0330 000 0000 Email our team

Order by 4pm for next working day delivery*

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.
Show prices Inc. VAT
0
Show prices
Call 0330 000 0000
0
  • White Andromeda Glitter Matt Laminate Worktop, White Andromeda colour swatch
Kronospan FinesseShowing: 38mm square edge

Kronospan Finesse · K217 GM· Glitter Matt

White Andromeda Glitter Matt Laminate Worktop

A bright white ground scattered with fine black and grey specks, in the manner of a speckled granite. These granite effect worktops are laminate with a square edge in 38mm or slim 22mm. Add a matching upstand for a clean junction at the wall.

Thickness and edge
Size

What's an upstand?

Upstand, 100mm highWorktop 100mm high 22mm thick Silicone bead 600mm deep worktop Wall

What it is

A 100mm-high strip in White Andromeda Glitter Matt, the same decor as your worktop. It sits along the back edge of the worktop, against the wall.

Why you need one

Walls are rarely straight, so there's nearly always a gap between worktop and wall. An upstand covers it, stops water and crumbs getting down the back, and gives a neat finished line. It's the simplest, cheapest way to finish a worktop.

Sizes

    Most kitchens need one length per wall run.

    Fitting

    Cut it to length with a fine-tooth saw and bond it to the wall with grab adhesive. Run a bead of clear or matching silicone along the bottom edge, and finish any exposed ends with an end cap.

    Upstand or splashback?

    Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

    Read the full fitting guide

    What's a splashback?

    Splashbackupstand heightHob and oven 640mm high 10mm thick Worktop Wall

    What it is

    A full-height panel in White Andromeda Glitter Matt, the same decor as your worktop, fixed to the wall behind the hob or sink.

    Why choose one

    One continuous wipe-clean surface with no grout lines, so there's nothing to stain or scrub between tiles. It protects the wall from splashes and cooking grease, and makes the worktop and wall look like one piece.

    Sizes

      It's double-sided: Black Andromeda is on the reverse, so you can choose which way round to fit it.

      Behind a hob

      Check the minimum clearance to a laminate panel in your hob's installation manual. Gas hobs usually need more space, or a heat-resistant panel behind the burners.

      Fitting

      Cut it to size and bond it to a flat, sound wall with panel adhesive. Seal the bottom edge to the worktop with silicone.

      Upstand or splashback?

      Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

      Read the full fitting guide

      What's an edging strip?

      BeforeCut end: barechipboard core AfterEdging strip,45mm wide, coversa cut end

      What it is

      A strip in White Andromeda Glitter Matt that covers the cut end of the worktop. It comes pre-glued, or is fixed with contact adhesive.

      When you need it

      Whenever a cut end is on show: at the end of a run, on a breakfast bar, or anywhere you've cut a length down.

      Sizes

        Fitting

        1. Glue Spread contact adhesive on the end and the strip, or warm a pre-glued strip.
        2. Press Press it on firmly from the middle outwards, with a block of wood.
        3. Trim and file Trim the overhang with a sharp blade, then file the edges down at a slight angle.
        Read the full fitting guide

        What are joining strips?

        Corner strip (L-shape)Straight stripSeen from above Aluminium strip38mm worktop: use the38mm stripWorktopWorktop

        What it is

        An aluminium strip that joins two worktop lengths without a router or jig. The web slips between the two ends and the cap covers the joint.

        Straight or corner

        Straight: joins two lengths in a line. Corner: makes an L-shaped join where two runs meet.

        Sizes

          Match the strip to your worktop's thickness: a 38mm strip for a 38mm worktop.

          The alternative

          A mason's mitre gives a seamless corner, but it needs a worktop jig and a router. See both options in our fitting guide.

          Read the full fitting guide

          What are end caps?

          BeforeAfterExposed endEnd capScrewed over therounded profile Left end capRight end capYou, facing the worktopWall

          What it is

          An aluminium cap that finishes the exposed end of a postformed worktop, following its rounded front edge.

          Left or right?

          Stand facing the worktop. If the exposed end is on your left, you need a left end cap; if it's on your right, a right end cap.

          Sizes

            Match the cap to your worktop's thickness.

