0330 000 0000 Email our team

Order by 4pm for next working day delivery*

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.
Show prices Inc. VAT
0
Show prices
Call 0330 000 0000
0
  • Carrara Marble Compact Worktop, Carrara Marble colour swatch
DuropalShowing: 12mm compact

Duropal · S63009 CM· CM

Carrara Marble Compact Worktop

Classic white Carrara in a 12mm compact laminate that is solid and waterproof all the way through. It takes an undermount sink with a polished cut-out, and its slim edge looks like stone. Matching 12mm upstand and splashback available.

Colour: Carrara MarbleAll Compact Worktops
  • Carrara Marble Compact Worktop colour swatch

Each colour has its own page. Tap a swatch to switch.

Thickness and edge
Size

What's an upstand?

Upstand, 100mm highWorktop 100mm high 22mm thick Silicone bead 600mm deep worktop Wall

What it is

A 100mm-high strip in Carrara Marble, the same decor as your worktop. It sits along the back edge of the worktop, against the wall.

Why you need one

Walls are rarely straight, so there's nearly always a gap between worktop and wall. An upstand covers it, stops water and crumbs getting down the back, and gives a neat finished line. It's the simplest, cheapest way to finish a worktop.

Sizes

    Most kitchens need one length per wall run.

    Fitting

    Cut it to length with a fine-tooth saw and bond it to the wall with grab adhesive. Run a bead of clear or matching silicone along the bottom edge, and finish any exposed ends with an end cap.

    Upstand or splashback?

    Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

    Read the full fitting guide

    What's a splashback?

    Splashbackupstand heightHob and oven 640mm high 10mm thick Worktop Wall

    What it is

    A full-height panel in Carrara Marble, the same decor as your worktop, fixed to the wall behind the hob or sink.

    Why choose one

    One continuous wipe-clean surface with no grout lines, so there's nothing to stain or scrub between tiles. It protects the wall from splashes and cooking grease, and makes the worktop and wall look like one piece.

    Sizes

      Behind a hob

      Check the minimum clearance to a laminate panel in your hob's installation manual. Gas hobs usually need more space, or a heat-resistant panel behind the burners.

      Fitting

      Cut it to size and bond it to a flat, sound wall with panel adhesive. Seal the bottom edge to the worktop with silicone.

      Upstand or splashback?

      Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

      Read the full fitting guide

      What's an edging strip?

      BeforeCut end: barechipboard core AfterEdging strip,45mm wide, coversa cut end

      What it is

      A strip in Carrara Marble that covers the cut end of the worktop. It comes pre-glued, or is fixed with contact adhesive.

      When you need it

      Whenever a cut end is on show: at the end of a run, on a breakfast bar, or anywhere you've cut a length down.

      Sizes

        Fitting

        1. Glue Spread contact adhesive on the end and the strip, or warm a pre-glued strip.
        2. Press Press it on firmly from the middle outwards, with a block of wood.
        3. Trim and file Trim the overhang with a sharp blade, then file the edges down at a slight angle.
        Read the full fitting guide

        What are joining strips?

        Corner strip (L-shape)Straight stripSeen from above Aluminium strip38mm worktop: use the38mm stripWorktopWorktop

        What it is

        An aluminium strip that joins two worktop lengths without a router or jig. The web slips between the two ends and the cap covers the joint.

        Straight or corner

        Straight: joins two lengths in a line. Corner: makes an L-shaped join where two runs meet.

        Sizes

          Match the strip to your worktop's thickness: a 38mm strip for a 38mm worktop.

          The alternative

          A mason's mitre gives a seamless corner, but it needs a worktop jig and a router. See both options in our fitting guide.

          Read the full fitting guide

          What are end caps?

          BeforeAfterExposed endEnd capScrewed over therounded profile Left end capRight end capYou, facing the worktopWall

          What it is

          An aluminium cap that finishes the exposed end of a postformed worktop, following its rounded front edge.

          Left or right?

          Stand facing the worktop. If the exposed end is on your left, you need a left end cap; if it's on your right, a right end cap.

          Sizes

            Match the cap to your worktop's thickness.

            Fitting

            Hold the cap against the end, drill small pilot holes and screw it on. A thin bead of silicone behind it keeps water out of the end.

            Read the full fitting guide

            What's in the joint kit?

            3 connector boltsJoint sealant Seen from underneathBolts pull the joint tight;sealant keeps water out

            What's in it

            Three connector bolts and a tube of joint sealant: everything to hold one worktop joint together.

            What it's for

            The bolts sit in pockets cut underneath both worktops and pull the joint tight. The sealant goes on the joint faces first, so water can't get into the core.

            How many?

            One kit per worktop joint.

              Read the full fitting guide
              Total inc VAT £1,055.17

              Free delivery on this order

              4 interest-free payments of £263.79
              or 3 interest-free payments of £351.72

              18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

              Order by 4pm for next working day delivery*

              • 12mm solid compact laminate, waterproof through the core
              • Suits undermount sinks and polished cut-outs
              • Matching 12mm upstand and full-height splashback
              • 4.1m worktops, 950mm breakfast bars and full sheets
              • Free deliveryNext working day to most of the UK*
              • Full lengthsDelivered uncut, ready to fit
              • Pay your wayCard, Clearpay or Klarna
              Description

              Classic white Carrara in a 12mm compact laminate that is solid and waterproof all the way through. It takes an undermount sink with a polished cut-out, and its slim edge looks like stone. Matching 12mm upstand and splashback available.

