0330 000 0000 Email our team

Order by 4pm for next working day delivery*

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.
Show prices Inc. VAT
0
Show prices
Call 0330 000 0000
0
  • Calacatta Olympus colour swatch
Kronospan FinesseShowing: 38mm square edge

Kronospan Finesse · K551 SU· Super Matt

Calacatta Olympus Laminate Worktop

A bright white marble with soft grey and warm gold veining, finished in Kronospan’s super-matt texture so it looks like honed stone rather than shiny laminate. Square edge in 38mm or slim 22mm, with a matching upstand and a double-sided splashback.

Colour: Calacatta OlympusAll Marble Effect Laminate Worktops
  • Calacatta Olympus Laminate Worktop colour swatch
  • White Iceberg Marble Laminate Worktop colour swatch
  • Carrara Marble Laminate Worktop colour swatch
  • Nero Portoro Laminate Worktop colour swatch

Each colour has its own page. Tap a swatch to switch.

Thickness and edge
Size

What's an upstand?

Upstand, 100mm highWorktop 100mm high 22mm thick Silicone bead 600mm deep worktop Wall

What it is

A 100mm-high strip in Calacatta Olympus, the same decor as your worktop. It sits along the back edge of the worktop, against the wall.

Why you need one

Walls are rarely straight, so there's nearly always a gap between worktop and wall. An upstand covers it, stops water and crumbs getting down the back, and gives a neat finished line. It's the simplest, cheapest way to finish a worktop.

Sizes

    Most kitchens need one length per wall run.

    Fitting

    Cut it to length with a fine-tooth saw and bond it to the wall with grab adhesive. Run a bead of clear or matching silicone along the bottom edge, and finish any exposed ends with an end cap.

    Upstand or splashback?

    Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

    Read the full fitting guide

    What's a splashback?

    Splashbackupstand heightHob and oven 640mm high 10mm thick Worktop Wall

    What it is

    A full-height panel in Calacatta Olympus, the same decor as your worktop, fixed to the wall behind the hob or sink.

    Why choose one

    One continuous wipe-clean surface with no grout lines, so there's nothing to stain or scrub between tiles. It protects the wall from splashes and cooking grease, and makes the worktop and wall look like one piece.

    Sizes

      It's double-sided: White Iceberg Marble is on the reverse, so you can choose which way round to fit it.

      Behind a hob

      Check the minimum clearance to a laminate panel in your hob's installation manual. Gas hobs usually need more space, or a heat-resistant panel behind the burners.

      Fitting

      Cut it to size and bond it to a flat, sound wall with panel adhesive. Seal the bottom edge to the worktop with silicone.

      Upstand or splashback?

      Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

      Read the full fitting guide

      What's an edging strip?

      BeforeCut end: barechipboard core AfterEdging strip,45mm wide, coversa cut end

      What it is

      A strip in Calacatta Olympus that covers the cut end of the worktop. It comes pre-glued, or is fixed with contact adhesive.

      When you need it

      Whenever a cut end is on show: at the end of a run, on a breakfast bar, or anywhere you've cut a length down.

      Sizes

        Fitting

        1. Glue Spread contact adhesive on the end and the strip, or warm a pre-glued strip.
        2. Press Press it on firmly from the middle outwards, with a block of wood.
        3. Trim and file Trim the overhang with a sharp blade, then file the edges down at a slight angle.
        Read the full fitting guide

        What are joining strips?

        Corner strip (L-shape)Straight stripSeen from above Aluminium strip38mm worktop: use the38mm stripWorktopWorktop

        What it is

        An aluminium strip that joins two worktop lengths without a router or jig. The web slips between the two ends and the cap covers the joint.

        Straight or corner

        Straight: joins two lengths in a line. Corner: makes an L-shaped join where two runs meet.

        Sizes

          Match the strip to your worktop's thickness: a 38mm strip for a 38mm worktop.

          The alternative

          A mason's mitre gives a seamless corner, but it needs a worktop jig and a router. See both options in our fitting guide.

          Read the full fitting guide

          What are end caps?

          BeforeAfterExposed endEnd capScrewed over therounded profile Left end capRight end capYou, facing the worktopWall

          What it is

          An aluminium cap that finishes the exposed end of a postformed worktop, following its rounded front edge.

          Left or right?

          Stand facing the worktop. If the exposed end is on your left, you need a left end cap; if it's on your right, a right end cap.

          Sizes

            Match the cap to your worktop's thickness.

            Fitting

            Hold the cap against the end, drill small pilot holes and screw it on. A thin bead of silicone behind it keeps water out of the end.

            Read the full fitting guide

            What's in the joint kit?

            3 connector boltsJoint sealant Seen from underneathBolts pull the joint tight;sealant keeps water out

            What's in it

            Three connector bolts and a tube of joint sealant: everything to hold one worktop joint together.

            What it's for

            The bolts sit in pockets cut underneath both worktops and pull the joint tight. The sealant goes on the joint faces first, so water can't get into the core.