            Fitting

            Hold the cap against the end, drill small pilot holes and screw it on. A thin bead of silicone behind it keeps water out of the end.

            Read the full fitting guide

            What's in the joint kit?

            3 connector boltsJoint sealant Seen from underneathBolts pull the joint tight;sealant keeps water out

            What's in it

            Three connector bolts and a tube of joint sealant: everything to hold one worktop joint together.

            What it's for

            The bolts sit in pockets cut underneath both worktops and pull the joint tight. The sealant goes on the joint faces first, so water can't get into the core.

            How many?

            One kit per worktop joint.

              Read the full fitting guide
              Total inc VAT £217.71

              Free delivery on this order

              4 interest-free payments of £54.42
              or 3 interest-free payments of £72.57

              18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

              Order by 4pm for next working day delivery*

              • Square edge, 38mm or 22mm, ABS in white
              • Glitter Matt look, code K217 GM
              • 100mm upstand, splashback and two edge strips
              • 3m and 4.1m boards, 900mm bars in both thicknesses
              • Free deliveryNext working day to most of the UK*
              • Full lengthsDelivered uncut, ready to fit
              • Pay your wayCard, Clearpay or Klarna
              Description

              A bright white ground scattered with fine black and grey specks, in the manner of a speckled granite. These granite effect worktops are laminate with a square edge in 38mm or slim 22mm. Add a matching upstand for a clean junction at the wall.

              Delivery

              Delivered by our specialist worktop delivery partner, in full lengths, flat and protected. Delivery is free to every postcode we serve. Order by 4pm Monday to Friday for next working day delivery to most of England and Wales; orders placed after 4pm, at weekends or on bank holidays are dispatched the next working day, and some areas take 2 to 3 working days. Check your date below. We confirm your slot 24 hours before, and delivery is kerbside, so have a second person ready to carry it in.
              Returns

              Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

              Care and cleaning

              White laminate keeps its brightness with regular wiping. Use warm soapy water and a soft cloth, then dry. Stubborn marks respond to a little extra washing-up liquid rather than a scouring pad.

              Which edge?

              • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
              • Square edge: a sharp, modern line with a matching edge strip.
              • Compact: 12mm solid board, slim and waterproof.
              More on edges and thickness

              Fitting in four steps

              • Measure, then cut face down with a fine-tooth blade.
              • Lay it on the units and screw up through the brackets.
              • Seal the cut edges, then fit the upstand and end caps.
              Read the full fitting guide

              How to measure

              • Measure each wall run along the back, in millimetres.
              • Add about 50mm to every run so you can trim to a clean fit.
              • In an L-shape, let the longest run go into the corner.
              Full measuring guide

              Size guide

              • Worktops come 3000mm or 4100mm long and 600mm deep.
              • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
              • Buy a length that covers your run, then cut it to fit.
              Full sizes and heights guide

              Why you’ll love it

              • White with scattered dark flecks

                The dark specks are small and evenly spread, with a few larger ones, so the white looks lively rather than flat. From a distance the worktop reads as bright and almost clinical.

              • Glitter Matt texture, wipe-clean laminate

                The decor is named for the Glitter Matt texture and sits on a laminate face over chipboard. Flecks and crumbs are camouflaged, and the top never calls for sealing.

              • Black Andromeda as the flip side

                A 4100 x 640 x 10mm splashback carries White Andromeda on one face and Black Andromeda on the other. A 38mm postformed White Andromeda is also made for a rounded front edge.

              Crisp white for bright, family-friendly kitchens

              White speckled granite effect is a classic for a reason: it makes a small kitchen feel larger and does not show crumbs. It works with grey, white and wood-tone cabinets, and with chrome fittings. The slim 22mm option is a sensible choice in a flat or rental where you want a lighter profile, and the 38mm board suits a more substantial kitchen.

              Explore granite effect worktops

              How to fit

              Fitting White Andromeda Glitter Matt

              White Andromeda comes as 38mm at 600mm deep and 22mm at 620mm deep, both square edge. The two use different edging strips, so check the thickness before you buy the trims for each cut end.

              What you’ll need

              Most homes have these already:

              • Pencil
              • Drill driver
              • Circular saw or jigsaw
              • Straight edge or spirit level

              Tap to add the brands fitters use to your order:

              Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

              Sizes and prices

              Prices include VAT and free delivery. White Andromeda Glitter Matt is supplied in full 3m and 4.1m lengths, uncut.