              Delivery

              Delivered by our specialist worktop delivery partner, in full lengths, flat and protected. Delivery is free to every postcode we serve. Order by 4pm Monday to Friday for next working day delivery to most of England and Wales; orders placed after 4pm, at weekends or on bank holidays are dispatched the next working day, and some areas take 2 to 3 working days. Check your date below. We confirm your slot 24 hours before, and delivery is kerbside, so have a second person ready to carry it in.
              Returns

              Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

              Care and cleaning

              Wipe with warm soapy water and a soft cloth. Use a chopping board and a trivet. Polish cut-out edges with fine abrasive pads if they dull over time.

              Which edge?

              • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
              • Square edge: a sharp, modern line with a matching edge strip.
              • Compact: 12mm solid board, slim and waterproof.
              More on edges and thickness

              Fitting in four steps

              • Measure, then cut face down with a fine-tooth blade.
              • Lay it on the units and screw up through the brackets.
              • Seal the cut edges, then fit the upstand and end caps.
              Read the full fitting guide

              How to measure

              • Measure each wall run along the back, in millimetres.
              • Add about 50mm to every run so you can trim to a clean fit.
              • In an L-shape, let the longest run go into the corner.
              Full measuring guide

              Size guide

              • Worktops come 3000mm or 4100mm long and 600mm deep.
              • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
              • Buy a length that covers your run, then cut it to fit.
              Full sizes and heights guide

              Why you’ll love it

              • Classic white Carrara, solid all the way through

                Printed from real Carrara with a broad repeat, so joined lengths don’t look patterned.

              • Waterproof all the way through

                No chipboard core to swell. Compact laminate is solid, so it shrugs off water around the sink and takes an undermount bowl.

              • Everything matches

                Order the worktop, breakfast bar, upstand and splashback in the same decor, so the whole run looks like one piece.

              Carrara Marble Compact surface detail surface detail

              Compact: the slim top that takes an undermount sink

              Compact laminate is pressed under heat until it is solid all the way through. That makes it waterproof, strong enough to span with a slim 12mm edge, and suitable for a polished undermount sink cut-out that a standard chipboard worktop can’t take.

              Compare all compact worktops

              See it in a kitchen

              Three kitchen styles with Carrara Marble.

              Carrara Marble compact worktop surface
              In a white shaker kitchen
              Carrara Marble Compact worktop in a white shaker kitchen
              On an island with a breakfast bar
              Carrara Marble Compact worktop on an island with a breakfast bar
              With sage green cabinets
              Carrara Marble Compact worktop with sage green cabinets

              How to fit

              Fitting Carrara Marble

              Four simple steps and a few everyday tools. A straight run is a typical weekend DIY job.

              What you’ll need

              Most homes have these already:

              • Pencil
              • Drill driver
              • Circular saw or jigsaw
              • Straight edge or spirit level

              Tap to add the brands fitters use to your order:

              Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

              Sizes and prices

              Prices include VAT and free delivery. Carrara Marble is supplied in full 3m and 4.1m lengths, uncut.

              ProductSize (L x D x T)Price
              Worktop 4.1m · 12mm compact 4100 × 640 × 12mm £1,055.17
              Full sheet · 12mm compact 4100 × 1300 × 12mm £1,804.86
              Breakfast bar 950mm · 12mm compact 4100 × 950 × 12mm £1,944.24
              Matching upstand · 4.1m 4100 × 120 × 12mm £197.86
              Matching splashback · 4.1m 4100 × 640 × 9.2mm £421.57
              Fitting kit · Compact joint kit £53.81

              Specification

              BrandDuropal
              Decor codeS63009
              FinishCM
              Construction12mm solid compact laminate
              CoreSolid compact core, waterproof all the way through
              Depth640mm, breakfast bar 950mm
              Lengths4100mm
              Undermount sinkYes
              WarrantyManufacturer’s warranty

              Questions about Carrara Marble

              Can’t find your answer? Contact our worktop team.

              0330 000 0000Email us
              Can I have an undermount sink?

              Yes. Compact is solid all the way through, so the cut-out can be polished and left exposed.

              How is compact fitted?

              It is glued to the units and jointed with adhesive rather than screwed. Use the compact fitting kit and Topseal adhesive.

              Can I cut it myself?

              Use carbide-tipped blades and a router for the final pass. Most customers use a fitter for compact.

              Is delivery free?

              Yes. You’ll see your delivery date after adding to basket.

              More compact looks

              View all

              Kitchen Ideas, New Colours & The Odd Offer

              One email a month, written by people who know worktops. Unsubscribe whenever you like.

              By signing up you agree to receive marketing emails. Read our privacy policy.

              Your basket (0)

              Your basket is empty.

              Shop worktops

              Your delivery postcode

              We’ll use it to show your delivery dates across the site.