0330 000 0000 Email our team

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.
Show prices Inc. VAT
0
Show prices Inc. VAT
Call 0330 000 0000
0
  • Pietra Travertine Solid Surface Worktop, Travertine colour swatch
PietraShowing: 25mm solid surface

Pietra

Pietra Travertine Solid Surface Worktop

Fine horizontal streaks in soft grey run across a pale, cool ground in Travertine, a layered stone effect in 25mm solid surface. Worktops are 3050mm long and 25mm thick, bars are 900mm deep, and a slim upstand follows the wall.

Thickness and edge
Size
Total inc VAT £838.52

Free delivery on this order

4 interest-free payments of £209.63
or 3 interest-free payments of £279.50

18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

You’ll see your delivery date after adding to basket.

  • Fine horizontal streaks, pale ground
  • 25mm acrylic, one material all through
  • Upstand matched, 3050 x 100 x 12mm
  • Lengths to 3050mm, bars at 900mm deep
  • Free deliveryNext working day to most of the UK*
  • Full lengthsDelivered uncut, ready to fit
  • Pay your wayCard, Clearpay or Klarna
Description

Fine horizontal streaks in soft grey run across a pale, cool ground in Travertine, a layered stone effect in 25mm solid surface. Worktops are 3050mm long and 25mm thick, bars are 900mm deep, and a slim upstand follows the wall.

Delivery

Pietra Travertine arrives in full lengths up to 4.1m on our own vehicles, with free delivery to every postcode we serve. Most of England and Wales gets it the next working day: check your date below. We confirm your slot the day before, and delivery is kerbside, so have a second person ready to carry it in.
Returns

Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

Care and cleaning

Warm soapy water and a soft cloth wipe the surface clean along the direction of the streaks. The care kit pads soften light scratches in the same direction. A trivet takes the heat from hot pans.

Which edge?

  • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
  • Square edge: a sharp, modern line with a matching edge strip.
  • Compact: 12mm solid board, slim and waterproof.
More on edges and thickness

Fitting in four steps

  • Measure, then cut face down with a fine-tooth blade.
  • Lay it on the units and screw up through the brackets.
  • Seal the cut edges, then fit the upstand and end caps.
Read the full fitting guide

How to measure

  • Measure each wall run along the back, in millimetres.
  • Add about 50mm to every run so you can trim to a clean fit.
  • In an L-shape, let the longest run go into the corner.
Full measuring guide

Size guide

  • Worktops come 3000mm or 4100mm long and 600mm deep.
  • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
  • Buy a length that covers your run, then cut it to fit.
Full sizes and heights guide

Why you’ll love it

  • Streaked like layered stone

    Thin soft grey streaks run horizontally along the length, close together, like strata in sawn stone. The ground is pale and cool, so the pattern stays gentle.

  • No pores to fill or seal

    Natural travertine is porous, while this is dense cast acrylic. The streaks sit within the material, and any scuff can be polished with the care kit pads.

  • Island, run and wall edge

    The 2000 x 900 x 25mm breakfast bar and the slim 12mm upstand are cut from the same decor, so streaks line up in direction around the room.

Linear texture for calm, natural kitchens

The horizontal streaking adds quiet rhythm to a long wall run, which suits galley kitchens and wide islands. It pairs with oatmeal, pale green or soft white cabinets and with ash or oak flooring. Because the grain follows the length of the worktop, it guides the eye along the room. It gives a natural stone feel without the weight or care that real travertine brings.

Browse stone effect worktops

How to fit

Fitting Pietra Travertine

Travertine arrives as 3050mm lengths, 25mm thick, and the streaks run along the length. Keep every piece facing the same way, and pass bonded seams to a fitter with the right adhesive and clamps.

  1. Step 1

    Align the streaks

    Lay each length so the horizontal streaks run end to end along the units. Turning one piece round would break the line at the join.

  2. Step 2

    Mark and cut

    Draw the line on masking tape, then cut across the streaks with a fine blade. Support both sides so the offcut does not drop and chip the edge.

  3. Step 3

    Bond the ends

    Adhesive goes on both ends, clamps pull the faces flush and the join is left to cure. Sanded flat, the streaks carry across the seam.

  4. Step 4

    Neaten the wall edge

    Fit the 100mm upstand against the wall, seal the top and bottom with a thin silicone line and buff the sanded area with the care kit pads.

What you’ll need

Most homes have these already:

  • Pencil
  • Drill driver
  • Circular saw or jigsaw
  • Straight edge or spirit level

Tap to add the brands fitters use to your order:

Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

Sizes and prices

Prices include VAT and free delivery. Pietra Travertine is supplied in full 3m and 4.1m lengths, uncut.

ProductSize (L x D x T)Price
Worktop 3.05m · 25mm solid surface 3050 x 650 x 25mm £838.52
Breakfast bar 900mm · 25mm solid surface 2000 x 900 x 25mm £838.52
Travertine Matching Upstand · 3.05m 3050 x 100 x 12mm £89.97

Specification

BrandPietra
EdgeSolid surface
Thickness25mm
Depth650mm; breakfast bars 900mm
Lengths3050mm
CoreSolid surface, the same material all the way through
Matching upstand3050 x 100 x 12mm
WarrantyManufacturer’s warranty

Questions about Pietra Travertine

Can’t find your answer? Contact our worktop team.

Which way do the Travertine streaks run?

They run horizontally along the length of the worktop. Fit each piece with the front edge facing the room and the streaks running the same way throughout the run.

Is it beige like natural travertine?

The swatch shows a pale, cool white-grey with soft grey streaks rather than a warm sandy beige. Check it against your walls and cabinets before you commit.

How long are the lengths?

Worktops are 3050mm long, 650mm deep and 25mm thick. Breakfast bars are 2000mm long and 900mm deep, which suits stools along an island.

Can I join two lengths in an L-shape?

Yes. Pieces are bonded with adhesive and sanded flush, so the corner nearly disappears. This work needs a fitter, who will also clamp the join while it cures.

Does a horizontal grain make a kitchen look longer?

It can. Streaks along the length draw the eye down a run, so a galley or long wall can feel more open. Keep the direction constant for the best effect.

What is the upstand like?

It is a slim 12mm piece, 100mm tall and 3050mm long, with the same streaking as the worktop. It runs along the wall to protect the plaster behind the top.

More Solid Surface looks

View all

Kitchen Ideas, New Colours & The Odd Offer

One email a month, written by people who know worktops. Unsubscribe whenever you like.

By signing up you agree to receive marketing emails. Read our privacy policy.

Your basket (0)

Your basket is empty.

Shop worktops