0330 000 0000 Email our team

Order by 4pm for next working day delivery*

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.
Show prices Inc. VAT
0
Show prices
Call 0330 000 0000
0
  • Grey Craft Oak colour swatch
Kronospan FinesseShowing: 38mm postformed

Kronospan Finesse · K002 FP· Fine Pore

Grey Craft Oak Laminate Worktop

A soft, grey-washed oak with a fine pore texture, popular with white, sage and navy kitchens. Supplied as a 38mm postformed worktop with matching breakfast bars, upstand and splashback, at one of our keenest prices.

Colour: Grey Craft OakAll Oak & Wood Effect Worktops
  • Bijoux Oak Laminate Worktop colour swatch
  • Grey Craft Oak Laminate Worktop colour swatch
  • Light Porterhouse Oak Laminate Worktop colour swatch
  • Natural Oak Block Laminate Worktop colour swatch

Each colour has its own page. Tap a swatch to switch.

Thickness and edge
Size

What's an upstand?

Upstand, 100mm highWorktop 100mm high 22mm thick Silicone bead 600mm deep worktop Wall

What it is

A 100mm-high strip in Grey Craft Oak, the same decor as your worktop. It sits along the back edge of the worktop, against the wall.

Why you need one

Walls are rarely straight, so there's nearly always a gap between worktop and wall. An upstand covers it, stops water and crumbs getting down the back, and gives a neat finished line. It's the simplest, cheapest way to finish a worktop.

Sizes

    Most kitchens need one length per wall run.

    Fitting

    Cut it to length with a fine-tooth saw and bond it to the wall with grab adhesive. Run a bead of clear or matching silicone along the bottom edge, and finish any exposed ends with an end cap.

    Upstand or splashback?

    Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

    Read the full fitting guide

    What's a splashback?

    Splashbackupstand heightHob and oven 640mm high 10mm thick Worktop Wall

    What it is

    A full-height panel in Grey Craft Oak, the same decor as your worktop, fixed to the wall behind the hob or sink.

    Why choose one

    One continuous wipe-clean surface with no grout lines, so there's nothing to stain or scrub between tiles. It protects the wall from splashes and cooking grease, and makes the worktop and wall look like one piece.

    Sizes

      Behind a hob

      Check the minimum clearance to a laminate panel in your hob's installation manual. Gas hobs usually need more space, or a heat-resistant panel behind the burners.

      Fitting

      Cut it to size and bond it to a flat, sound wall with panel adhesive. Seal the bottom edge to the worktop with silicone.

      Upstand or splashback?

      Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

      Read the full fitting guide

      What's an edging strip?

      BeforeCut end: barechipboard core AfterEdging strip,45mm wide, coversa cut end

      What it is

      A strip in Grey Craft Oak that covers the cut end of the worktop. It comes pre-glued, or is fixed with contact adhesive.

      When you need it

      Whenever a cut end is on show: at the end of a run, on a breakfast bar, or anywhere you've cut a length down.

      Sizes

        Fitting

        1. Glue Spread contact adhesive on the end and the strip, or warm a pre-glued strip.
        2. Press Press it on firmly from the middle outwards, with a block of wood.
        3. Trim and file Trim the overhang with a sharp blade, then file the edges down at a slight angle.
        Read the full fitting guide

        What are joining strips?

        Corner strip (L-shape)Straight stripSeen from above Aluminium strip38mm worktop: use the38mm stripWorktopWorktop

        What it is

        An aluminium strip that joins two worktop lengths without a router or jig. The web slips between the two ends and the cap covers the joint.

        Straight or corner

        Straight: joins two lengths in a line. Corner: makes an L-shaped join where two runs meet.

        Sizes

          Match the strip to your worktop's thickness: a 38mm strip for a 38mm worktop.

          The alternative

          A mason's mitre gives a seamless corner, but it needs a worktop jig and a router. See both options in our fitting guide.

          Read the full fitting guide

          What are end caps?

          BeforeAfterExposed endEnd capScrewed over therounded profile Left end capRight end capYou, facing the worktopWall

          What it is

          An aluminium cap that finishes the exposed end of a postformed worktop, following its rounded front edge.

          Left or right?

          Stand facing the worktop. If the exposed end is on your left, you need a left end cap; if it's on your right, a right end cap.

          Sizes

            Match the cap to your worktop's thickness.

