100mm-high strip in Java Block Wood, the same decor as your worktop. It sits along the back edge of the worktop, against the wall.

Why you need one

Walls are rarely straight, so there's nearly always a gap between worktop and wall. An upstand covers it, stops water and crumbs getting down the back, and gives a neat finished line. It's the simplest, cheapest way to finish a worktop.

Sizes

    Most kitchens need one length per wall run.

    Fitting

    Cut it to length with a fine-tooth saw and bond it to the wall with grab adhesive. Run a bead of clear or matching silicone along the bottom edge, and finish any exposed ends with an end cap.

    Upstand or splashback?

    Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

    Read the full fitting guide

    What's a splashback?

    Splashbackupstand heightHob and oven 640mm high 10mm thick Worktop Wall

    What it is

    A full-height panel in Java Block Wood, the same decor as your worktop, fixed to the wall behind the hob or sink.

    Why choose one

    One continuous wipe-clean surface with no grout lines, so there's nothing to stain or scrub between tiles. It protects the wall from splashes and cooking grease, and makes the worktop and wall look like one piece.

    Sizes

      It's double-sided: Linen Block Wood is on the reverse, so you can choose which way round to fit it.

      Behind a hob

      Check the minimum clearance to a laminate panel in your hob's installation manual. Gas hobs usually need more space, or a heat-resistant panel behind the burners.

      Fitting

      Cut it to size and bond it to a flat, sound wall with panel adhesive. Seal the bottom edge to the worktop with silicone.

      Upstand or splashback?

      Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

      Read the full fitting guide

      What's an edging strip?

      BeforeCut end: barechipboard core AfterEdging strip,45mm wide, coversa cut end

      What it is

      A strip in Java Block Wood that covers the cut end of the worktop. It comes pre-glued, or is fixed with contact adhesive.

      When you need it

      Whenever a cut end is on show: at the end of a run, on a breakfast bar, or anywhere you've cut a length down.

      Sizes

        Fitting

        1. Glue Spread contact adhesive on the end and the strip, or warm a pre-glued strip.
        2. Press Press it on firmly from the middle outwards, with a block of wood.
        3. Trim and file Trim the overhang with a sharp blade, then file the edges down at a slight angle.
        Read the full fitting guide

        What are joining strips?

        Corner strip (L-shape)Straight stripSeen from above Aluminium strip38mm worktop: use the38mm stripWorktopWorktop

        What it is

        An aluminium strip that joins two worktop lengths without a router or jig. The web slips between the two ends and the cap covers the joint.

        Straight or corner

        Straight: joins two lengths in a line. Corner: makes an L-shaped join where two runs meet.

        Sizes

          Match the strip to your worktop's thickness: a 38mm strip for a 38mm worktop.

          The alternative

          A mason's mitre gives a seamless corner, but it needs a worktop jig and a router. See both options in our fitting guide.

          Read the full fitting guide

          What are end caps?

          BeforeAfterExposed endEnd capScrewed over therounded profile Left end capRight end capYou, facing the worktopWall

          What it is

          An aluminium cap that finishes the exposed end of a postformed worktop, following its rounded front edge.

          Left or right?

          Stand facing the worktop. If the exposed end is on your left, you need a left end cap; if it's on your right, a right end cap.

          Sizes

            Match the cap to your worktop's thickness.

            Fitting

            Hold the cap against the end, drill small pilot holes and screw it on. A thin bead of silicone behind it keeps water out of the end.

            Read the full fitting guide

            What's in the joint kit?

            3 connector boltsJoint sealant Seen from underneathBolts pull the joint tight;sealant keeps water out

            What's in it

            Three connector bolts and a tube of joint sealant: everything to hold one worktop joint together.

            What it's for

            The bolts sit in pockets cut underneath both worktops and pull the joint tight. The sealant goes on the joint faces first, so water can't get into the core.

            How many?

            One kit per worktop joint.

              Read the full fitting guide
              Total inc VAT £118.27

              Free delivery on this order

              4 interest-free payments of £29.56
              or 3 interest-free payments of £39.42

              18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

              Order by 4pm for next working day delivery*

              • Weathered grey planks, 38mm and postformed
              • Super Matt on decor K030
              • Pale Linen Block Wood on the splashback back
              • Boards 3m and 4.1m; bars to 900mm
              • Free deliveryNext working day to most of the UK*
              • Full lengthsDelivered uncut, ready to fit
              • Pay your wayCard, Clearpay or Klarna
              Description

              A block of weathered planks in charcoal and mid grey, with visible saw marks and grain, in the Kronospan Super Matt finish. This 38mm postformed laminate kitchen worktop suits modern industrial rooms, and a matching upstand and splashback are made to go with it.

              Delivery

              Delivered by our specialist worktop delivery partner, in full lengths, flat and protected. Delivery is free to every postcode we serve. Order by 4pm Monday to Friday for next working day delivery to most of England and Wales; orders placed after 4pm, at weekends or on bank holidays are dispatched the next working day, and some areas take 2 to 3 working days. Check your date below. We confirm your slot 24 hours before, and delivery is kerbside, so have a second person ready to carry it in.

              Returns

              Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

              Care and cleaning

              Wipe along the planks with warm soapy water and dry the surface. A soft cloth is enough, as the finish has no polish to protect. Trivets and boards save the surface from heat and knives.

