0330 000 0000 Email our team

Order by 4pm for next working day delivery*

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.
Show prices Inc. VAT
0
Show prices
Call 0330 000 0000
0
  • Jade Laminate Worktop: decor photo coming soon
TopShapeShowing: 40mm square edge

TopShape

Jade Laminate Worktop

Jade takes its name from the gem, so the decor probably leans toward its colour, though we state only the name. This board has a flat square edge in 40mm or 25mm, and the upstand and splashback come in the same decor within the laminate range.

Thickness and edge
Size

What's an upstand?

Upstand, 100mm highWorktop 100mm high 22mm thick Silicone bead 600mm deep worktop Wall

What it is

A 100mm-high strip in Jade, the same decor as your worktop. It sits along the back edge of the worktop, against the wall.

Why you need one

Walls are rarely straight, so there's nearly always a gap between worktop and wall. An upstand covers it, stops water and crumbs getting down the back, and gives a neat finished line. It's the simplest, cheapest way to finish a worktop.

Sizes

    Most kitchens need one length per wall run.

    Fitting

    Cut it to length with a fine-tooth saw and bond it to the wall with grab adhesive. Run a bead of clear or matching silicone along the bottom edge, and finish any exposed ends with an end cap.

    Upstand or splashback?

    Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

    Read the full fitting guide

    What's a splashback?

    Splashbackupstand heightHob and oven 640mm high 10mm thick Worktop Wall

    What it is

    A full-height panel in Jade, the same decor as your worktop, fixed to the wall behind the hob or sink.

    Why choose one

    One continuous wipe-clean surface with no grout lines, so there's nothing to stain or scrub between tiles. It protects the wall from splashes and cooking grease, and makes the worktop and wall look like one piece.

    Sizes

      Behind a hob

      Check the minimum clearance to a laminate panel in your hob's installation manual. Gas hobs usually need more space, or a heat-resistant panel behind the burners.

      Fitting

      Cut it to size and bond it to a flat, sound wall with panel adhesive. Seal the bottom edge to the worktop with silicone.

      Upstand or splashback?

      Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

      Read the full fitting guide

      What's an edging strip?

      BeforeCut end: barechipboard core AfterEdging strip,45mm wide, coversa cut end

      What it is

      A strip in Jade that covers the cut end of the worktop. It comes pre-glued, or is fixed with contact adhesive.

      When you need it

      Whenever a cut end is on show: at the end of a run, on a breakfast bar, or anywhere you've cut a length down.

      Sizes

        Fitting

        1. Glue Spread contact adhesive on the end and the strip, or warm a pre-glued strip.
        2. Press Press it on firmly from the middle outwards, with a block of wood.
        3. Trim and file Trim the overhang with a sharp blade, then file the edges down at a slight angle.
        Read the full fitting guide

        What are joining strips?

        Corner strip (L-shape)Straight stripSeen from above Aluminium strip38mm worktop: use the38mm stripWorktopWorktop

        What it is

        An aluminium strip that joins two worktop lengths without a router or jig. The web slips between the two ends and the cap covers the joint.

        Straight or corner

        Straight: joins two lengths in a line. Corner: makes an L-shaped join where two runs meet.

        Sizes

          Match the strip to your worktop's thickness: a 38mm strip for a 38mm worktop.

          The alternative

          A mason's mitre gives a seamless corner, but it needs a worktop jig and a router. See both options in our fitting guide.

          Read the full fitting guide

          What are end caps?

          BeforeAfterExposed endEnd capScrewed over therounded profile Left end capRight end capYou, facing the worktopWall

          What it is

          An aluminium cap that finishes the exposed end of a postformed worktop, following its rounded front edge.

          Left or right?

          Stand facing the worktop. If the exposed end is on your left, you need a left end cap; if it's on your right, a right end cap.

          Sizes

            Match the cap to your worktop's thickness.

            Fitting

            Hold the cap against the end, drill small pilot holes and screw it on. A thin bead of silicone behind it keeps water out of the end.

            Read the full fitting guide

            What's in the joint kit?

            3 connector boltsJoint sealant Seen from underneathBolts pull the joint tight;sealant keeps water out

            What's in it

            Three connector bolts and a tube of joint sealant: everything to hold one worktop joint together.

            What it's for

            The bolts sit in pockets cut underneath both worktops and pull the joint tight. The sealant goes on the joint faces first, so water can't get into the core.

            How many?

            One kit per worktop joint.

              Read the full fitting guide
              Total inc VAT £358.00

              Free delivery on this order

              4 interest-free payments of £89.50
              or 3 interest-free payments of £119.33

              18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

              Order by 4pm for next working day delivery*

              • Edge squared off, 40mm or 25mm
              • Gem-inspired name, 4000mm lengths
              • Panel, upstand, splashback and edging roll
              • Depths of 650mm or 900mm
              • Free deliveryNext working day to most of the UK*
              • Full lengthsDelivered uncut, ready to fit
              • Pay your wayCard, Clearpay or Klarna
              Description

              Jade takes its name from the gem, so the decor probably leans toward its colour, though we state only the name. This board has a flat square edge in 40mm or 25mm, and the upstand and splashback come in the same decor within the laminate range.

              Delivery

              Delivered by our specialist worktop delivery partner, in full lengths, flat and protected. Delivery is free to every postcode we serve. Order by 4pm Monday to Friday for next working day delivery to most of England and Wales; orders placed after 4pm, at weekends or on bank holidays are dispatched the next working day, and some areas take 2 to 3 working days. Check your date below. We confirm your slot 24 hours before, and delivery is kerbside, so have a second person ready to carry it in.
              Returns

              Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

              Care and cleaning

              Jade can be cleaned with warm soapy water and a soft cloth, then dried with a clean towel. Avoid abrasive pads. Wipe splashes near the sink straight away.

