0330 000 0000 Email our team

Order by 4pm for next working day delivery*

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.
Show prices Inc. VAT
0
Show prices
Call 0330 000 0000
0
  • Grey Galaxy Laminate Worktop, Grey Galaxy colour swatch
Kronospan FinesseShowing: 38mm postformed

Kronospan Finesse · K207 RS· Rough Stone

Grey Galaxy Laminate Worktop

A mid-grey granite effect with soft, cloudy patches and no hard veining, so it reads as quiet stone rather than a busy pattern. This laminate worktop comes as a 38mm postformed length in two ranges, with matching breakfast bars, an upstand and a double-sided splashback.

Thickness and edge
Size

What's an upstand?

Upstand, 100mm highWorktop 100mm high 22mm thick Silicone bead 600mm deep worktop Wall

What it is

A 100mm-high strip in Grey Galaxy, the same decor as your worktop. It sits along the back edge of the worktop, against the wall.

Why you need one

Walls are rarely straight, so there's nearly always a gap between worktop and wall. An upstand covers it, stops water and crumbs getting down the back, and gives a neat finished line. It's the simplest, cheapest way to finish a worktop.

Sizes

    Most kitchens need one length per wall run.

    Fitting

    Cut it to length with a fine-tooth saw and bond it to the wall with grab adhesive. Run a bead of clear or matching silicone along the bottom edge, and finish any exposed ends with an end cap.

    Upstand or splashback?

    Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

    Read the full fitting guide

    What's a splashback?

    Splashbackupstand heightHob and oven 640mm high 10mm thick Worktop Wall

    What it is

    A full-height panel in Grey Galaxy, the same decor as your worktop, fixed to the wall behind the hob or sink.

    Why choose one

    One continuous wipe-clean surface with no grout lines, so there's nothing to stain or scrub between tiles. It protects the wall from splashes and cooking grease, and makes the worktop and wall look like one piece.

    Sizes

      It's double-sided: Black Concrete is on the reverse, so you can choose which way round to fit it.

      Behind a hob

      Check the minimum clearance to a laminate panel in your hob's installation manual. Gas hobs usually need more space, or a heat-resistant panel behind the burners.

      Fitting

      Cut it to size and bond it to a flat, sound wall with panel adhesive. Seal the bottom edge to the worktop with silicone.

      Upstand or splashback?

      Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

      Read the full fitting guide

      What's an edging strip?

      BeforeCut end: barechipboard core AfterEdging strip,45mm wide, coversa cut end

      What it is

      A strip in Grey Galaxy that covers the cut end of the worktop. It comes pre-glued, or is fixed with contact adhesive.

      When you need it

      Whenever a cut end is on show: at the end of a run, on a breakfast bar, or anywhere you've cut a length down.

      Sizes

        Fitting

        1. Glue Spread contact adhesive on the end and the strip, or warm a pre-glued strip.
        2. Press Press it on firmly from the middle outwards, with a block of wood.
        3. Trim and file Trim the overhang with a sharp blade, then file the edges down at a slight angle.
        Read the full fitting guide

        What are joining strips?

        Corner strip (L-shape)Straight stripSeen from above Aluminium strip38mm worktop: use the38mm stripWorktopWorktop

        What it is

        An aluminium strip that joins two worktop lengths without a router or jig. The web slips between the two ends and the cap covers the joint.

        Straight or corner

        Straight: joins two lengths in a line. Corner: makes an L-shaped join where two runs meet.

        Sizes

          Match the strip to your worktop's thickness: a 38mm strip for a 38mm worktop.

          The alternative

          A mason's mitre gives a seamless corner, but it needs a worktop jig and a router. See both options in our fitting guide.

          Read the full fitting guide

          What are end caps?

          BeforeAfterExposed endEnd capScrewed over therounded profile Left end capRight end capYou, facing the worktopWall

          What it is

          An aluminium cap that finishes the exposed end of a postformed worktop, following its rounded front edge.

          Left or right?

          Stand facing the worktop. If the exposed end is on your left, you need a left end cap; if it's on your right, a right end cap.

          Sizes

            Match the cap to your worktop's thickness.

            Fitting

            Hold the cap against the end, drill small pilot holes and screw it on. A thin bead of silicone behind it keeps water out of the end.

