Order by 4pm for next working day delivery*

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.

Show prices Inc. VAT

TopShape

Storm Terrazzo Laminate Worktop

Storm Terrazzo is a granite and stone effect decor that takes its look from terrazzo, a chipped-stone floor style loved in retro rooms. This laminate worktop has a flat square edge, with a matching upstand and splashback to finish the wall.

Thickness and edge
Size

What's an upstand?

Upstand, 100mm highWorktop 100mm high 22mm thick Silicone bead 600mm deep worktop Wall

What it is

A 100mm-high strip in Storm Terrazzo, the same decor as your worktop. It sits along the back edge of the worktop, against the wall.

Why you need one

Walls are rarely straight, so there's nearly always a gap between worktop and wall. An upstand covers it, stops water and crumbs getting down the back, and gives a neat finished line. It's the simplest, cheapest way to finish a worktop.

Sizes

    Most kitchens need one length per wall run.

    Fitting

    Cut it to length with a fine-tooth saw and bond it to the wall with grab adhesive. Run a bead of clear or matching silicone along the bottom edge, and finish any exposed ends with an end cap.

    Upstand or splashback?

    Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

    Read the full fitting guide

    What's a splashback?

    Splashbackupstand heightHob and oven 640mm high 10mm thick Worktop Wall

    What it is

    A full-height panel in Storm Terrazzo, the same decor as your worktop, fixed to the wall behind the hob or sink.

    Why choose one

    One continuous wipe-clean surface with no grout lines, so there's nothing to stain or scrub between tiles. It protects the wall from splashes and cooking grease, and makes the worktop and wall look like one piece.

    Sizes

      Behind a hob

      Check the minimum clearance to a laminate panel in your hob's installation manual. Gas hobs usually need more space, or a heat-resistant panel behind the burners.

      Fitting

      Cut it to size and bond it to a flat, sound wall with panel adhesive. Seal the bottom edge to the worktop with silicone.

      Upstand or splashback?

      Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

      Read the full fitting guide

      What's an edging strip?

      BeforeCut end: barechipboard core AfterEdging strip,45mm wide, coversa cut end

      What it is

      A strip in Storm Terrazzo that covers the cut end of the worktop. It comes pre-glued, or is fixed with contact adhesive.

      When you need it

      Whenever a cut end is on show: at the end of a run, on a breakfast bar, or anywhere you've cut a length down.

      Sizes

        Fitting

        1. Glue Spread contact adhesive on the end and the strip, or warm a pre-glued strip.
        2. Press Press it on firmly from the middle outwards, with a block of wood.
        3. Trim and file Trim the overhang with a sharp blade, then file the edges down at a slight angle.
        Read the full fitting guide

        What are joining strips?

        Corner strip (L-shape)Straight stripSeen from above Aluminium strip38mm worktop: use the38mm stripWorktopWorktop

        What it is

        An aluminium strip that joins two worktop lengths without a router or jig. The web slips between the two ends and the cap covers the joint.

        Straight or corner

        Straight: joins two lengths in a line. Corner: makes an L-shaped join where two runs meet.

        Sizes

          Match the strip to your worktop's thickness: a 38mm strip for a 38mm worktop.

          The alternative

          A mason's mitre gives a seamless corner, but it needs a worktop jig and a router. See both options in our fitting guide.

          Read the full fitting guide

          What are end caps?

          BeforeAfterExposed endEnd capScrewed over therounded profile Left end capRight end capYou, facing the worktopWall

          What it is

          An aluminium cap that finishes the exposed end of a postformed worktop, following its rounded front edge.

          Left or right?

          Stand facing the worktop. If the exposed end is on your left, you need a left end cap; if it's on your right, a right end cap.

          Sizes

            Match the cap to your worktop's thickness.

            Fitting

            Hold the cap against the end, drill small pilot holes and screw it on. A thin bead of silicone behind it keeps water out of the end.

            Read the full fitting guide

            What's in the joint kit?

            3 connector boltsJoint sealant Seen from underneathBolts pull the joint tight;sealant keeps water out

            What's in it

            Three connector bolts and a tube of joint sealant: everything to hold one worktop joint together.

            What it's for

            The bolts sit in pockets cut underneath both worktops and pull the joint tight. The sealant goes on the joint faces first, so water can't get into the core.

            How many?

            One kit per worktop joint.

              Read the full fitting guide
              Total inc VAT £358.00

              Free delivery on this order

              4 interest-free payments of £89.50
              or 3 interest-free payments of £119.33

              18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

              Order by 4pm for next working day delivery*

              • Terrazzo look, 40mm or 25mm
              • Square edge laminated both sides
              • Wall pieces and panel in the decor
              • Two depths, each 4000mm in length
              • Free deliveryNext working day to most of the UK*
              • Full lengthsDelivered uncut, ready to fit
              • Pay your wayCard, Clearpay or Klarna
              Description

              Storm Terrazzo is a granite and stone effect decor that takes its look from terrazzo, a chipped-stone floor style loved in retro rooms. This laminate worktop has a flat square edge, with a matching upstand and splashback to finish the wall.

              Delivery

              Delivered by our specialist worktop delivery partner, in full lengths, flat and protected. Delivery is free to every postcode we serve. Order by 4pm Monday to Friday for next working day delivery to most of England and Wales; orders placed after 4pm, at weekends or on bank holidays are dispatched the next working day, and some areas take 2 to 3 working days. Check your date below. We confirm your slot 24 hours before, and delivery is kerbside, so have a second person ready to carry it in.