              Which edge?

              • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
              • Square edge: a sharp, modern line with a matching edge strip.
              • Compact: 12mm solid board, slim and waterproof.
              More on edges and thickness

              Fitting in four steps

              • Measure, then cut face down with a fine-tooth blade.
              • Lay it on the units and screw up through the brackets.
              • Seal the cut edges, then fit the upstand and end caps.
              Read the full fitting guide

              How to measure

              • Measure each wall run along the back, in millimetres.
              • Add about 50mm to every run so you can trim to a clean fit.
              • In an L-shape, let the longest run go into the corner.
              Full measuring guide

              Size guide

              • Worktops come 3000mm or 4100mm long and 600mm deep.
              • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
              • Buy a length that covers your run, then cut it to fit.
              Full sizes and heights guide

              Why you’ll love it

              • Charcoal and grey reclaimed planks

                The swatch shows narrow planks in dark charcoal, mid grey and a few lighter greys, with rough saw marks and open grain. It resembles old scaffold boards or driftwood, solid and lived-in.

              • Super Matt, no shine

                Finish SU is Super Matt, so the weathered pattern keeps its soft, dry look. The laminate resists stains and everyday scratches and does not need oil, wax or sealing.

              • Linen Block Wood as the twin

                Linen Block Wood (K029SU) is printed on the splashback reverse. Order a 100mm upstand to finish the wall, or specify breakfast bars for an island with stools.

              Industrial grey wood for lofts and bar-style kitchens

              Java Block Wood has the feel of a converted warehouse. It suits black or charcoal units, exposed brick, steel handles and matt black taps. The varied grey planks hide crumbs and light marks, which helps in a busy kitchen or a garage conversion. Pair it with white tiles for contrast, or with warm oak floors so the grey looks cooler still. Linen Block Wood offers the softer version.

              Compare wood effect worktops

              How to fit

              Fitting Java Block Wood

              Java Block Wood combines dark and light planks, so the layout matters more than the cut. Check the mix of tones on each board, then protect the 3mm rounded front of the 38mm postformed edge.

              What you’ll need

              Most homes have these already:

              • Pencil
              • Drill driver
              • Circular saw or jigsaw
              • Straight edge or spirit level

              Tap to add the brands fitters use to your order:

              Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

              Sizes and prices

              Prices include VAT and free delivery. Java Block Wood is supplied in full 3m and 4.1m lengths, uncut.

              ShapeProductSize (L x D x T)PriceBuy
              Worktop 3m · 38mm postformed 3000 × 600 × 38mm £118.27
              Worktop 4.1m · 38mm postformed 4100 × 600 × 38mm £160.56
              Breakfast bar 665mm · 38mm postformed 4100 × 665 × 38mm £275.88
              Breakfast bar 900mm · 38mm postformed 4100 × 900 × 38mm £274.13
              Matching upstand · 4.1m 4100 × 100 × 22mm £86.80
              Matching upstand · 3m 3000 × 100 × 22mm £65.97
              Matching splashback · 4.1m 4100 × 640 × 10mm £222.13
              Edging strip · 45mm laminate edging 1300mm length £2.52
              Joining strips · Straight 38mm Aluminium, 38mm × 640mm £9.99
              Joining strips · Corner 38mm Aluminium, 38mm × 640mm £11.99
              End caps · Left 38mm Aluminium, 38mm × 640mm £7.99
              End caps · Right 38mm Aluminium, 38mm × 640mm £7.99
              Fitting kit · Joint kit 3 connector bolts + sealant £12.99

              Specification

              BrandKronospan Finesse
              Decor codeK030
              FinishSuper Matt (SU)
              EdgePostformed, 3mm radius
              Thickness38mm
              Depth600mm; breakfast bars 665mm and 900mm
              Lengths3000mm, 4100mm
              CoreChipboard core under a high-pressure laminate surface
              Matching upstand4100 x 100 x 22mm
              Matching splashback4100 x 640 x 10mm, double-sided with K029SU Linen Block Wood
              WarrantyManufacturer’s warranty

              Questions about Java Block Wood

              Can’t find your answer? Contact our worktop team.

              Is this a grey or a brown plank mix?

              The swatch is grey: charcoal, mid and light grey planks with a weathered look, not a brown timber. Any warmth is slight and comes from the grain marks.

              How busy is the plank pattern?

              Fairly busy, with varied plank lengths and tones. That makes joins less visible, but it suits a simple cabinet colour better than a heavily patterned one.

              How deep are the bars for an island?

              You can choose 665mm or 900mm depth, each as a 38mm board with the same postformed front edge as the 600mm-deep worktops. Both run the full 4100mm.

              Will it work with white units?

              Yes. White shaker doors give crisp contrast with the grey planks, and black handles keep the industrial mood. Navy and green units look good too.

              How do I link two lengths on an L-shape?

              A worktop jig lets you mitre the corner, and an aluminium joining strip is the alternative. Either suits the rounded edge. Seal the join well against moisture.

              Which decor is on the splashback reverse?

              Linen Block Wood, code K029SU, the paler sibling with a cream and sand mix. Fix whichever face fits the scheme.

              Your basket (0)

              Your basket is empty.

              Shop worktops

              Your delivery postcode

              We’ll use it to show your delivery dates across the site.