            Fitting

            Hold the cap against the end, drill small pilot holes and screw it on. A thin bead of silicone behind it keeps water out of the end.

            Read the full fitting guide

            What's in the joint kit?

            3 connector boltsJoint sealant Seen from underneathBolts pull the joint tight;sealant keeps water out

            What's in it

            Three connector bolts and a tube of joint sealant: everything to hold one worktop joint together.

            What it's for

            The bolts sit in pockets cut underneath both worktops and pull the joint tight. The sealant goes on the joint faces first, so water can't get into the core.

            How many?

            One kit per worktop joint.

              Read the full fitting guide
              Total inc VAT £118.27

              Free delivery on this order

              4 interest-free payments of £29.56
              or 3 interest-free payments of £39.42

              18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

              Order by 4pm for next working day delivery*

              • 38mm postformed
              • Matching upstand and splashback
              • Full lengths delivered free, uncut and ready to fit
              • Breakfast bars in the same decor
              • Free deliveryNext working day to most of the UK*
              • Full lengthsDelivered uncut, ready to fit
              • Pay your wayCard, Clearpay or Klarna
              Description

              A soft, grey-washed oak with a fine pore texture, popular with white, sage and navy kitchens. Supplied as a 38mm postformed worktop with matching breakfast bars, upstand and splashback, at one of our keenest prices.

              Delivery

              Delivered by our specialist worktop delivery partner, in full lengths, flat and protected. Delivery is free to every postcode we serve. Order by 4pm Monday to Friday for next working day delivery to most of England and Wales; orders placed after 4pm, at weekends or on bank holidays are dispatched the next working day, and some areas take 2 to 3 working days. Check your date below. We confirm your slot 24 hours before, and delivery is kerbside, so have a second person ready to carry it in.
              Returns

              Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

              Care and cleaning

              Wipe along the grain with a damp cloth so nothing settles in the pores, then dry. Washing-up liquid is enough for grease. No oil or wax is needed, unlike real wood. Use a trivet for hot pans and a board for chopping.

              Which edge?

              • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
              • Square edge: a sharp, modern line with a matching edge strip.
              • Compact: 12mm solid board, slim and waterproof.
              More on edges and thickness

              Fitting in four steps

              • Measure, then cut face down with a fine-tooth blade.
              • Lay it on the units and screw up through the brackets.
              • Seal the cut edges, then fit the upstand and end caps.
              Read the full fitting guide

              How to measure

              • Measure each wall run along the back, in millimetres.
              • Add about 50mm to every run so you can trim to a clean fit.
              • In an L-shape, let the longest run go into the corner.
              Full measuring guide

              Size guide

              • Worktops come 3000mm or 4100mm long and 600mm deep.
              • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
              • Buy a length that covers your run, then cut it to fit.
              Full sizes and heights guide

              Why you’ll love it

              • Soft grey oak with a fine pore texture

                Grey-washed oak with a fine pore texture and soft cathedral grain, cool rather than yellow.

              • Fine Pore finish

                Kronospan’s Fine Pore texture, a delicate wood pore pressed into the surface so the grain feels like timber. It resists stains and everyday scratches, and never needs sealing.

              • Everything matches

                Grey Craft Oak comes as 38mm postformed worktops, 665mm and 900mm breakfast bars, plus a matching upstand (4100 x 100 x 22mm), a matching splashback (4100 x 640 x 10mm), so the whole kitchen is one decor.

              Grey Craft Oak surface detail surface detail

              Grey oak for a calm, modern kitchen

              Grey-washed oak sits between wood and stone. It brings texture without the yellow of natural oak, so it pairs easily with cool cabinet colours and brushed steel handles.

              Compare all wood effect worktops

              See it in a kitchen

              Three kitchen styles with Grey Craft Oak.

              Grey Craft Oak worktop in a white shaker kitchen
              Grey Craft Oak along the main run
              Grey Craft Oak worktop on an island with a breakfast bar
              Grey Craft Oak as a breakfast bar
              Grey Craft Oak worktop with sage green cabinets
              Grey Craft Oak with the matching upstand

              How to fit

              Fitting Grey Craft Oak

              Most straight runs of Grey Craft Oak are a weekend job. Grey woodgrains show a mismatched joint more than stone does, so take your time lining up the grain at any end-to-end joint.