              Returns

              Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

              Care and cleaning

              Storm Terrazzo comes clean with a soft sponge and mild washing-up liquid. Patterned decors hide crumbs but not grease, so wipe the area behind the hob often. Skip scourers.

              Which edge?

              • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
              • Square edge: a sharp, modern line with a matching edge strip.
              • Compact: 12mm solid board, slim and waterproof.
              More on edges and thickness

              Fitting in four steps

              • Measure, then cut face down with a fine-tooth blade.
              • Lay it on the units and screw up through the brackets.
              • Seal the cut edges, then fit the upstand and end caps.
              Read the full fitting guide

              How to measure

              • Measure each wall run along the back, in millimetres.
              • Add about 50mm to every run so you can trim to a clean fit.
              • In an L-shape, let the longest run go into the corner.
              Full measuring guide

              Size guide

              • Worktops come 3000mm or 4100mm long and 600mm deep.
              • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
              • Buy a length that covers your run, then cut it to fit.
              Full sizes and heights guide

              Why you’ll love it

              • Terrazzo with a stormy name

                Terrazzo is a composite of stone chips, and Storm hints at grey. We do not describe chip colours or sizes, so check the product photos to see how busy the pattern is.

              • A face that handles busy kitchens

                High-pressure laminate resists everyday stains and scratches and wipes down with soapy water. Busy patterns can hide crumbs better than plain colours, though you should still wipe up daily.

              • Terrazzo pieces for wall and ends

                The matching 3600 x 125mm upstand, 3000 x 1200mm splashback, 3600 x 350mm utility panel and 5000mm edging roll all come in the same terrazzo decor.

              A terrazzo look for lively family kitchens

              Terrazzo has become a favourite in retro and Mediterranean-style kitchens, and it gives a plain room some personality. Pair a patterned top with plain, flat doors in white or deep green. The 40mm board gives a robust edge on an island, while the 25mm board suits a utility room or a second run where a lighter line helps. Every cut end, whichever thickness, takes the same matching edging.

              View granite effect worktops

              How to fit

              Fitting Storm Terrazzo

              Storm Terrazzo is a patterned decor, so check how the chips sit across a joint before you cut. Both 40mm and 25mm boards have a square edge, so each cut end needs the matching roll of edging.

              What you’ll need

              Most homes have these already:

              • Pencil
              • Drill driver
              • Circular saw or jigsaw
              • Straight edge or spirit level

              Tap to add the brands fitters use to your order:

              Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

              Sizes and prices

              Prices include VAT and free delivery. Storm Terrazzo is supplied in full 3m and 4.1m lengths, uncut.

              ShapeProductSize (L x D x T)PriceBuy
              Worktop 4m · 40mm square edge 4000 × 650 × 40mm £358.00
              Worktop 4m, 900 deep · 40mm square edge 4000 × 900 × 40mm £555.98
              Worktop 4m · 25mm square edge 4000 × 650 × 25mm £311.89
              Worktop 4m, 900 deep · 25mm square edge 4000 × 900 × 25mm £528.62
              Matching upstand · 3.6m 3600 × 125 × 18mm £78.67
              Matching splashback · Backsplash 3m 3000 × 1200 × 8mm £309.20
              Edging strip · 5m roll 5000mm £54.25
              Joining strips · Straight 38mm Aluminium, 38mm × 640mm £9.99
              Joining strips · Corner 38mm Aluminium, 38mm × 640mm £11.99
              Joining strips · Straight 22mm Aluminium, 22mm × 640mm £9.99
              Joining strips · Corner 22mm Aluminium, 22mm × 640mm £11.99
              End caps · Left 38mm Aluminium, 38mm × 640mm £7.99
              End caps · Right 38mm Aluminium, 38mm × 640mm £7.99
              End caps · Left 22mm Aluminium, 22mm × 640mm £7.99
              End caps · Right 22mm Aluminium, 22mm × 640mm £7.99
              Fitting kit · Joint kit 3 connector bolts + sealant £12.99

              Specification

              BrandTopShape
              EdgeDecorative square edge, laminated both sides
              Thickness40mm or 25mm
              Depth650mm, 900mm
              Lengths4000mm
              CoreChipboard core under a high-pressure laminate surface
              Matching upstand3600 x 125 x 18mm
              Matching splashback3000 x 1200 x 8mm
              WarrantyManufacturer’s warranty

              Questions about Storm Terrazzo

              Can’t find your answer? Contact our worktop team.

              What does a terrazzo look involve?

              Terrazzo is traditionally chips of stone set in a binder. We only know the name, so look at the product photos to see the actual chip size and colour.

              Is Storm Terrazzo grey?

              The brief lists it as grey-leaning, and Storm suggests that, but we have no swatch to confirm. The product photos are the best guide.

              Does a patterned worktop hide marks?

              A busy pattern tends to disguise small crumbs and dust better than plain colours. It will not hide grease or spills, so wipe those up promptly.

              Which cabinets suit a terrazzo look?

              Plain flat doors in white, soft grey, deep green or terracotta let the pattern stand out. Simple handles keep the scheme calm.

              Can I mix it with a plain splashback?

              Yes. A plain tiled splashback keeps a busy worktop in balance. Or use the matching 3000 x 1200 x 8mm panel for a continuous terrazzo wall.

              Can I use the 900mm board for an island?

              Yes. The 900mm board gives generous space for an island, and the 650mm board suits standard runs. Support any overhang appropriately.

              Your basket (0)

              Your basket is empty.

              Shop worktops

              Your delivery postcode

              We’ll use it to show your delivery dates across the site.