            How many?

            One kit per worktop joint.

              Read the full fitting guide
              Total inc VAT £168.73

              Free delivery on this order

              4 interest-free payments of £42.18
              or 3 interest-free payments of £56.24

              18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

              Order by 4pm for next working day delivery*

              • Square edge with colour-matched edging, in 38mm or 22mm
              • Super-matt finish that hides fingerprints and smears
              • Matching 100mm upstand and full-height splashback
              • Full 3m and 4.1m lengths, plus 665mm and 900mm breakfast bars
              • Free deliveryNext working day to most of the UK*
              • Full lengthsDelivered uncut, ready to fit
              • Pay your wayCard, Clearpay or Klarna
              Description

              A bright white marble with soft grey and warm gold veining, finished in Kronospan’s super-matt texture so it looks like honed stone rather than shiny laminate. Square edge in 38mm or slim 22mm, with a matching upstand and a double-sided splashback.

              Delivery

              Delivered by our specialist worktop delivery partner, in full lengths, flat and protected. Delivery is free to every postcode we serve. Order by 4pm Monday to Friday for next working day delivery to most of England and Wales; orders placed after 4pm, at weekends or on bank holidays are dispatched the next working day, and some areas take 2 to 3 working days. Check your date below. We confirm your slot 24 hours before, and delivery is kerbside, so have a second person ready to carry it in.
              Returns

              Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

              Care and cleaning

              Super-matt surfaces hide fingerprints well. Wipe with a damp microfibre cloth and dry it off; a little washing-up liquid shifts grease. Avoid cream cleaners and scourers, which can polish small shiny patches into a matt finish. Use a trivet for hot pans and a board for chopping.

              Which edge?

              • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
              • Square edge: a sharp, modern line with a matching edge strip.
              • Compact: 12mm solid board, slim and waterproof.
              More on edges and thickness

              Fitting in four steps

              • Measure, then cut face down with a fine-tooth blade.
              • Lay it on the units and screw up through the brackets.
              • Seal the cut edges, then fit the upstand and end caps.
              Read the full fitting guide

              How to measure

              • Measure each wall run along the back, in millimetres.
              • Add about 50mm to every run so you can trim to a clean fit.
              • In an L-shape, let the longest run go into the corner.
              Full measuring guide

              Size guide

              • Worktops come 3000mm or 4100mm long and 600mm deep.
              • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
              • Buy a length that covers your run, then cut it to fit.
              Full sizes and heights guide

              See the whole board

              The full 4100 × 600mm board, so you can see how the pattern runs from end to end.

              Full 4100mm board of Calacatta Olympus Laminate Worktop, showing how the veining runs along the length

              Swipe to see the full length

              Calacatta Olympus Laminate Worktop: full board

              Full 4100mm board of Calacatta Olympus Laminate Worktop, showing how the veining runs along the length

              Why you’ll love it

              • White marble with soft grey and gold veining

                Bold grey and warm gold veins on a bright white ground, printed across the full 4.1m without an obvious repeat.

              • Super Matt finish

                Kronospan’s Super Matt texture: smooth to the touch, with a low sheen that reads like honed stone. It resists stains and everyday scratches, and never needs sealing.

              • Everything matches

                Calacatta Olympus comes as 38mm square edge and 22mm square edge worktops, 665mm and 900mm breakfast bars, plus a matching upstand (4100 x 100 x 20mm), a matching splashback (4100 x 640 x 10mm), so the whole kitchen is one decor.

              Calacatta Olympus surface detail surface detail

              The look of Calacatta, without the upkeep

              Real Calacatta marble stains, etches and needs sealing. This laminate gives you the same bright white and soft veining on a surface you can wipe clean with warm soapy water. The super-matt finish keeps it looking like honed stone, and each length has a broad, varied vein pattern, so two joined lengths never look like an obvious repeat.

              Compare all marble effect worktops

              See it in a kitchen

              Three kitchen styles with Calacatta Olympus.

              Calacatta Olympus worktop in a white shaker kitchen
              Calacatta Olympus along the main run
              Calacatta Olympus worktop on an island with a breakfast bar
              Calacatta Olympus as a breakfast bar
              Calacatta Olympus worktop with sage green cabinets
              Calacatta Olympus with the matching upstand

              How to fit

              Fitting Calacatta Olympus

              Most straight runs of Calacatta Olympus are a weekend job. Lay the lengths out before cutting and choose which end goes into the corner: the veining is directional, and matching the flow across a joint makes it far less visible.

              What you’ll need

              Most homes have these already:

              • Pencil
              • Drill driver
              • Circular saw or jigsaw
              • Straight edge or spirit level

              Tap to add the brands fitters use to your order:

              Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

              Sizes and prices

              Prices include VAT and free delivery. Calacatta Olympus is supplied in full 3m and 4.1m lengths, uncut.

