0330 000 0000 Email our team

Order by 4pm for next working day delivery*

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.
Show prices Inc. VAT
0
Show prices
Call 0330 000 0000
0
  • India White 20mm Square Edge Laminate Worktop, India White colour swatch
DuropalShowing: 20mm square edge

Duropal · S63045 SD· SD

India White 20mm Square Edge Laminate Worktop

Bright white with one thin grey vein, here on a slim 20mm base. This laminate worktop has a crisp, laser-edged square edge instead of a rounded front, and suits slim-line kitchens that want a lighter profile with the same white and vein.

Thickness and edge
Size

What's an upstand?

Upstand, 100mm highWorktop 100mm high 22mm thick Silicone bead 600mm deep worktop Wall

What it is

A 100mm-high strip in India White 20mm Square Edge, the same decor as your worktop. It sits along the back edge of the worktop, against the wall.

Why you need one

Walls are rarely straight, so there's nearly always a gap between worktop and wall. An upstand covers it, stops water and crumbs getting down the back, and gives a neat finished line. It's the simplest, cheapest way to finish a worktop.

Sizes

    Most kitchens need one length per wall run.

    Fitting

    Cut it to length with a fine-tooth saw and bond it to the wall with grab adhesive. Run a bead of clear or matching silicone along the bottom edge, and finish any exposed ends with an end cap.

    Upstand or splashback?

    Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

    Read the full fitting guide

    What's a splashback?

    Splashbackupstand heightHob and oven 640mm high 10mm thick Worktop Wall

    What it is

    A full-height panel in India White 20mm Square Edge, the same decor as your worktop, fixed to the wall behind the hob or sink.

    Why choose one

    One continuous wipe-clean surface with no grout lines, so there's nothing to stain or scrub between tiles. It protects the wall from splashes and cooking grease, and makes the worktop and wall look like one piece.

    Sizes

      Behind a hob

      Check the minimum clearance to a laminate panel in your hob's installation manual. Gas hobs usually need more space, or a heat-resistant panel behind the burners.

      Fitting

      Cut it to size and bond it to a flat, sound wall with panel adhesive. Seal the bottom edge to the worktop with silicone.

      Upstand or splashback?

      Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

      Read the full fitting guide

      What's an edging strip?

      BeforeCut end: barechipboard core AfterEdging strip,45mm wide, coversa cut end

      What it is

      A strip in India White 20mm Square Edge that covers the cut end of the worktop. It comes pre-glued, or is fixed with contact adhesive.

      When you need it

      Whenever a cut end is on show: at the end of a run, on a breakfast bar, or anywhere you've cut a length down.

      Sizes

        Fitting

        1. Glue Spread contact adhesive on the end and the strip, or warm a pre-glued strip.
        2. Press Press it on firmly from the middle outwards, with a block of wood.
        3. Trim and file Trim the overhang with a sharp blade, then file the edges down at a slight angle.
        Read the full fitting guide

        What are joining strips?

        Corner strip (L-shape)Straight stripSeen from above Aluminium strip38mm worktop: use the38mm stripWorktopWorktop

        What it is

        An aluminium strip that joins two worktop lengths without a router or jig. The web slips between the two ends and the cap covers the joint.

        Straight or corner

        Straight: joins two lengths in a line. Corner: makes an L-shaped join where two runs meet.

        Sizes

          Match the strip to your worktop's thickness: a 38mm strip for a 38mm worktop.

          The alternative

          A mason's mitre gives a seamless corner, but it needs a worktop jig and a router. See both options in our fitting guide.

          Read the full fitting guide

          What are end caps?

          BeforeAfterExposed endEnd capScrewed over therounded profile Left end capRight end capYou, facing the worktopWall

          What it is

          An aluminium cap that finishes the exposed end of a postformed worktop, following its rounded front edge.

          Left or right?

          Stand facing the worktop. If the exposed end is on your left, you need a left end cap; if it's on your right, a right end cap.

          Sizes

            Match the cap to your worktop's thickness.

            Fitting

            Hold the cap against the end, drill small pilot holes and screw it on. A thin bead of silicone behind it keeps water out of the end.

            Read the full fitting guide

            What's in the joint kit?

            3 connector boltsJoint sealant Seen from underneathBolts pull the joint tight;sealant keeps water out

            What's in it

            Three connector bolts and a tube of joint sealant: everything to hold one worktop joint together.

            What it's for

            The bolts sit in pockets cut underneath both worktops and pull the joint tight. The sealant goes on the joint faces first, so water can't get into the core.

            How many?

            One kit per worktop joint.

              Read the full fitting guide
              Total inc VAT £304.75

              Free delivery on this order

              4 interest-free payments of £76.18
              or 3 interest-free payments of £101.58

              18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

              Order by 4pm for next working day delivery*

              • Slim 20mm with a laser-edged square front
              • Finish code SD, white with a single grey vein
              • Wall pieces printed in the same bright white
              • Each piece 4100mm long: 640mm worktop, 900mm bar
              • Free deliveryNext working day to most of the UK*
              • Full lengthsDelivered uncut, ready to fit
              • Pay your wayCard, Clearpay or Klarna
              Description

              Bright white with one thin grey vein, here on a slim 20mm base. This laminate worktop has a crisp, laser-edged square edge instead of a rounded front, and suits slim-line kitchens that want a lighter profile with the same white and vein.

