0330 000 0000 Email our team

Order by 4pm for next working day delivery*

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.
Show prices Inc. VAT
0
Show prices
Call 0330 000 0000
0
  • Dark Grey Concrete colour swatch
Kronospan FinesseShowing: 38mm postformed

Kronospan Finesse · K201 RS· Rough Stone

Dark Grey Concrete Laminate Worktop

A deep grey concrete with a rough stone texture. It grounds a white or pale wood kitchen and hides everyday marks well. Supplied as a 38mm postformed worktop with matching breakfast bars, upstand and splashback.

Colour: Dark Grey ConcreteAll Stone & Concrete Effect Worktops
  • Light Grey Concrete Laminate Worktop colour swatch
  • Dark Grey Concrete Laminate Worktop colour swatch
  • Crema Limestone Laminate Worktop colour swatch
  • Classic Granite Laminate Worktop colour swatch

Each colour has its own page. Tap a swatch to switch.

Thickness and edge
Size

What's an upstand?

Upstand, 100mm highWorktop 100mm high 22mm thick Silicone bead 600mm deep worktop Wall

What it is

A 100mm-high strip in Dark Grey Concrete, the same decor as your worktop. It sits along the back edge of the worktop, against the wall.

Why you need one

Walls are rarely straight, so there's nearly always a gap between worktop and wall. An upstand covers it, stops water and crumbs getting down the back, and gives a neat finished line. It's the simplest, cheapest way to finish a worktop.

Sizes

    Most kitchens need one length per wall run.

    Fitting

    Cut it to length with a fine-tooth saw and bond it to the wall with grab adhesive. Run a bead of clear or matching silicone along the bottom edge, and finish any exposed ends with an end cap.

    Upstand or splashback?

    Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

    Read the full fitting guide

    What's a splashback?

    Splashbackupstand heightHob and oven 640mm high 10mm thick Worktop Wall

    What it is

    A full-height panel in Dark Grey Concrete, the same decor as your worktop, fixed to the wall behind the hob or sink.

    Why choose one

    One continuous wipe-clean surface with no grout lines, so there's nothing to stain or scrub between tiles. It protects the wall from splashes and cooking grease, and makes the worktop and wall look like one piece.

    Sizes

      Behind a hob

      Check the minimum clearance to a laminate panel in your hob's installation manual. Gas hobs usually need more space, or a heat-resistant panel behind the burners.

      Fitting

      Cut it to size and bond it to a flat, sound wall with panel adhesive. Seal the bottom edge to the worktop with silicone.

      Upstand or splashback?

      Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

      Read the full fitting guide

      What's an edging strip?

      BeforeCut end: barechipboard core AfterEdging strip,45mm wide, coversa cut end

      What it is

      A strip in Dark Grey Concrete that covers the cut end of the worktop. It comes pre-glued, or is fixed with contact adhesive.

      When you need it

      Whenever a cut end is on show: at the end of a run, on a breakfast bar, or anywhere you've cut a length down.

      Sizes

        Fitting

        1. Glue Spread contact adhesive on the end and the strip, or warm a pre-glued strip.
        2. Press Press it on firmly from the middle outwards, with a block of wood.
        3. Trim and file Trim the overhang with a sharp blade, then file the edges down at a slight angle.
        Read the full fitting guide

        What are joining strips?

        Corner strip (L-shape)Straight stripSeen from above Aluminium strip38mm worktop: use the38mm stripWorktopWorktop

        What it is

        An aluminium strip that joins two worktop lengths without a router or jig. The web slips between the two ends and the cap covers the joint.

        Straight or corner

        Straight: joins two lengths in a line. Corner: makes an L-shaped join where two runs meet.

        Sizes

          Match the strip to your worktop's thickness: a 38mm strip for a 38mm worktop.

          The alternative

          A mason's mitre gives a seamless corner, but it needs a worktop jig and a router. See both options in our fitting guide.

          Read the full fitting guide

          What are end caps?

          BeforeAfterExposed endEnd capScrewed over therounded profile Left end capRight end capYou, facing the worktopWall

          What it is

          An aluminium cap that finishes the exposed end of a postformed worktop, following its rounded front edge.

          Left or right?

          Stand facing the worktop. If the exposed end is on your left, you need a left end cap; if it's on your right, a right end cap.

          Sizes

            Match the cap to your worktop's thickness.

            Fitting

            Hold the cap against the end, drill small pilot holes and screw it on. A thin bead of silicone behind it keeps water out of the end.

