Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.

Show prices Inc. VAT

TopShape

Lorenzo Laminate Worktop

A pale, softly grey-tinged wood grain with a long, gentle figure and a hairline split down one side. Lorenzo is a TopShape laminate worktop with a decorative square edge, in 40mm or 25mm, with matching pieces in 4000mm and 3600mm lengths.

Thickness and edge
Size
Total inc VAT £358.00

Free delivery on this order

4 interest-free payments of £89.50
or 3 interest-free payments of £119.33

18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

You’ll see your delivery date after adding to basket.

  • Pale wood grain, 40mm or 25mm
  • 4000mm tops, 650mm or 900mm deep
  • Square edge with decor on both faces
  • Upstand, backsplash, utility panel, edging
  • Free deliveryNext working day to most of the UK*
  • Full lengthsDelivered uncut, ready to fit
  • Pay your wayCard, Clearpay or Klarna
Description

A pale, softly grey-tinged wood grain with a long, gentle figure and a hairline split down one side. Lorenzo is a TopShape laminate worktop with a decorative square edge, in 40mm or 25mm, with matching pieces in 4000mm and 3600mm lengths.

Delivery

Lorenzo arrives in full lengths up to 4.1m on our own vehicles, with free delivery to every postcode we serve. Most of England and Wales gets it the next working day: check your date below. We confirm your slot the day before, and delivery is kerbside, so have a second person ready to carry it in.

Returns

Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

Care and cleaning

Clean with warm soapy water and dry with a soft cloth, because a pale surface shows water marks. Avoid abrasive pads. Lift hot pans onto a trivet, not the bare surface.

Which edge?

  • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
  • Square edge: a sharp, modern line with a matching edge strip.
  • Compact: 12mm solid board, slim and waterproof.
More on edges and thickness

Fitting in four steps

  • Measure, then cut face down with a fine-tooth blade.
  • Lay it on the units and screw up through the brackets.
  • Seal the cut edges, then fit the upstand and end caps.
Read the full fitting guide

How to measure

  • Measure each wall run along the back, in millimetres.
  • Add about 50mm to every run so you can trim to a clean fit.
  • In an L-shape, let the longest run go into the corner.
Full measuring guide

Size guide

  • Worktops come 3000mm or 4100mm long and 600mm deep.
  • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
  • Buy a length that covers your run, then cut it to fit.
Full sizes and heights guide

Why you’ll love it

  • Pale grain with a grey cast

    Long, soft grain in a light beige-grey runs down the surface, with one fine split. It is a restrained wood look rather than a bold, knotty one.

  • Both faces of the edge laminated

    The decorative square edge carries the decor on both sides, so the front matches the top. Below the surface is chipboard, which needs sealed ends.

  • A full family of matching parts

    Choose the 3600 x 125 x 18mm upstand, 3000 x 1200 x 8mm backsplash, 3600 x 350 x 18mm utility panel or 5000mm edging roll in the same grain.

A pale wood for Scandinavian and neutral schemes

Pale, grey-leaning wood suits Scandinavian-style kitchens, where light surfaces and simple lines dominate. Combine it with white, soft grey or muted green units. Its low contrast helps small rooms feel larger, and the quiet grain keeps the focus on cabinets and lighting, so the scheme stays calm. The 25mm option gives a slim, modern edge, and the 900mm top is useful for wider islands.

View all laminate worktops

How to fit

Fitting Lorenzo

Lorenzo is a 4000mm square edge decor in 40mm and 25mm. A pale wood grain shows pencil lines and dust, so use tape for every mark and clear debris before joining or edging.

  1. Step 1

    Tape every mark

    Use masking tape for all cut lines and cut-out outlines. Pencil is easy to smudge on a pale surface and harder to remove than it looks.

  2. Step 2

    Cut with support

    Rest the 4000mm top on trestles either side of the line and use a fine-tooth blade. A light touch avoids chipping the decorative edge.

  3. Step 3

    Join the lengths

    Butt corners together using connector bolts from below and colour-matched sealant. Keep the long grain running the same way on both pieces.

  4. Step 4

    Edge and seal

    Iron the matching edging from the 5000mm roll onto raw ends, trim flush, and seal the wall line and sink cut-out with silicone.

What you’ll need

Most homes have these already:

  • Pencil
  • Drill driver
  • Circular saw or jigsaw
  • Straight edge or spirit level

Tap to add the brands fitters use to your order:

Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

Sizes and prices

Prices include VAT and free delivery. Lorenzo is supplied in full 3m and 4.1m lengths, uncut.

ProductSize (L x D x T)Price
Worktop 4m · 40mm square edge 4000 x 650 x 40mm £358.00
Worktop 4m, 900 deep · 40mm square edge 4000 x 900 x 40mm £555.98
Worktop 4m · 25mm square edge 4000 x 650 x 25mm £311.89
Worktop 4m, 900 deep · 25mm square edge 4000 x 900 x 25mm £528.62

Specification

BrandTopShape
EdgeDecorative square edge, laminated both sides
Thickness40mm or 25mm
Depth650mm, 900mm
Lengths4000mm
CoreChipboard core under a high-pressure laminate surface
Matching upstand3600 x 125 x 18mm
Matching splashback3000 x 1200 x 8mm
WarrantyManufacturer’s warranty

Questions about Lorenzo

Can’t find your answer? Contact our worktop team.

What is the Lorenzo grain like?

It is a pale, softly grey-tinged wood grain with a long figure and a fine split. It is a wood look rather than a named oak, so judge the tone against your cabinets.

What sizes can I order?

Tops are 4000mm long, in 650mm or 900mm depth, and in 40mm or 25mm thickness. All have a decorative square edge.

Which cabinets suit a pale wood?

White, soft grey and muted green suit it, and black handles add definition. For warmth, add brass or oak accessories.

What is the neatest way to turn a corner?

Butt-joint the lengths with connector bolts underneath and colour-matched sealant on the seam. Keep the grain direction the same on both.

Is a matching upstand part of the range?

Yes. The upstand is 3600 x 125 x 18mm, and a 3000 x 1200 x 8mm backsplash and a 3600 x 350 x 18mm panel are also listed.

Does 25mm suit a utility room?

It can. The slim top suits a laundry run, provided it is well supported and every cut end and sink cut-out is sealed.

Your basket (0)

Your basket is empty.

Shop worktops