0330 000 0000 Email our team

Order by 4pm for next working day delivery*

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.
Show prices Inc. VAT
0
Show prices
Call 0330 000 0000
0
  • Rabac Laminate Worktop, Rabac colour swatch
DuropalShowing: 38mm postformed

Duropal · F76028 CA· CA

Rabac Laminate Worktop

A deep blue-grey surface with cloudy charcoal patches and pale scuffs, much like worn slate. It is supplied in full lengths as a 38mm postformed laminate worktop, with breakfast bars and a matching upstand and splashback in the same decor.

Thickness and edge
Size

What's an upstand?

Upstand, 100mm highWorktop 100mm high 22mm thick Silicone bead 600mm deep worktop Wall

What it is

A 100mm-high strip in Rabac, the same decor as your worktop. It sits along the back edge of the worktop, against the wall.

Why you need one

Walls are rarely straight, so there's nearly always a gap between worktop and wall. An upstand covers it, stops water and crumbs getting down the back, and gives a neat finished line. It's the simplest, cheapest way to finish a worktop.

Sizes

    Most kitchens need one length per wall run.

    Fitting

    Cut it to length with a fine-tooth saw and bond it to the wall with grab adhesive. Run a bead of clear or matching silicone along the bottom edge, and finish any exposed ends with an end cap.

    Upstand or splashback?

    Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

    Read the full fitting guide

    What's a splashback?

    Splashbackupstand heightHob and oven 640mm high 10mm thick Worktop Wall

    What it is

    A full-height panel in Rabac, the same decor as your worktop, fixed to the wall behind the hob or sink.

    Why choose one

    One continuous wipe-clean surface with no grout lines, so there's nothing to stain or scrub between tiles. It protects the wall from splashes and cooking grease, and makes the worktop and wall look like one piece.

    Sizes

      Behind a hob

      Check the minimum clearance to a laminate panel in your hob's installation manual. Gas hobs usually need more space, or a heat-resistant panel behind the burners.

      Fitting

      Cut it to size and bond it to a flat, sound wall with panel adhesive. Seal the bottom edge to the worktop with silicone.

      Upstand or splashback?

      Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

      Read the full fitting guide

      What's an edging strip?

      BeforeCut end: barechipboard core AfterEdging strip,45mm wide, coversa cut end

      What it is

      A strip in Rabac that covers the cut end of the worktop. It comes pre-glued, or is fixed with contact adhesive.

      When you need it

      Whenever a cut end is on show: at the end of a run, on a breakfast bar, or anywhere you've cut a length down.

      Sizes

        Fitting

        1. Glue Spread contact adhesive on the end and the strip, or warm a pre-glued strip.
        2. Press Press it on firmly from the middle outwards, with a block of wood.
        3. Trim and file Trim the overhang with a sharp blade, then file the edges down at a slight angle.
        Read the full fitting guide

        What are joining strips?

        Corner strip (L-shape)Straight stripSeen from above Aluminium strip38mm worktop: use the38mm stripWorktopWorktop

        What it is

        An aluminium strip that joins two worktop lengths without a router or jig. The web slips between the two ends and the cap covers the joint.

        Straight or corner

        Straight: joins two lengths in a line. Corner: makes an L-shaped join where two runs meet.

        Sizes

          Match the strip to your worktop's thickness: a 38mm strip for a 38mm worktop.

          The alternative

          A mason's mitre gives a seamless corner, but it needs a worktop jig and a router. See both options in our fitting guide.

          Read the full fitting guide

          What are end caps?

          BeforeAfterExposed endEnd capScrewed over therounded profile Left end capRight end capYou, facing the worktopWall

          What it is

          An aluminium cap that finishes the exposed end of a postformed worktop, following its rounded front edge.

          Left or right?

          Stand facing the worktop. If the exposed end is on your left, you need a left end cap; if it's on your right, a right end cap.

          Sizes

            Match the cap to your worktop's thickness.