              Which edge?

              • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
              • Square edge: a sharp, modern line with a matching edge strip.
              • Compact: 12mm solid board, slim and waterproof.
              More on edges and thickness

              Fitting in four steps

              • Measure, then cut face down with a fine-tooth blade.
              • Lay it on the units and screw up through the brackets.
              • Seal the cut edges, then fit the upstand and end caps.
              Read the full fitting guide

              How to measure

              • Measure each wall run along the back, in millimetres.
              • Add about 50mm to every run so you can trim to a clean fit.
              • In an L-shape, let the longest run go into the corner.
              Full measuring guide

              Size guide

              • Worktops come 3000mm or 4100mm long and 600mm deep.
              • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
              • Buy a length that covers your run, then cut it to fit.
              Full sizes and heights guide

              Why you’ll love it

              • A decor named after a gemstone

                Jade can mean a green stone or a green shade. The decor name does not confirm either, so we ask you to judge the colour from the product photos, not from this page.

              • Laminate with a chipboard core

                The high-pressure laminate face is hard-wearing and wipes clean with warm soapy water. It resists everyday stains and scratches and needs no sealing, but cut ends must be edged to keep moisture out.

              • Matching pieces keep the colour consistent

                Pick an upstand of 3600 x 125 x 18mm, a splashback of 3000 x 1200 x 8mm, a utility panel and a 5000mm edging roll, all in Jade.

              Choosing between Jade and the neutral decors

              A distinctive name usually means a distinctive colour, so Jade may suit a kitchen where the worktop is the feature rather than the background. Pair it with white or cream units to let it stand out, and keep the splashback plain so the colour leads. If you prefer a quieter scheme, the grey and white decors in the same range share the sizes, edges and matching pieces.

              Browse laminate worktops

              How to fit

              Fitting Jade

              Jade boards are 4000mm long with a square edge in 40mm and 25mm. A feature colour makes the cut ends obvious, so use the colour-matched edging on every end and neaten each seal with silicone.

              What you’ll need

              Most homes have these already:

              • Pencil
              • Drill driver
              • Circular saw or jigsaw
              • Straight edge or spirit level

              Tap to add the brands fitters use to your order:

              Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

              Sizes and prices

              Prices include VAT and free delivery. Jade is supplied in full 3m and 4.1m lengths, uncut.

              ProductSize (L x D x T)Price
              Worktop 4m · 40mm square edge 4000 × 650 × 40mm £358.00
              Worktop 4m, 900 deep · 40mm square edge 4000 × 900 × 40mm £555.98
              Worktop 4m · 25mm square edge 4000 × 650 × 25mm £311.89
              Worktop 4m, 900 deep · 25mm square edge 4000 × 900 × 25mm £528.62
              Matching upstand · 3.6m 3600 × 125 × 18mm £78.67
              Matching splashback · Backsplash 3m 3000 × 1200 × 8mm £309.20
              Edging strip · 5m roll 5000mm £54.25
              Joining strips · Straight 38mm Aluminium, 38mm × 640mm £9.99
              Joining strips · Corner 38mm Aluminium, 38mm × 640mm £11.99
              Joining strips · Straight 22mm Aluminium, 22mm × 640mm £9.99
              Joining strips · Corner 22mm Aluminium, 22mm × 640mm £11.99
              End caps · Left 38mm Aluminium, 38mm × 640mm £7.99
              End caps · Right 38mm Aluminium, 38mm × 640mm £7.99
              End caps · Left 22mm Aluminium, 22mm × 640mm £7.99
              End caps · Right 22mm Aluminium, 22mm × 640mm £7.99
              Fitting kit · Joint kit 3 connector bolts + sealant £12.99

              Specification

              BrandTopShape
              EdgeDecorative square edge, laminated both sides
              Thickness40mm or 25mm
              Depth650mm, 900mm
              Lengths4000mm
              CoreChipboard core under a high-pressure laminate surface
              Matching upstand3600 x 125 x 18mm
              Matching splashback3000 x 1200 x 8mm
              WarrantyManufacturer’s warranty

              Questions about Jade

              Can’t find your answer? Contact our worktop team.

              0330 000 0000Email us
              Is Jade a green worktop?

              The name points to jade, which is often green, but we cannot confirm the colour without a swatch. Please check the product photos before ordering.

              Which thickness shows the colour best?

              Both carry the same decor. The 40mm board gives a broader edge band of colour on the front, while the 25mm board gives a slimmer line.

              Do the matching pieces come in Jade?

              Yes. The 125mm-high upstand, the 8mm splashback, the utility panel and the 5000mm edging roll are all made in the Jade decor.

              How wide are the boards?

              They are 650mm or 900mm deep and 4000mm long. Choose the wider board for islands, or for runs that need extra working depth.

              Can I use a coloured top in a rental?

              You can, but a bold colour suits fewer tenants than a neutral. Check the photos and consider the rest of the property before choosing.

              Will a hob cut-out need extra care?

              Yes. Seal every raw edge with silicone after cutting the opening, so moisture cannot reach the chipboard core underneath it.

              More laminate looks

              View all

              Kitchen Ideas, New Colours & The Odd Offer

              One email a month, written by people who know worktops. Unsubscribe whenever you like.

              By signing up you agree to receive marketing emails. Read our privacy policy.

              Your basket (0)

              Your basket is empty.

              Shop worktops

              Your delivery postcode

              We’ll use it to show your delivery dates across the site.