            Read the full fitting guide

            What's in the joint kit?

            3 connector boltsJoint sealant Seen from underneathBolts pull the joint tight;sealant keeps water out

            What's in it

            Three connector bolts and a tube of joint sealant: everything to hold one worktop joint together.

            What it's for

            The bolts sit in pockets cut underneath both worktops and pull the joint tight. The sealant goes on the joint faces first, so water can't get into the core.

            How many?

            One kit per worktop joint.

              Read the full fitting guide
              Total inc VAT £118.27

              Free delivery on this order

              4 interest-free payments of £29.56
              or 3 interest-free payments of £39.42

              18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

              Order by 4pm for next working day delivery*

              • 38mm postformed
              • Matching upstand and splashback
              • Full lengths delivered free, uncut and ready to fit
              • Breakfast bars in the same decor
              • Free deliveryNext working day to most of the UK*
              • Full lengthsDelivered uncut, ready to fit
              • Pay your wayCard, Clearpay or Klarna
              Description

              A deep grey concrete with a rough stone texture. It grounds a white or pale wood kitchen and hides everyday marks well. Supplied as a 38mm postformed worktop with matching breakfast bars, upstand and splashback.

              Delivery

              Delivered by our specialist worktop delivery partner, in full lengths, flat and protected. Delivery is free to every postcode we serve. Order by 4pm Monday to Friday for next working day delivery to most of England and Wales; orders placed after 4pm, at weekends or on bank holidays are dispatched the next working day, and some areas take 2 to 3 working days. Check your date below. We confirm your slot 24 hours before, and delivery is kerbside, so have a second person ready to carry it in.
              Returns

              Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

              Care and cleaning

              The riven texture can hold crumbs in its low spots, so wipe in two directions with a damp cloth and a drop of washing-up liquid. A soft nylon brush lifts anything stubborn. Avoid scouring pads. Use a trivet for hot pans and a board for chopping.

              Which edge?

              • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
              • Square edge: a sharp, modern line with a matching edge strip.
              • Compact: 12mm solid board, slim and waterproof.
              More on edges and thickness

              Fitting in four steps

              • Measure, then cut face down with a fine-tooth blade.
              • Lay it on the units and screw up through the brackets.
              • Seal the cut edges, then fit the upstand and end caps.
              Read the full fitting guide

              How to measure

              • Measure each wall run along the back, in millimetres.
              • Add about 50mm to every run so you can trim to a clean fit.
              • In an L-shape, let the longest run go into the corner.
              Full measuring guide

              Size guide

              • Worktops come 3000mm or 4100mm long and 600mm deep.
              • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
              • Buy a length that covers your run, then cut it to fit.
              Full sizes and heights guide

              Why you’ll love it

              • Deep grey concrete with a textured finish

                Deep charcoal concrete with a riven Rough Stone texture that breaks up the surface.

              • Rough Stone finish

                Kronospan’s Rough Stone texture, a soft riven surface you can feel, made for stone decors. It resists stains and everyday scratches, and never needs sealing.

              • Everything matches

                Dark Grey Concrete comes as 38mm postformed worktops, 665mm and 900mm breakfast bars, plus a matching upstand (4100 x 100 x 22mm), a matching splashback (4100 x 640 x 10mm), so the whole kitchen is one decor.

              Dark Grey Concrete surface detail surface detail

              A darker concrete for contrast

              Dark grey concrete gives a strong contrast against white or pale oak cabinets, and its texture hides crumbs and fingerprints far better than a plain dark colour.

              Compare all stone effect worktops

              See it in a kitchen

              Three kitchen styles with Dark Grey Concrete.

              Dark Grey Concrete worktop in a white shaker kitchen
              Dark Grey Concrete along the main run
              Dark Grey Concrete worktop on an island with a breakfast bar
              Dark Grey Concrete as a breakfast bar
              Dark Grey Concrete worktop with sage green cabinets
              Dark Grey Concrete with the matching upstand

              How to fit

              Fitting Dark Grey Concrete

              Most straight runs of Dark Grey Concrete are a weekend job. Seal the cut edges well: the dark decor makes any swelling at a joint stand out.

              What you’ll need

              Most homes have these already:

              • Pencil
              • Drill driver
              • Circular saw or jigsaw
              • Straight edge or spirit level

              Tap to add the brands fitters use to your order:

              Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

              Sizes and prices

              Prices include VAT and free delivery. Dark Grey Concrete is supplied in full 3m and 4.1m lengths, uncut.