              ProductSize (L x D x T)Price
              Worktop 3m · 38mm square edge 3000 × 600 × 38mm £168.73
              Worktop 4.1m · 38mm square edge 4100 × 600 × 38mm £229.08
              Breakfast bar 665mm · 38mm square edge 4100 × 665 × 38mm £368.92
              Breakfast bar 900mm · 38mm square edge 4100 × 900 × 38mm £366.53
              Worktop 4.1m · 22mm square edge 4100 × 620 × 22mm £193.12
              Breakfast bar 900mm · 22mm square edge 4100 × 900 × 22mm £280.34
              Matching upstand · 4.1m 4100 × 100 × 20mm £86.80
              Matching upstand · 3m 3000 × 100 × 20mm £65.97
              Matching splashback · 4.1m 4100 × 640 × 10mm £258.30
              Edging strip · 43mm ABS edging 1300 × 43 × 1.5mm £5.49
              Edging strip · 28mm ABS edging 1300 × 28 × 1.5mm £5.49
              Joining strips · Straight 38mm Aluminium, 38mm × 640mm £9.99
              Joining strips · Corner 38mm Aluminium, 38mm × 640mm £11.99
              Joining strips · Straight 22mm Aluminium, 22mm × 640mm £9.99
              Joining strips · Corner 22mm Aluminium, 22mm × 640mm £11.99
              End caps · Left 38mm Aluminium, 38mm × 640mm £7.99
              End caps · Right 38mm Aluminium, 38mm × 640mm £7.99
              End caps · Left 22mm Aluminium, 22mm × 640mm £7.99
              End caps · Right 22mm Aluminium, 22mm × 640mm £7.99
              Fitting kit · Joint kit 3 connector bolts + sealant £12.99

              Specification

              BrandKronospan Finesse
              Decor codeK551
              FinishSuper Matt (SU)
              EdgeSquare, colour-matched ABS edging
              Thickness38mm or 22mm
              Depth600mm (38mm), 620mm (22mm), breakfast bars 665mm and 900mm
              Lengths3000mm and 4100mm
              CoreChipboard core under a high-pressure laminate surface
              Matching splashbackCategory 2, double-sided with K552 White Iceberg Marble
              Compact version12mm compact laminate also available
              WarrantyManufacturer’s warranty

              Questions about Calacatta Olympus

              Can’t find your answer? Contact our worktop team.

              0330 000 0000Email us
              What sizes does Calacatta Olympus come in?

              Prices include VAT and free delivery: Worktop 3m (38mm square edge) £168.73; Worktop 4.1m (38mm square edge) £229.08; Breakfast bar 665mm (38mm square edge) £368.92; Breakfast bar 900mm (38mm square edge) £366.53; Worktop 4.1m (22mm square edge) £193.12; Breakfast bar 900mm (22mm square edge) £280.34.

              Is Calacatta Olympus square or rounded edge?

              Square edge only, in 38mm and 22mm. Finish any cut end with the matching edging strip so the core is sealed and the decor carries round the end.

              How do I join two lengths of Calacatta Olympus at a corner?

              Square edge worktops can be butt-jointed: one length runs into the corner and the other meets it square. Hold the joint with connector bolts underneath and seal it with colour-matched joint sealant. A mitre with a worktop jig also works for 38mm.

              Can I have an undermount sink with Calacatta Olympus?

              Not with the laminate version. Calacatta Olympus is also made as a 12mm compact worktop, which is solid all the way through, so the sink cut-out can be polished and the sink fixed underneath. Ask us for compact sizes and prices.

              What colour cabinets go with Calacatta Olympus?

              Deep green, navy and inky blue cabinets make the gold veining glow. With white or pale grey units, pick brass or warm-toned handles to pick out the gold.

              Is there a matching upstand and splashback?

              Yes: a matching upstand (4100 x 100 x 20mm), a matching splashback (4100 x 640 x 10mm). Double-sided: White Iceberg Marble on the reverse.

              How do I clean Calacatta Olympus?

              Super-matt surfaces hide fingerprints well. Wipe with a damp microfibre cloth and dry it off; a little washing-up liquid shifts grease. Avoid cream cleaners and scourers, which can polish small shiny patches into a matt finish.

              How heavy is a Calacatta Olympus worktop?

              The worktop 4.1m (4100 x 600 x 38mm) weighs roughly 60kg, so it is a two-person lift. It arrives as one full length, so check there is a clear route through the door and around corners.

              Can I see Calacatta Olympus before I order?

              We don’t sell samples, but the decor code is K551 SU from Kronospan Finesse, so a kitchen showroom that stocks Kronospan can show you the real thing. The close-up photos on this page are true to colour on most screens.

              More marble effect looks

              View all

              Kitchen Ideas, New Colours & The Odd Offer

              One email a month, written by people who know worktops. Unsubscribe whenever you like.

              By signing up you agree to receive marketing emails. Read our privacy policy.

              Your basket (0)

              Your basket is empty.

              Shop worktops

              Your delivery postcode

              We’ll use it to show your delivery dates across the site.