0330 000 0000 Email our team

Order by 4pm for next working day delivery*

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.
Show prices Inc. VAT
0
Show prices
Call 0330 000 0000
0
  • Rustic Oak Solid Wood Worktop, Rustic Oak colour swatch
Solid hardwoodShowing: 40mm solid oak

Solid hardwood

Rustic Oak Solid Wood Worktop

Honey-toned solid oak made from full-length staves, with dark knots and fine splits that give it a rustic, characterful grain. These solid wood worktops are 40mm or 30mm thick, 620mm deep and up to 4m long, with a matching upstand.

Thickness and edge
Size

What's an upstand?

Upstand, 100mm highWorktop 100mm high 22mm thick Silicone bead 600mm deep worktop Wall

What it is

A 100mm-high strip in Rustic Oak, the same decor as your worktop. It sits along the back edge of the worktop, against the wall.

Why you need one

Walls are rarely straight, so there's nearly always a gap between worktop and wall. An upstand covers it, stops water and crumbs getting down the back, and gives a neat finished line. It's the simplest, cheapest way to finish a worktop.

Sizes

    Most kitchens need one length per wall run.

    Fitting

    Cut it to length with a fine-tooth saw and bond it to the wall with grab adhesive. Run a bead of clear or matching silicone along the bottom edge, and finish any exposed ends with an end cap.

    Upstand or splashback?

    Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

    Read the full fitting guide

    What's a splashback?

    Splashbackupstand heightHob and oven 640mm high 10mm thick Worktop Wall

    What it is

    A full-height panel in Rustic Oak, the same decor as your worktop, fixed to the wall behind the hob or sink.

    Why choose one

    One continuous wipe-clean surface with no grout lines, so there's nothing to stain or scrub between tiles. It protects the wall from splashes and cooking grease, and makes the worktop and wall look like one piece.

    Sizes

      Behind a hob

      Check the minimum clearance to a laminate panel in your hob's installation manual. Gas hobs usually need more space, or a heat-resistant panel behind the burners.

      Fitting

      Cut it to size and bond it to a flat, sound wall with panel adhesive. Seal the bottom edge to the worktop with silicone.

      Upstand or splashback?

      Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

      Read the full fitting guide

      What's an edging strip?

      BeforeCut end: barechipboard core AfterEdging strip,45mm wide, coversa cut end

      What it is

      A strip in Rustic Oak that covers the cut end of the worktop. It comes pre-glued, or is fixed with contact adhesive.

      When you need it

      Whenever a cut end is on show: at the end of a run, on a breakfast bar, or anywhere you've cut a length down.

      Sizes

        Fitting

        1. Glue Spread contact adhesive on the end and the strip, or warm a pre-glued strip.
        2. Press Press it on firmly from the middle outwards, with a block of wood.
        3. Trim and file Trim the overhang with a sharp blade, then file the edges down at a slight angle.
        Read the full fitting guide

        What are joining strips?

        Corner strip (L-shape)Straight stripSeen from above Aluminium strip38mm worktop: use the38mm stripWorktopWorktop

        What it is

        An aluminium strip that joins two worktop lengths without a router or jig. The web slips between the two ends and the cap covers the joint.

        Straight or corner

        Straight: joins two lengths in a line. Corner: makes an L-shaped join where two runs meet.

        Sizes

          Match the strip to your worktop's thickness: a 38mm strip for a 38mm worktop.

          The alternative

          A mason's mitre gives a seamless corner, but it needs a worktop jig and a router. See both options in our fitting guide.

          Read the full fitting guide

          What are end caps?

          BeforeAfterExposed endEnd capScrewed over therounded profile Left end capRight end capYou, facing the worktopWall

          What it is

          An aluminium cap that finishes the exposed end of a postformed worktop, following its rounded front edge.

          Left or right?

          Stand facing the worktop. If the exposed end is on your left, you need a left end cap; if it's on your right, a right end cap.

          Sizes

            Match the cap to your worktop's thickness.

            Fitting

            Hold the cap against the end, drill small pilot holes and screw it on. A thin bead of silicone behind it keeps water out of the end.

            Read the full fitting guide

            What's in the joint kit?

            3 connector boltsJoint sealant Seen from underneathBolts pull the joint tight;sealant keeps water out

            What's in it

            Three connector bolts and a tube of joint sealant: everything to hold one worktop joint together.

            What it's for

            The bolts sit in pockets cut underneath both worktops and pull the joint tight. The sealant goes on the joint faces first, so water can't get into the core.

            How many?

            One kit per worktop joint.

              Read the full fitting guide
              Total inc VAT £203.76

              Free delivery on this order

              4 interest-free payments of £50.94
              or 3 interest-free payments of £67.92

              18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

              Order by 4pm for next working day delivery*

              • Rustic solid oak, knots and variation
              • 40mm or 30mm thick, 620mm deep
              • Lengths of 2000, 3000 and 4000mm
              • 900mm and 960mm deep breakfast bars
              • Free deliveryNext working day to most of the UK*
              • Full lengthsDelivered uncut, ready to fit
              • Pay your wayCard, Clearpay or Klarna
              Description

              Honey-toned solid oak made from full-length staves, with dark knots and fine splits that give it a rustic, characterful grain. These solid wood worktops are 40mm or 30mm thick, 620mm deep and up to 4m long, with a matching upstand.