            Read the full fitting guide

            What's in the joint kit?

            3 connector boltsJoint sealant Seen from underneathBolts pull the joint tight;sealant keeps water out

            What's in it

            Three connector bolts and a tube of joint sealant: everything to hold one worktop joint together.

            What it's for

            The bolts sit in pockets cut underneath both worktops and pull the joint tight. The sealant goes on the joint faces first, so water can't get into the core.

            How many?

            One kit per worktop joint.

              Read the full fitting guide
              Total inc VAT £118.27

              Free delivery on this order

              4 interest-free payments of £29.56
              or 3 interest-free payments of £39.42

              18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

              Order by 4pm for next working day delivery*

              • 38mm postformed, 3mm or 6mm radius front edge
              • Rough Stone texture, finish code RS
              • Matching 100mm upstand and double-sided splashback
              • 3m, 3.05m and 4.1m lengths, plus 665 and 900mm bars
              • Free deliveryNext working day to most of the UK*
              • Full lengthsDelivered uncut, ready to fit
              • Pay your wayCard, Clearpay or Klarna
              Description

              A mid-grey granite effect with soft, cloudy patches and no hard veining, so it reads as quiet stone rather than a busy pattern. This laminate worktop comes as a 38mm postformed length in two ranges, with matching breakfast bars, an upstand and a double-sided splashback.

              Delivery

              Delivered by our specialist worktop delivery partner, in full lengths, flat and protected. Delivery is free to every postcode we serve. Order by 4pm Monday to Friday for next working day delivery to most of England and Wales; orders placed after 4pm, at weekends or on bank holidays are dispatched the next working day, and some areas take 2 to 3 working days. Check your date below. We confirm your slot 24 hours before, and delivery is kerbside, so have a second person ready to carry it in.
              Returns

              Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

              Care and cleaning

              Wash with warm soapy water, rinse and dry with a soft cloth. If a mark sits in the textured surface, use a soft brush rather than a scourer. Keep hot pans on a trivet and chop on a board.

              Which edge?

              • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
              • Square edge: a sharp, modern line with a matching edge strip.
              • Compact: 12mm solid board, slim and waterproof.
              More on edges and thickness

              Fitting in four steps

              • Measure, then cut face down with a fine-tooth blade.
              • Lay it on the units and screw up through the brackets.
              • Seal the cut edges, then fit the upstand and end caps.
              Read the full fitting guide

              How to measure

              • Measure each wall run along the back, in millimetres.
              • Add about 50mm to every run so you can trim to a clean fit.
              • In an L-shape, let the longest run go into the corner.
              Full measuring guide

              Size guide

              • Worktops come 3000mm or 4100mm long and 600mm deep.
              • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
              • Buy a length that covers your run, then cut it to fit.
              Full sizes and heights guide

              Why you’ll love it

              • Mid-grey with pale, cloudy patches

                A mid-grey base with lighter mottling and a fine grain, like honed granite seen from a distance. There are no strong veins, so the pattern stays even along a long run and sits quietly beside most cabinet colours.

              • Rough Stone texture

                Kronospan’s Rough Stone finish gives the surface a stone-like texture. The laminate resists stains and everyday scratches, and unlike natural granite there is nothing to seal or polish.

              • Two edge radii, one grey

                Finesse lengths have a 3mm radius front edge, while the 3m contract range has a 6mm radius. Upstands come as 4100 x 100 x 22mm or 3000 x 100 x 20mm, with 10mm and 6mm splashbacks.

              A calm grey that works in most rooms

              Grey Galaxy sits comfortably with navy, sage and white shaker doors, and holds its own against black handleless units. In a utility room, rental or trade refit, the 3.05m 3m contract lengths with a 6mm radius are a sensible, hard-wearing pick. For a main kitchen, the Finesse 38mm boards give you the tighter 3mm edge. Real granite needs sealing, but this surface simply wipes clean.

              Browse granite effect worktops

              How to fit

              Fitting Grey Galaxy

              Both Grey Galaxy ranges are postformed, so every corner needs a mason’s mitre cut with a jig, or an aluminium joining strip. Keep to one radius along a run, because the 3mm and 6mm edges will not line up at a joint.

