0330 000 0000 Email our team

Order by 4pm for next working day delivery*

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.
Show prices Inc. VAT
0
Show prices
Call 0330 000 0000
0
  • Grey Atlantic Marble Laminate Worktop, Grey Atlantic Marble colour swatch
Kronospan FinesseShowing: 38mm postformed

Kronospan Finesse · K368 PH· Palazzo Touch

Grey Atlantic Marble Laminate Worktop

A cool grey marble crossed by fine white veins and a few darker fissures. This laminate worktop comes as a 38mm postformed board or a slim 22mm square edge, and there is a 12mm compact version for undermount sinks. An upstand and splashback match the decor.

Thickness and edge
Size

What's an upstand?

Upstand, 100mm highWorktop 100mm high 22mm thick Silicone bead 600mm deep worktop Wall

What it is

A 100mm-high strip in Grey Atlantic Marble, the same decor as your worktop. It sits along the back edge of the worktop, against the wall.

Why you need one

Walls are rarely straight, so there's nearly always a gap between worktop and wall. An upstand covers it, stops water and crumbs getting down the back, and gives a neat finished line. It's the simplest, cheapest way to finish a worktop.

Sizes

    Most kitchens need one length per wall run.

    Fitting

    Cut it to length with a fine-tooth saw and bond it to the wall with grab adhesive. Run a bead of clear or matching silicone along the bottom edge, and finish any exposed ends with an end cap.

    Upstand or splashback?

    Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

    Read the full fitting guide

    What's a splashback?

    Splashbackupstand heightHob and oven 640mm high 10mm thick Worktop Wall

    What it is

    A full-height panel in Grey Atlantic Marble, the same decor as your worktop, fixed to the wall behind the hob or sink.

    Why choose one

    One continuous wipe-clean surface with no grout lines, so there's nothing to stain or scrub between tiles. It protects the wall from splashes and cooking grease, and makes the worktop and wall look like one piece.

    Sizes

      It's double-sided: Cream Navona is on the reverse, so you can choose which way round to fit it.

      Behind a hob

      Check the minimum clearance to a laminate panel in your hob's installation manual. Gas hobs usually need more space, or a heat-resistant panel behind the burners.

      Fitting

      Cut it to size and bond it to a flat, sound wall with panel adhesive. Seal the bottom edge to the worktop with silicone.

      Upstand or splashback?

      Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

      Read the full fitting guide

      What's an edging strip?

      BeforeCut end: barechipboard core AfterEdging strip,45mm wide, coversa cut end

      What it is

      A strip in Grey Atlantic Marble that covers the cut end of the worktop. It comes pre-glued, or is fixed with contact adhesive.

      When you need it

      Whenever a cut end is on show: at the end of a run, on a breakfast bar, or anywhere you've cut a length down.

      Sizes

        Fitting

        1. Glue Spread contact adhesive on the end and the strip, or warm a pre-glued strip.
        2. Press Press it on firmly from the middle outwards, with a block of wood.
        3. Trim and file Trim the overhang with a sharp blade, then file the edges down at a slight angle.
        Read the full fitting guide

        What are joining strips?

        Corner strip (L-shape)Straight stripSeen from above Aluminium strip38mm worktop: use the38mm stripWorktopWorktop

        What it is

        An aluminium strip that joins two worktop lengths without a router or jig. The web slips between the two ends and the cap covers the joint.

        Straight or corner

        Straight: joins two lengths in a line. Corner: makes an L-shaped join where two runs meet.

        Sizes

          Match the strip to your worktop's thickness: a 38mm strip for a 38mm worktop.

          The alternative

          A mason's mitre gives a seamless corner, but it needs a worktop jig and a router. See both options in our fitting guide.

          Read the full fitting guide

          What are end caps?

          BeforeAfterExposed endEnd capScrewed over therounded profile Left end capRight end capYou, facing the worktopWall

          What it is

          An aluminium cap that finishes the exposed end of a postformed worktop, following its rounded front edge.

          Left or right?

          Stand facing the worktop. If the exposed end is on your left, you need a left end cap; if it's on your right, a right end cap.

          Sizes

            Match the cap to your worktop's thickness.

            Fitting

            Hold the cap against the end, drill small pilot holes and screw it on. A thin bead of silicone behind it keeps water out of the end.

            Read the full fitting guide

            What's in the joint kit?