              ProductSize (L x D x T)Price
              Worktop 3m · 38mm postformed 3000 × 600 × 38mm £118.27
              Worktop 4.1m · 38mm postformed 4100 × 600 × 38mm £160.56
              Breakfast bar 665mm · 38mm postformed 4100 × 665 × 38mm £275.88
              Breakfast bar 900mm · 38mm postformed 4100 × 900 × 38mm £274.13
              Worktop 3.05m · 38mm square edge, 3m contract 3050 × 620 × 38mm £128.78
              Breakfast bar 900mm · 38mm square edge, 3m contract 3050 × 900 × 38mm £218.09
              Matching upstand · 4.1m 4100 × 100 × 22mm £86.80
              Matching upstand · 3m 3000 × 100 × 22mm £65.97
              Matching splashback · 4.1m 4100 × 640 × 10mm £258.30
              Edging strip · 45mm laminate edging 1300mm length £2.52
              Edging strip · 43mm ABS edging Per metre £5.77
              Joining strips · Straight 38mm Aluminium, 38mm × 640mm £9.99
              Joining strips · Corner 38mm Aluminium, 38mm × 640mm £11.99
              End caps · Left 38mm Aluminium, 38mm × 640mm £7.99
              End caps · Right 38mm Aluminium, 38mm × 640mm £7.99
              Fitting kit · Joint kit 3 connector bolts + sealant £12.99

              Specification

              BrandKronospan Finesse
              Decor codeK201 RS
              FinishRough Stone (RS)
              Edge38mm postformed
              Lengths3000mm, 4100mm
              CoreChipboard core under a high-pressure laminate surface
              WarrantyManufacturer’s warranty

              Questions about Dark Grey Concrete

              Can’t find your answer? Contact our worktop team.

              0330 000 0000Email us
              What sizes does Dark Grey Concrete come in?

              Prices include VAT and free delivery: Worktop 3m (38mm postformed) £118.27; Worktop 4.1m (38mm postformed) £160.56; Breakfast bar 900mm (38mm postformed) £274.13; Breakfast bar 665mm (38mm postformed) £275.88.

              Is Dark Grey Concrete rounded or square edge?

              Rounded. It is a postformed worktop, so the laminate wraps the front edge with a soft rounded profile and there is no seam at the front where water can get in. There is no square edge version of this decor.

              How do I join two lengths of Dark Grey Concrete at a corner?

              A postformed front edge needs either a mason’s mitre, cut with a worktop jig and router, or an aluminium corner joining strip, which only needs a straight cut. Seal a mitre with colour-matched joint sealant and pull it tight with connector bolts.

              Can I have an undermount sink with Dark Grey Concrete?

              No. Laminate worktops have a chipboard core that would be exposed around an undermount cut-out. Choose an inset sink, which sits on top and covers the cut edge. Dark Grey Concrete is not made in a 12mm compact version.

              What colour cabinets go with Dark Grey Concrete?

              Strong contrast with white, pale oak and light grey cabinets. Stainless or black taps both work.

              Is there a matching upstand and splashback?

              Yes: a matching upstand (4100 x 100 x 22mm), a matching splashback (4100 x 640 x 10mm). Full-height panel behind the hob or sink.

              How do I clean Dark Grey Concrete?

              The riven texture can hold crumbs in its low spots, so wipe in two directions with a damp cloth and a drop of washing-up liquid. A soft nylon brush lifts anything stubborn. Avoid scouring pads.

              How heavy is a Dark Grey Concrete worktop?

              The worktop 4.1m (4100 x 600 x 38mm) weighs roughly 60kg, so it is a two-person lift. It arrives as one full length, so check there is a clear route through the door and around corners.

              Can I see Dark Grey Concrete before I order?

              We don’t sell samples, but the decor code is K201 RS from Kronospan Finesse, so a kitchen showroom that stocks Kronospan can show you the real thing. The close-up photos on this page are true to colour on most screens.

              More stone & concrete looks

              View all

              Kitchen Ideas, New Colours & The Odd Offer

              One email a month, written by people who know worktops. Unsubscribe whenever you like.

              By signing up you agree to receive marketing emails. Read our privacy policy.

              Your basket (0)

              Your basket is empty.

              Shop worktops

              Your delivery postcode

              We’ll use it to show your delivery dates across the site.