              Delivery

              Delivered by our specialist worktop delivery partner, in full lengths, flat and protected. Delivery is free to every postcode we serve. Order by 4pm Monday to Friday for next working day delivery to most of England and Wales; orders placed after 4pm, at weekends or on bank holidays are dispatched the next working day, and some areas take 2 to 3 working days. Check your date below. We confirm your slot 24 hours before, and delivery is kerbside, so have a second person ready to carry it in.
              Returns

              Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

              Care and cleaning

              Wash with warm soapy water on a soft cloth and dry it off. Take care along the thin square edge, where standing water can sit. Hot pans need a trivet under them.

              Which edge?

              • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
              • Square edge: a sharp, modern line with a matching edge strip.
              • Compact: 12mm solid board, slim and waterproof.
              More on edges and thickness

              Fitting in four steps

              • Measure, then cut face down with a fine-tooth blade.
              • Lay it on the units and screw up through the brackets.
              • Seal the cut edges, then fit the upstand and end caps.
              Read the full fitting guide

              How to measure

              • Measure each wall run along the back, in millimetres.
              • Add about 50mm to every run so you can trim to a clean fit.
              • In an L-shape, let the longest run go into the corner.
              Full measuring guide

              Size guide

              • Worktops come 3000mm or 4100mm long and 600mm deep.
              • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
              • Buy a length that covers your run, then cut it to fit.
              Full sizes and heights guide

              Why you’ll love it

              • A single grey vein on bright white

                One thin vein crosses the clean white ground, adding a trace of marble without crowding the surface. On a slim 20mm slab it looks light and precise.

              • A precise edge, no rounding

                The square front is laser edged for a sharp, tidy line. The laminate face holds up to stains and everyday scratches, and a wipe with warm soapy water is enough.

              • Pick the thickness and edge you need

                This slim version sits alongside a 38mm postformed version and a 12mm compact in the same decor, so each room can have the right build. See compact worktops for undermount sinks.

              The slim white for refits and flat-fronted units

              The 20mm square edge suits handleless kitchens and refits where a thinner, more contemporary line is wanted. White with one vein keeps the room bright, and it pairs with grey, black or wood-effect doors. Landlords updating several flats can specify one slim white across the lot. If you prefer a softer, rounded front, choose the 38mm postformed version of this decor. Browse more white worktops as well.

              Compare white worktops

              How to fit

              Fitting India White 20mm Square Edge

              This India White version is 20mm thick with a laser-edged square front, supplied in 4100mm lengths. There is no rounded edge to protect, but the thin top still needs even support along each unit.

              What you’ll need

              Most homes have these already:

              • Pencil
              • Drill driver
              • Circular saw or jigsaw
              • Straight edge or spirit level

              Tap to add the brands fitters use to your order:

              Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

              Sizes and prices

              Prices include VAT and free delivery. India White 20mm Square Edge is supplied in full 3m and 4.1m lengths, uncut.

              ProductSize (L x D x T)Price
              Worktop 4.1m · 20mm square edge 4100 × 640 × 20mm £304.75
              Worktop 4.1m, 600 deep · 20mm square edge 4100 × 600 × 20mm Price on request
              Breakfast bar 900mm · 20mm square edge 4100 × 900 × 20mm £483.26
              Breakfast bar 670mm · 20mm square edge 4100 × 670 × 20mm Price on request
              Matching upstand · 4.1m 4100 × 120 × 19mm £109.74
              Matching splashback · 4.1m 4100 × 640mm £269.07
              Edging strip · 25mm ABS edging Per metre £6.84
              Joining strips · Straight 22mm Aluminium, 22mm × 640mm £9.99
              Joining strips · Corner 22mm Aluminium, 22mm × 640mm £11.99
              End caps · Left 22mm Aluminium, 22mm × 640mm £7.99
              End caps · Right 22mm Aluminium, 22mm × 640mm £7.99
              Fitting kit · Joint kit 3 connector bolts + sealant £12.99

              Specification

              BrandDuropal
              Decor codeS63045
              FinishSD
              EdgeSquare edge, laser edged
              Thickness20mm
              Depth600mm, 640mm; breakfast bars 670mm and 900mm
              Lengths4100mm
              CoreChipboard core under a high-pressure laminate surface
              Matching upstand4100 x 120 x 19mm
              Matching splashback4100 x 640mm
              Compact version12mm compact laminate also available
              WarrantyManufacturer’s warranty

              Questions about India White 20mm Square Edge

              Can’t find your answer? Contact our worktop team.

              0330 000 0000Email us
              How does this differ from the 38mm India White?

              Thickness and edge. This is a slim 20mm worktop with a square, laser-edged front and a finish code of SD, while the other is 38mm with a rounded postformed front.

              What sizes does the slim version come in?

              A worktop 640mm deep and a breakfast bar 900mm deep are listed, both 4100mm long. You or your fitter trim them to length as the run demands.

              Do I need a router for the corners?

              No. A square edge takes a butt joint, pulled together with connector bolts and finished with colour-matched sealant. A router is only needed for postformed mitres.

              Is there a compact option for an undermount sink?

              Yes, the 12mm compact India White, which is solid all the way through. This laminate version suits an inset sink only.

              Will 20mm look too thin on my units?

              It gives a slim, light profile that suits flat-fronted and handleless units. If you prefer a chunkier front, pick the 38mm postformed version instead.

              What matches it on the wall?

              The upstand is 4100 x 120 x 19mm and the splashback 4100 x 640mm, both in the same white with a grey vein.

              More marble effect looks

              View all

              Kitchen Ideas, New Colours & The Odd Offer

              One email a month, written by people who know worktops. Unsubscribe whenever you like.

              By signing up you agree to receive marketing emails. Read our privacy policy.

              Your basket (0)

              Your basket is empty.

              Shop worktops

              Your delivery postcode

              We’ll use it to show your delivery dates across the site.