            Fitting

            Hold the cap against the end, drill small pilot holes and screw it on. A thin bead of silicone behind it keeps water out of the end.

            Read the full fitting guide

            What's in the joint kit?

            3 connector boltsJoint sealant Seen from underneathBolts pull the joint tight;sealant keeps water out

            What's in it

            Three connector bolts and a tube of joint sealant: everything to hold one worktop joint together.

            What it's for

            The bolts sit in pockets cut underneath both worktops and pull the joint tight. The sealant goes on the joint faces first, so water can't get into the core.

            How many?

            One kit per worktop joint.

              Read the full fitting guide
              Total inc VAT Price on request

              This size is made to order. Add it to a quote and we’ll email you a price within one working day.

              • Postformed 38mm, Quadra 3mm radius front
              • Finish code CA
              • Matching upstand and splashback
              • 3m and 4.1m worktops, 670 and 900mm bars
              • Free deliveryNext working day to most of the UK*
              • Full lengthsDelivered uncut, ready to fit
              • Pay your wayCard, Clearpay or Klarna

              Request a quote

              Your quote: Rabac Laminate Worktop – 38mm postformed / Worktop 3m, 640 deep
              Description

              A deep blue-grey surface with cloudy charcoal patches and pale scuffs, much like worn slate. It is supplied in full lengths as a 38mm postformed laminate worktop, with breakfast bars and a matching upstand and splashback in the same decor.

              Delivery

              Delivered by our specialist worktop delivery partner, in full lengths, flat and protected. Delivery is free to every postcode we serve. Order by 4pm Monday to Friday for next working day delivery to most of England and Wales; orders placed after 4pm, at weekends or on bank holidays are dispatched the next working day, and some areas take 2 to 3 working days. Check your date below. We confirm your slot 24 hours before, and delivery is kerbside, so have a second person ready to carry it in.
              Returns

              Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

              Care and cleaning

              Warm soapy water lifts most marks from Rabac. A quick dry with a soft cloth leaves a clean finish. Keep a trivet under hot pans, and chop on a board rather than the surface.

              Which edge?

              • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
              • Square edge: a sharp, modern line with a matching edge strip.
              • Compact: 12mm solid board, slim and waterproof.
              More on edges and thickness

              Fitting in four steps

              • Measure, then cut face down with a fine-tooth blade.
              • Lay it on the units and screw up through the brackets.
              • Seal the cut edges, then fit the upstand and end caps.
              Read the full fitting guide

              How to measure

              • Measure each wall run along the back, in millimetres.
              • Add about 50mm to every run so you can trim to a clean fit.
              • In an L-shape, let the longest run go into the corner.
              Full measuring guide

              Size guide

              • Worktops come 3000mm or 4100mm long and 600mm deep.
              • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
              • Buy a length that covers your run, then cut it to fit.
              Full sizes and heights guide

              Why you’ll love it

              • A slate-like blue-grey with darker clouds

                The base is a cool grey with a blue-green cast. Charcoal clouds gather in places and lighter scuffs break them up, so the face looks worked rather than flat.

              • Finish code CA

                Rabac is made in Duropal finish code CA. Its laminate face resists stains and everyday scratches, cleans with warm soapy water and needs no sealing or oiling.

              • Wall pieces printed in the same blue-grey

                The upstand measures 4100 x 120 x 19mm and the splashback 4100 x 640mm. Add 670mm or 900mm deep breakfast bars to carry the colour onto an island.

              Dark, calm and easy to live with

              A cloudy dark pattern covers dust and drips better than it looks like it should. Rabac pairs with pale oak or white units for contrast, or with graphite doors for a deep tonal room. In a garage workshop, a utility room or a rental kitchen it takes daily use without looking worn. Only the 38mm postformed edge is made in this decor.

              Browse postformed worktops

              How to fit

              Fitting Rabac

              Rabac is only made as a 38mm postformed worktop, so every cut end takes an end cap or matching edging. Dark decors show pale dust in a fresh cut, so brush each edge clean before you seal it.