              What you’ll need

              Most homes have these already:

              • Pencil
              • Drill driver
              • Circular saw or jigsaw
              • Straight edge or spirit level

              Tap to add the brands fitters use to your order:

              Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

              Sizes and prices

              Prices include VAT and free delivery. Grey Craft Oak is supplied in full 3m and 4.1m lengths, uncut.

              ProductSize (L x D x T)Price
              Worktop 3m · 38mm postformed 3000 × 600 × 38mm £118.27
              Worktop 4.1m · 38mm postformed 4100 × 600 × 38mm £160.56
              Breakfast bar 665mm · 38mm postformed 4100 × 665 × 38mm £275.88
              Breakfast bar 900mm · 38mm postformed 4100 × 900 × 38mm £274.13
              Matching upstand · 4.1m 4100 × 100 × 22mm £86.80
              Matching upstand · 3m 3000 × 100 × 22mm £65.97
              Matching splashback · 4.1m 4100 × 640 × 10mm £222.13
              Edging strip · 45mm laminate edging 1300mm length £2.52
              Joining strips · Straight 38mm Aluminium, 38mm × 640mm £9.99
              Joining strips · Corner 38mm Aluminium, 38mm × 640mm £11.99
              End caps · Left 38mm Aluminium, 38mm × 640mm £7.99
              End caps · Right 38mm Aluminium, 38mm × 640mm £7.99
              Fitting kit · Joint kit 3 connector bolts + sealant £12.99

              Specification

              BrandKronospan Finesse
              Decor codeK002 FP
              FinishFine Pore (FP)
              Edge38mm postformed
              Lengths3000mm, 4100mm
              CoreChipboard core under a high-pressure laminate surface
              WarrantyManufacturer’s warranty

              Questions about Grey Craft Oak

              Can’t find your answer? Contact our worktop team.

              0330 000 0000Email us
              What sizes does Grey Craft Oak come in?

              Prices include VAT and free delivery: Worktop 3m (38mm postformed) £118.27; Worktop 4.1m (38mm postformed) £160.56; Breakfast bar 900mm (38mm postformed) £274.13; Breakfast bar 665mm (38mm postformed) £275.88.

              Is Grey Craft Oak rounded or square edge?

              Rounded. It is a postformed worktop, so the laminate wraps the front edge with a soft rounded profile and there is no seam at the front where water can get in. There is no square edge version of this decor.

              How do I join two lengths of Grey Craft Oak at a corner?

              A postformed front edge needs either a mason’s mitre, cut with a worktop jig and router, or an aluminium corner joining strip, which only needs a straight cut. Seal a mitre with colour-matched joint sealant and pull it tight with connector bolts.

              Can I have an undermount sink with Grey Craft Oak?

              No. Laminate worktops have a chipboard core that would be exposed around an undermount cut-out. Choose an inset sink, which sits on top and covers the cut edge. Grey Craft Oak is not made in a 12mm compact version.

              What colour cabinets go with Grey Craft Oak?

              Navy, sage and white cabinets all sit well with it, as do stainless steel appliances. Avoid strongly yellow woods nearby, which make it look greyer.

              Is there a matching upstand and splashback?

              Yes: a matching upstand (4100 x 100 x 22mm), a matching splashback (4100 x 640 x 10mm). Full-height panel behind the hob or sink.

              How do I clean Grey Craft Oak?

              Wipe along the grain with a damp cloth so nothing settles in the pores, then dry. Washing-up liquid is enough for grease. No oil or wax is needed, unlike real wood.

              How heavy is a Grey Craft Oak worktop?

              The worktop 4.1m (4100 x 600 x 38mm) weighs roughly 60kg, so it is a two-person lift. It arrives as one full length, so check there is a clear route through the door and around corners.

              Can I see Grey Craft Oak before I order?

              We don’t sell samples, but the decor code is K002 FP from Kronospan Finesse, so a kitchen showroom that stocks Kronospan can show you the real thing. The close-up photos on this page are true to colour on most screens.

              More oak & wood looks

              View all

              Kitchen Ideas, New Colours & The Odd Offer

              One email a month, written by people who know worktops. Unsubscribe whenever you like.

              By signing up you agree to receive marketing emails. Read our privacy policy.

              Your basket (0)

              Your basket is empty.

              Shop worktops

              Your delivery postcode

              We’ll use it to show your delivery dates across the site.