            3 connector boltsJoint sealant Seen from underneathBolts pull the joint tight;sealant keeps water out

            What's in it

            Three connector bolts and a tube of joint sealant: everything to hold one worktop joint together.

            What it's for

            The bolts sit in pockets cut underneath both worktops and pull the joint tight. The sealant goes on the joint faces first, so water can't get into the core.

            How many?

            One kit per worktop joint.

              Read the full fitting guide
              Total inc VAT £160.56

              Free delivery on this order

              4 interest-free payments of £40.14
              or 3 interest-free payments of £53.52

              18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

              Order by 4pm for next working day delivery*

              • Two builds: rounded 38mm or slim 22mm square
              • Palazzo Touch finish, code PH
              • Upstand, splashback and ABS edging strip to match
              • 4.1m boards, plus 900mm breakfast bars in both
              • Free deliveryNext working day to most of the UK*
              • Full lengthsDelivered uncut, ready to fit
              • Pay your wayCard, Clearpay or Klarna
              Description

              A cool grey marble crossed by fine white veins and a few darker fissures. This laminate worktop comes as a 38mm postformed board or a slim 22mm square edge, and there is a 12mm compact version for undermount sinks. An upstand and splashback match the decor.

              Delivery

              Delivered by our specialist worktop delivery partner, in full lengths, flat and protected. Delivery is free to every postcode we serve. Order by 4pm Monday to Friday for next working day delivery to most of England and Wales; orders placed after 4pm, at weekends or on bank holidays are dispatched the next working day, and some areas take 2 to 3 working days. Check your date below. We confirm your slot 24 hours before, and delivery is kerbside, so have a second person ready to carry it in.
              Returns

              Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

              Care and cleaning

              Wipe with warm soapy water and dry with a soft cloth to avoid water spots on the grey. Keep abrasive pads away from the surface. A trivet protects the worktop from hot pans.

              Which edge?

              • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
              • Square edge: a sharp, modern line with a matching edge strip.
              • Compact: 12mm solid board, slim and waterproof.
              More on edges and thickness

              Fitting in four steps

              • Measure, then cut face down with a fine-tooth blade.
              • Lay it on the units and screw up through the brackets.
              • Seal the cut edges, then fit the upstand and end caps.
              Read the full fitting guide

              How to measure

              • Measure each wall run along the back, in millimetres.
              • Add about 50mm to every run so you can trim to a clean fit.
              • In an L-shape, let the longest run go into the corner.
              Full measuring guide

              Size guide

              • Worktops come 3000mm or 4100mm long and 600mm deep.
              • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
              • Buy a length that covers your run, then cut it to fit.
              Full sizes and heights guide

              Why you’ll love it

              • Grey marble with pale, branching veins

                Thin white lines run diagonally across a steady mid-grey ground, with one or two heavier, darker cracks. It reads as natural stone and gives a plain run of cabinets something to look at.

              • Palazzo Touch finish

                The PH finish is Kronospan’s Palazzo Touch. Expect a surface that resists stains and everyday scratches and, as with all this laminate, never needs sealing the way real marble does.

              • Two thicknesses, matching pieces

                Choose 38mm postformed or 22mm square edge. Upstands come in 22mm and 20mm, the 10mm splashback is double-sided with Cream Navona, and a 1300 x 28mm edging strip finishes cut ends on the slim board.

              Grey marble for modern and traditional rooms

              This grey suits white, black and deep green cabinets, and sits well with chrome or brushed steel fittings. The slim 22mm board gives a crisp, lighter edge for contemporary kitchens, while the 38mm postformed board is the sturdier look for family kitchens. If you want to fit an undermount sink, the compact version is the one to look at, since real marble would also need sealing and this does not.

              See all marble effect worktops

              How to fit

              Fitting Grey Atlantic Marble

              The two Grey Atlantic edges fit differently. The 38mm board has a 3mm rounded front edge, so corners need a mitre or joining strip. The 22mm board has a square ABS edge, so corners can be butt-jointed.

              What you’ll need

              Most homes have these already:

              • Pencil
              • Drill driver
              • Circular saw or jigsaw
              • Straight edge or spirit level

              Tap to add the brands fitters use to your order:

              Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

              Sizes and prices

              Prices include VAT and free delivery. Grey Atlantic Marble is supplied in full 3m and 4.1m lengths, uncut.