              Delivery

              Delivered by our specialist worktop delivery partner, in full lengths, flat and protected. Delivery is free to every postcode we serve. Order by 4pm Monday to Friday for next working day delivery to most of England and Wales; orders placed after 4pm, at weekends or on bank holidays are dispatched the next working day, and some areas take 2 to 3 working days. Check your date below. We confirm your slot 24 hours before, and delivery is kerbside, so have a second person ready to carry it in.
              Returns

              Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

              Care and cleaning

              Re-oil rustic oak every few months, and sooner near the sink where water gathers. Wipe spills quickly and use a board and a trivet. Light marks sand out with the grain and disappear once oiled.

              Which edge?

              • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
              • Square edge: a sharp, modern line with a matching edge strip.
              • Compact: 12mm solid board, slim and waterproof.
              More on edges and thickness

              Fitting in four steps

              • Measure, then cut face down with a fine-tooth blade.
              • Lay it on the units and screw up through the brackets.
              • Seal the cut edges, then fit the upstand and end caps.
              Read the full fitting guide

              How to measure

              • Measure each wall run along the back, in millimetres.
              • Add about 50mm to every run so you can trim to a clean fit.
              • In an L-shape, let the longest run go into the corner.
              Full measuring guide

              Size guide

              • Worktops come 3000mm or 4100mm long and 600mm deep.
              • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
              • Buy a length that covers your run, then cut it to fit.
              Full sizes and heights guide

              Why you’ll love it

              • Honey oak with knots and fine splits

                Dark knots and thin streaks break up the golden-honey staves, so the grain looks lively and handmade. It suits a kitchen that celebrates natural timber.

              • Built to be sanded and oiled

                Knots and splits are part of rustic oak, and everyday knocks blend into the grain. Sand a mark out and oil the area to even the colour.

              • Two bar depths, one upstand

                Choose a 3050 x 900 x 40mm or 3050 x 960 x 40mm breakfast bar, with a 3050 x 100 x 25mm upstand for the wall.

              A relaxed oak for farmhouse and modern kitchens

              Rustic oak shows its character on purpose. Painted shaker cabinets in cream, grey-green or dusty blue let the grain stand out. Plain white tiles keep a country kitchen fresh and bright. In a modern room it adds warmth against matt black or handleless doors. Choose it if you like visible knots and variation, because every length will look slightly different.

              Compare solid wood worktops

              How to fit

              Fitting Rustic Oak

              Rustic oak is supplied unfinished at 620mm deep in 2000, 3000 and 4000mm lengths. Oil all faces first, leave a gap for seasonal movement, and keep any sink an inset type.

              What you’ll need

              Most homes have these already:

              • Pencil
              • Drill driver
              • Circular saw or jigsaw
              • Straight edge or spirit level

              Tap to add the brands fitters use to your order:

              Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

              Sizes and prices

              Prices include VAT and free delivery. Rustic Oak is supplied in full 3m and 4.1m lengths, uncut.

              ProductSize (L x D x T)Price
              Worktop 2m · 40mm solid oak 2000 × 620 × 40mm £203.76
              Worktop 3m · 40mm solid oak 3000 × 620 × 40mm £305.30
              Worktop 4m · 40mm solid oak 4000 × 620 × 40mm £407.52
              Breakfast bar 900mm · 40mm solid oak 3050 × 900 × 40mm £494.84
              Breakfast bar 960mm · 40mm solid oak 3050 × 960 × 40mm £527.83
              Worktop 3m · 30mm solid oak 3000 × 620 × 30mm £246.96
              Worktop 4m · 30mm solid oak 4000 × 620 × 30mm £329.27
              Matching upstand · 3.05m 3050 × 100 × 25mm £58.22

              Specification

              BrandSolid hardwood
              EdgeSolid wood
              Thickness40mm or 30mm
              Depth620mm; breakfast bars 900mm and 960mm
              Lengths2000mm, 3000mm, 4000mm
              CoreSolid hardwood staves
              Matching upstand3050 x 100 x 25mm
              WarrantyManufacturer’s warranty

              Questions about Rustic Oak

              Can’t find your answer? Contact our worktop team.

              0330 000 0000Email us
              How many knots and splits should I expect?

              The swatch shows dark knots and fine splits through honey-coloured staves. That variation is part of the rustic grade, and each length will look different from the next.

              Why is rustic oak 620mm deep?

              This range is 620mm deep, slightly less than the 650mm of other solid wood worktops. Check your unit depth and overhang before you order.

              What lengths and thicknesses are available?

              The 40mm worktop comes in 2000, 3000 and 4000mm lengths, and the 30mm one in 3000 and 4000mm. Breakfast bars are 3050mm long, 40mm thick and 900 or 960mm deep.

              Does the upstand match the worktop lengths?

              The upstand is 3050 x 100 x 25mm in the same rustic oak. It is slightly longer than the 3000mm worktop, so allow for the difference when planning the wall run.

              Is it suitable for a country-style kitchen?

              Yes. The knots, splits and honey tone suit shaker and farmhouse cabinets, especially in cream or soft green. It also adds warmth to a modern, plain kitchen.

              Do I oil rustic oak before fitting?

              Yes. It is unfinished, so oil every face, including the cut ends and underside, before it goes in. Re-oil it regularly afterwards to protect the grain.

              More solid wood looks

              View all

              Kitchen Ideas, New Colours & The Odd Offer

              One email a month, written by people who know worktops. Unsubscribe whenever you like.

              By signing up you agree to receive marketing emails. Read our privacy policy.

              Your basket (0)

              Your basket is empty.

              Shop worktops

              Your delivery postcode

              We’ll use it to show your delivery dates across the site.