0330 000 0000 Email our team

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.
Show prices Inc. VAT
0
Show prices Inc. VAT
Call 0330 000 0000
0
  • Endgrain Cognac Laminate Worktop, Endgrain Cognac colour swatch
studioShowing: 38mm square edge, 3m contract

studio · 5413 AW

Endgrain Cognac Laminate Worktop

Rich cognac-brown oak, with a patch of concentric growth rings as if the timber had been cut across the trunk, plus knots in the surrounding grain. This 38mm square edge laminate worktop is one of the warmest oak effect decors, in full 3050mm lengths.

Thickness and edge
Size
Total inc VAT £128.78

Free delivery on this order

4 interest-free payments of £32.19
or 3 interest-free payments of £42.92

18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

You’ll see your delivery date after adding to basket.

  • Square edge, 38mm thick only
  • Finish AW, laminate on chipboard
  • Upstand and splashback printed to match
  • 3050 x 620mm lengths, 900mm bar top
  • Free deliveryNext working day to most of the UK*
  • Full lengthsDelivered uncut, ready to fit
  • Pay your wayCard, Clearpay or Klarna
Description

Rich cognac-brown oak, with a patch of concentric growth rings as if the timber had been cut across the trunk, plus knots in the surrounding grain. This 38mm square edge laminate worktop is one of the warmest oak effect decors, in full 3050mm lengths.

Delivery

Endgrain Cognac arrives in full lengths up to 4.1m on our own vehicles, with free delivery to every postcode we serve. Most of England and Wales gets it the next working day: check your date below. We confirm your slot the day before, and delivery is kerbside, so have a second person ready to carry it in.
Returns

Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

Care and cleaning

A damp cloth with warm soapy water is enough for daily cleaning, followed by a dry wipe. Mid-brown surfaces show pale cleaner residue, so rinse well. Set hot pans down on a trivet.

Which edge?

  • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
  • Square edge: a sharp, modern line with a matching edge strip.
  • Compact: 12mm solid board, slim and waterproof.
More on edges and thickness

Fitting in four steps

  • Measure, then cut face down with a fine-tooth blade.
  • Lay it on the units and screw up through the brackets.
  • Seal the cut edges, then fit the upstand and end caps.
Read the full fitting guide

How to measure

  • Measure each wall run along the back, in millimetres.
  • Add about 50mm to every run so you can trim to a clean fit.
  • In an L-shape, let the longest run go into the corner.
Full measuring guide

Size guide

  • Worktops come 3000mm or 4100mm long and 600mm deep.
  • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
  • Buy a length that covers your run, then cut it to fit.
Full sizes and heights guide

Why you’ll love it

  • Growth rings set into brown grain

    A circular cluster of tree rings sits within long cognac-brown grain and a few knots. It is a bolder print than a plain oak, and gives a run of worktop a real focal point.

  • Everyday toughness in finish AW

    The AW laminate surface resists stains and everyday scratches, and there is nothing to seal or oil. Underneath is chipboard, so keep cut ends covered with edging strip.

  • Accessories from the same pattern

    Order a 3000 x 100 x 20mm upstand, a 3000 x 600 x 6mm splashback or the 3050 x 900mm breakfast bar. A lighter sibling, Oak Endgrain Classic, shares the ring motif.

A statement oak for a warm, traditional kitchen

The ring pattern turns an ordinary run of units into something with a story. Cognac brown flatters cream, olive and deep green cabinetry, and picks up brass or copper fittings. Because the print is busy, keep splashbacks and walls plain. If you want the same motif in a golden, lighter tone, Oak Endgrain Classic is the neighbouring decor, and both use the same sizes.

Browse oak effect worktops

How to fit

Fitting Endgrain Cognac

Endgrain Cognac is a 38mm square edge decor. The ring panel is the feature, so decide where it falls before you cut, and keep it away from corner joints where the seam would interrupt it.

  1. Step 1

    Place the rings

    Rest the 3050mm length on the units and see where the ring patch lies. Slide it so the feature sits in view, then mark the finished length.

  2. Step 2

    Trim to length

    Run masking tape over the pencil line and saw with a fine-tooth blade. Hold the offcut as you finish, since a falling offcut can tear the brown surface.

  3. Step 3

    Joint up

    Where two runs meet, pull square butt joints tight using connector bolts below. Smooth colour-matched sealant into the seam, working it flush with the dark grain.

  4. Step 4

    Close the ends

    Fix the matching edging strip over exposed chipboard and trim it level. Add silicone against the wall so spills cannot track behind the top.

What you’ll need

Most homes have these already:

  • Pencil
  • Drill driver
  • Circular saw or jigsaw
  • Straight edge or spirit level

Tap to add the brands fitters use to your order:

Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

Sizes and prices

Prices include VAT and free delivery. Endgrain Cognac is supplied in full 3m and 4.1m lengths, uncut.

ProductSize (L x D x T)Price
Worktop 3.05m · 38mm square edge, 3m contract 3050 x 620 x 38mm £128.78
Breakfast bar 900mm · 38mm square edge, 3m contract 3050 x 900 x 38mm £218.09
Matching Upstand · 3m 3000 x 100 x 20mm £53.27
Matching Splashback · 3m 3000 x 600 x 6mm £139.12
ABS Edging Strip 43mm Per metre £5.77
Aluminium Worktop Joining Strips · Straight 38mm Aluminium, 38mm x 640mm £9.99
Aluminium Worktop Joining Strips · Corner 38mm Aluminium, 38mm x 640mm £11.99
Aluminium Worktop End Caps · Left 38mm Aluminium, 38mm x 640mm £7.99
Aluminium Worktop End Caps · Right 38mm Aluminium, 38mm x 640mm £7.99
Worktop Joint Fitting Kit 3 connector bolts + sealant £12.99

Specification

Brandstudio
Decor code5413
FinishAW
EdgeSquare edged
Thickness38mm
Depth620mm; breakfast bars 900mm
Lengths3050mm
CoreChipboard core under a high-pressure laminate surface
Matching upstand3000 x 100 x 20mm
Matching splashback3000 x 600 x 6mm
WarrantyManufacturer’s warranty

Questions about Endgrain Cognac

Can’t find your answer? Contact our worktop team.

How big is the Endgrain Cognac range?

One thickness is listed: 38mm square edge. The worktop is 3050mm long and 620mm deep, and the breakfast bar keeps the length but is 900mm deep.

Is the ring pattern the same on every length?

The pattern is a printed decor, so check the ring panel on each length when you unpack, and plan its position before you cut.

What goes well with a cognac oak?

Olive, forest green and cream units pair well, and brass handles echo the warm tone. Keep walls calm so the worktop remains the feature.

How is it different from Oak Endgrain Classic?

Both share the growth-ring look and the same sizes. Cognac is the deeper brown, while Classic is a lighter golden oak, so pick by how much warmth you want.

Can I add a matching splashback?

Yes. The 6mm splashback is 3000 x 600mm, and the upstand is 3000mm long and 100mm high. Both carry the same cognac print.

Can the top be mitred at a corner?

A 38mm square edge top is normally butt-jointed with connector bolts and sealant. That works neatly here, as the busy print distracts from the seam.

More Oak & Wood Effect looks

View all

Kitchen Ideas, New Colours & The Odd Offer

One email a month, written by people who know worktops. Unsubscribe whenever you like.

By signing up you agree to receive marketing emails. Read our privacy policy.

Your basket (0)

Your basket is empty.

Shop worktops