              What you’ll need

              Most homes have these already:

              • Pencil
              • Drill driver
              • Circular saw or jigsaw
              • Straight edge or spirit level

              Tap to add the brands fitters use to your order:

              Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

              Sizes and prices

              Prices include VAT and free delivery. Rabac is supplied in full 3m and 4.1m lengths, uncut.

              ProductSize (L x D x T)Price
              Worktop 3m · 38mm postformed 3000 × 600 × 38mm £151.94
              Worktop 4.1m · 38mm postformed 4100 × 600 × 38mm £202.58
              Worktop 3m, 640 deep · 38mm postformed 3000 × 640 × 38mm Price on request
              Worktop 4.1m, 640 deep · 38mm postformed 4100 × 640 × 38mm Price on request
              Breakfast bar 670mm · 38mm postformed 4100 × 670 × 38mm £286.49
              Breakfast bar 900mm · 38mm postformed 4100 × 900 × 38mm £350.80
              Breakfast bar 3m, 670mm · 38mm postformed 3000 × 670 × 38mm Price on request
              Breakfast bar 3m, 900mm · 38mm postformed 3000 × 900 × 38mm Price on request
              Matching upstand · 4.1m 4100 × 120 × 19mm £109.74
              Matching upstand · 3m 3000 × 120 × 19mm £83.40
              Matching splashback · 4.1m 4100 × 640mm £269.07
              Edging strip · 45mm laminate edging 4100mm length £6.84
              Joining strips · Straight 38mm Aluminium, 38mm × 640mm £9.99
              Joining strips · Corner 38mm Aluminium, 38mm × 640mm £11.99
              End caps · Left 38mm Aluminium, 38mm × 640mm £7.99
              End caps · Right 38mm Aluminium, 38mm × 640mm £7.99
              Fitting kit · Joint kit 3 connector bolts + sealant £12.99

              Specification

              BrandDuropal
              Decor codeF76028
              FinishCA
              EdgePostformed Quadra, 3mm radius
              Thickness38mm
              Depth600mm, 640mm; breakfast bars 670mm and 900mm
              Lengths3000mm, 4100mm
              CoreChipboard core under a high-pressure laminate surface
              Matching upstand4100 x 120 x 19mm
              Matching splashback4100 x 640mm
              WarrantyManufacturer’s warranty

              Questions about Rabac

              Can’t find your answer? Contact our worktop team.

              0330 000 0000Email us
              Does Rabac come in a 20mm square edge?

              No. Rabac is made in 38mm postformed only, with a Quadra 3mm radius front edge. If you want a slim square edge, Bellato Grey and Quartz Stone both come in 20mm.

              Is Rabac a blue or a grey?

              It reads as a deep grey with a blue-green cast and charcoal clouds. Judge it beside your cabinet colour in daylight, because grey decors look warmer or cooler as the light changes.

              Which units suit Rabac?

              White, light oak and pale grey units give clear contrast. Graphite, navy and charcoal units make a tonal kitchen. Brushed steel and black handles both work.

              How deep can I go with a Rabac island bar?

              Breakfast bars are 670mm or 900mm deep, each 4.1m long, in 38mm postformed. The 900mm depth leaves room for stools on one side and a run of units on the other.

              How do I join Rabac at a corner?

              Mitre the postformed edge with a worktop jig and router, or use an aluminium joining strip. Mitres need colour-matched sealant, while strips only need two straight cuts.

              Will Rabac take an undermount basin?

              No. The chipboard core has to stay covered, so choose an inset sink and seal the cut-out edges with silicone. Rabac has no compact version.

              More concrete looks

              View all

              Kitchen Ideas, New Colours & The Odd Offer

              One email a month, written by people who know worktops. Unsubscribe whenever you like.

              By signing up you agree to receive marketing emails. Read our privacy policy.

              Your basket (0)

              Your basket is empty.

              Shop worktops

              Your delivery postcode

              We’ll use it to show your delivery dates across the site.