              What you’ll need

              Most homes have these already:

              • Pencil
              • Drill driver
              • Circular saw or jigsaw
              • Straight edge or spirit level

              Tap to add the brands fitters use to your order:

              Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

              Sizes and prices

              Prices include VAT and free delivery. Grey Galaxy is supplied in full 3m and 4.1m lengths, uncut.

              ProductSize (L x D x T)Price
              Worktop 3m · 38mm postformed 3000 × 600 × 38mm £118.27
              Worktop 4.1m · 38mm postformed 4100 × 600 × 38mm £160.56
              Breakfast bar 665mm · 38mm postformed 4100 × 665 × 38mm £275.88
              Breakfast bar 900mm · 38mm postformed 4100 × 900 × 38mm £274.13
              Worktop 3.05m · 38mm postformed, 3m contract 3050 × 600 × 38mm £94.31
              Breakfast bar 900mm · 38mm postformed, 3m contract 3050 × 900 × 38mm £163.40
              Matching upstand · 4.1m 4100 × 100 × 22mm £86.80
              Matching upstand · 3m 3000 × 100 × 22mm £65.97
              Matching splashback · 4.1m 4100 × 640 × 10mm £222.13
              Edging strip · 45mm laminate edging 1300mm length £2.52
              Edging strip · 43mm ABS edging Per metre £5.77
              Joining strips · Straight 38mm Aluminium, 38mm × 640mm £9.99
              Joining strips · Corner 38mm Aluminium, 38mm × 640mm £11.99
              End caps · Left 38mm Aluminium, 38mm × 640mm £7.99
              End caps · Right 38mm Aluminium, 38mm × 640mm £7.99
              Fitting kit · Joint kit 3 connector bolts + sealant £12.99

              Specification

              BrandKronospan Finesse and studio
              Decor codeK207
              FinishRough Stone (RS)
              EdgePostformed, 3mm radius; Postformed, 6mm radius
              Thickness38mm
              Depth600mm; breakfast bars 665mm and 900mm
              Lengths3000mm, 3050mm, 4100mm
              CoreChipboard core under a high-pressure laminate surface
              Matching upstand4100 x 100 x 22mm, 3000 x 100 x 20mm
              Matching splashback4100 x 640 x 10mm, 3000 x 600 x 6mm, double-sided with K205RS Black Concrete
              WarrantyManufacturer’s warranty

              Questions about Grey Galaxy

              Can’t find your answer? Contact our worktop team.

              0330 000 0000Email us
              Which Grey Galaxy lengths and depths can I order?

              Finesse 38mm worktops come in 3000mm and 4100mm lengths, 600mm deep. Breakfast bars run to 4100mm, in 665mm and 900mm depths. The 3m contract range offers 3050mm lengths, 600mm deep, plus a 900mm breakfast bar.

              How does the 3m contract range differ from the Finesse version?

              Both are 38mm postformed in this grey. The 3m contract range is cut at 3050mm and has a larger 6mm radius on the front edge, against 3mm on Finesse. Use one range along any single run so the edges align.

              What cabinet colours go with this grey?

              It suits white, navy, sage and charcoal doors, and works well with black or brushed brass handles. A mid-grey like this is useful when the walls or floor already carry strong colour.

              Which decor shows on the splashback’s other face?

              Each splashback board has two faces: Grey Galaxy on one side and Black Concrete, code K205RS, on the other. Pick whichever you want showing. It comes as 4100 x 640 x 10mm or 3000 x 600 x 6mm.

              Can I fit an undermount sink in this worktop?

              No. An undermount cut-out would expose the chipboard core. Choose an inset sink instead, and seal the cut-out edges with silicone before you lower it in.

              Is it a sensible choice for a utility room or rental?

              Yes. The 3.05m 3m contract boards are made for utility rooms, rentals and trade jobs, and the surface needs no sealing. Add the matching upstand where the worktop meets a wall that gets splashed.

              More granite looks

              View all

              Kitchen Ideas, New Colours & The Odd Offer

              One email a month, written by people who know worktops. Unsubscribe whenever you like.

              By signing up you agree to receive marketing emails. Read our privacy policy.

              Your basket (0)

              Your basket is empty.

              Shop worktops

              Your delivery postcode

              We’ll use it to show your delivery dates across the site.