              ProductSize (L x D x T)Price
              Worktop 3m · 38mm square edge 3000 × 600 × 38mm £217.71
              Worktop 4.1m · 38mm square edge 4100 × 600 × 38mm £295.55
              Breakfast bar 665mm · 38mm square edge 4100 × 665 × 38mm £486.00
              Breakfast bar 900mm · 38mm square edge 4100 × 900 × 38mm £482.76
              Worktop 4.1m · 22mm square edge 4100 × 620 × 22mm £239.46
              Breakfast bar 900mm · 22mm square edge 4100 × 900 × 22mm £327.27
              Matching upstand · 4.1m 4100 × 100 × 20mm £96.31
              Matching upstand · 3m 3000 × 100 × 20mm £73.20
              Matching splashback · 4.1m 4100 × 640 × 10mm £307.89
              Edging strip · 43mm ABS edging 1300 × 43 × 1.5mm £5.49
              Edging strip · 28mm ABS edging 1300 × 28 × 1.5mm £5.49
              Joining strips · Straight 38mm Aluminium, 38mm × 640mm £9.99
              Joining strips · Corner 38mm Aluminium, 38mm × 640mm £11.99
              Joining strips · Straight 22mm Aluminium, 22mm × 640mm £9.99
              Joining strips · Corner 22mm Aluminium, 22mm × 640mm £11.99
              End caps · Left 38mm Aluminium, 38mm × 640mm £7.99
              End caps · Right 38mm Aluminium, 38mm × 640mm £7.99
              End caps · Left 22mm Aluminium, 22mm × 640mm £7.99
              End caps · Right 22mm Aluminium, 22mm × 640mm £7.99
              Fitting kit · Joint kit 3 connector bolts + sealant £12.99

              Specification

              BrandKronospan Finesse
              Decor codeK217
              FinishGlitter Matt (GM)
              EdgeABS square edge, 1.5mm radius
              Thickness38mm or 22mm
              Depth600mm, 620mm; breakfast bars 665mm and 900mm
              Lengths3000mm, 4100mm
              CoreChipboard core under a high-pressure laminate surface
              Matching upstand4100 x 100 x 20mm
              Matching splashback4100 x 640 x 10mm, double-sided with K218GM Black Andromeda
              WarrantyManufacturer’s warranty

              Questions about White Andromeda Glitter Matt

              Can’t find your answer? Contact our worktop team.

              0330 000 0000Email us
              How heavy is the speckle on White Andromeda?

              It is fine and evenly spread, with dark specks of different sizes on a bright white ground. Up close it is a clear granite pattern. From a few metres away the surface looks mostly white.

              Can I choose slim 22mm and a breakfast bar?

              Yes. In 22mm, you can have the 4100 x 620mm worktop or a 4100 x 900mm breakfast bar. At 38mm there are also boards at 3000mm, plus bars at 665mm and 900mm.

              Is there a rounded-edge version?

              Yes, a separate 38mm postformed White Andromeda product has a rounded front edge. This page covers the square-edge boards. Choose according to whether you prefer a crisp edge or a softer profile.

              Which colour is on the back of the splashback?

              Black Andromeda, code K218 GM. The splashback measures 4100 x 640 x 10mm and has a face of each, so a white kitchen can pick up a dark accent in the same range.

              Does white granite effect show stains?

              The speckle disguises crumbs and small marks. Strong dyes such as turmeric or beetroot are best wiped quickly. The laminate resists most everyday stains if it is cleaned promptly.

              Which handles go well with it?

              Chrome and brushed steel suit the crisp white. Black handles give contrast and echo the dark flecks. On wood-tone units, brass adds warmth against the white.

              More granite looks

              View all

              Kitchen Ideas, New Colours & The Odd Offer

              One email a month, written by people who know worktops. Unsubscribe whenever you like.

              By signing up you agree to receive marketing emails. Read our privacy policy.

              Your basket (0)

              Your basket is empty.

              Shop worktops

              Your delivery postcode

              We’ll use it to show your delivery dates across the site.