              ProductSize (L x D x T)Price
              Worktop 3m · 38mm postformed 3000 × 600 × 38mm £118.27
              Worktop 4.1m · 38mm postformed 4100 × 600 × 38mm £160.56
              Breakfast bar 665mm · 38mm postformed 4100 × 665 × 38mm £275.88
              Breakfast bar 900mm · 38mm postformed 4100 × 900 × 38mm £274.13
              Worktop 4.1m · 22mm square edge 4100 × 620 × 22mm £193.12
              Breakfast bar 900mm · 22mm square edge 4100 × 900 × 22mm £280.34
              Matching upstand · 4.1m 4100 × 100 × 22mm £86.80
              Matching upstand · 4.1m (4100 x 100 x 20mm) 4100 × 100 × 20mm £86.80
              Matching upstand · 3m 3000 × 100 × 22mm £65.97
              Matching splashback · 4.1m 4100 × 640 × 10mm £222.13
              Edging strip · 45mm laminate edging 1300mm length £2.52
              Edging strip · 28mm ABS edging 1300 × 28 × 1.5mm £5.49
              Joining strips · Straight 38mm Aluminium, 38mm × 640mm £9.99
              Joining strips · Corner 38mm Aluminium, 38mm × 640mm £11.99
              Joining strips · Straight 22mm Aluminium, 22mm × 640mm £9.99
              Joining strips · Corner 22mm Aluminium, 22mm × 640mm £11.99
              End caps · Left 38mm Aluminium, 38mm × 640mm £7.99
              End caps · Right 38mm Aluminium, 38mm × 640mm £7.99
              End caps · Left 22mm Aluminium, 22mm × 640mm £7.99
              End caps · Right 22mm Aluminium, 22mm × 640mm £7.99
              Fitting kit · Joint kit 3 connector bolts + sealant £12.99

              Specification

              BrandKronospan Finesse
              Decor codeK368
              FinishPalazzo Touch (PH)
              EdgePostformed, 3mm radius; ABS square edge, 1.5mm radius
              Thickness38mm or 22mm
              Depth600mm, 620mm; breakfast bars 665mm and 900mm
              Lengths3000mm, 4100mm
              CoreChipboard core under a high-pressure laminate surface
              Matching upstand4100 x 100 x 22mm, 4100 x 100 x 20mm
              Matching splashback4100 x 640 x 10mm, double-sided with K367PH Cream Navona
              Compact version12mm compact laminate also available
              WarrantyManufacturer’s warranty

              Questions about Grey Atlantic Marble

              Can’t find your answer? Contact our worktop team.

              0330 000 0000Email us
              What sizes does the grey marble come in?

              The 38mm postformed worktop is 3000 or 4100mm long and 600mm deep, with 4100mm breakfast bars at 665 and 900mm. The 22mm square edge is 4100 x 620mm, with a 4100 x 900mm breakfast bar.

              Should I choose 22mm or 38mm?

              Choose 22mm for a slim, modern edge and a lighter board, and 38mm for a deeper, more traditional front edge. Both are laminate over chipboard, and both match the same upstand, splashback and edging range.

              Is there a compact version for an undermount sink?

              Yes. Grey Atlantic Marble is also made as a 12mm compact worktop with the PH finish. Compact is solid all the way through, so it takes an undermount sink where the laminate boards do not.

              How does the splashback look from behind?

              Each 4100 x 640 x 10mm board carries Grey Atlantic Marble on one face and Cream Navona, code K367PH, on the other. Turn it over for a warmer cream marble if you want to change the mood.

              Do the upstands fit both thicknesses?

              The 4100 x 100mm upstand comes in 22mm and 20mm thicknesses. Use the 22mm piece against the 38mm worktop and the 20mm piece with the slim 22mm board, so the proportions stay balanced.

              Which kitchens suit this decor?

              It works with white shaker doors, matt black handleless units and sage or navy cabinets. The cool grey also flatters stainless steel and glass fittings, and pairs well with a pale floor.

              More marble effect looks

              View all

              Kitchen Ideas, New Colours & The Odd Offer

              One email a month, written by people who know worktops. Unsubscribe whenever you like.

              By signing up you agree to receive marketing emails. Read our privacy policy.

              Your basket (0)

              Your basket is empty.

              Shop worktops

              Your delivery postcode

              We’ll use it to show your delivery dates across the site.