0330 000 0000 Email our team

Order by 4pm for next working day delivery*

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.
Show prices Inc. VAT
0
Show prices
Call 0330 000 0000
0
  • Breccia Vivaldo Compact Worktop, Breccia Vivaldo colour swatch
Kronospan Slimline PlusShowing: 12mm compact

Kronospan Slimline Plus · K594 SU· Super Matt

Breccia Vivaldo Compact Worktop

A cream marble look with caramel veins and small violet-grey flecks, laid out like fragments of stone cemented together, in Super Matt. Breccia Vivaldo is a 12mm compact worktop, solid right through, with a slim edge and a 100mm upstand.

Thickness and edge
Size

What's an upstand?

Upstand, 100mm highWorktop 100mm high 22mm thick Silicone bead 600mm deep worktop Wall

What it is

A 100mm-high strip in Breccia Vivaldo, the same decor as your worktop. It sits along the back edge of the worktop, against the wall.

Why you need one

Walls are rarely straight, so there's nearly always a gap between worktop and wall. An upstand covers it, stops water and crumbs getting down the back, and gives a neat finished line. It's the simplest, cheapest way to finish a worktop.

Sizes

    Most kitchens need one length per wall run.

    Fitting

    Cut it to length with a fine-tooth saw and bond it to the wall with grab adhesive. Run a bead of clear or matching silicone along the bottom edge, and finish any exposed ends with an end cap.

    Upstand or splashback?

    Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

    Read the full fitting guide

    What's a splashback?

    Splashbackupstand heightHob and oven 640mm high 10mm thick Worktop Wall

    What it is

    A full-height panel in Breccia Vivaldo, the same decor as your worktop, fixed to the wall behind the hob or sink.

    Why choose one

    One continuous wipe-clean surface with no grout lines, so there's nothing to stain or scrub between tiles. It protects the wall from splashes and cooking grease, and makes the worktop and wall look like one piece.

    Sizes

      Behind a hob

      Check the minimum clearance to a laminate panel in your hob's installation manual. Gas hobs usually need more space, or a heat-resistant panel behind the burners.

      Fitting

      Cut it to size and bond it to a flat, sound wall with panel adhesive. Seal the bottom edge to the worktop with silicone.

      Upstand or splashback?

      Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

      Read the full fitting guide

      What's an edging strip?

      BeforeCut end: barechipboard core AfterEdging strip,45mm wide, coversa cut end

      What it is

      A strip in Breccia Vivaldo that covers the cut end of the worktop. It comes pre-glued, or is fixed with contact adhesive.

      When you need it

      Whenever a cut end is on show: at the end of a run, on a breakfast bar, or anywhere you've cut a length down.

      Sizes

        Fitting

        1. Glue Spread contact adhesive on the end and the strip, or warm a pre-glued strip.
        2. Press Press it on firmly from the middle outwards, with a block of wood.
        3. Trim and file Trim the overhang with a sharp blade, then file the edges down at a slight angle.
        Read the full fitting guide

        What are joining strips?

        Corner strip (L-shape)Straight stripSeen from above Aluminium strip38mm worktop: use the38mm stripWorktopWorktop

        What it is

        An aluminium strip that joins two worktop lengths without a router or jig. The web slips between the two ends and the cap covers the joint.

        Straight or corner

        Straight: joins two lengths in a line. Corner: makes an L-shaped join where two runs meet.

        Sizes

          Match the strip to your worktop's thickness: a 38mm strip for a 38mm worktop.

          The alternative

          A mason's mitre gives a seamless corner, but it needs a worktop jig and a router. See both options in our fitting guide.

          Read the full fitting guide

          What are end caps?

          BeforeAfterExposed endEnd capScrewed over therounded profile Left end capRight end capYou, facing the worktopWall

          What it is

          An aluminium cap that finishes the exposed end of a postformed worktop, following its rounded front edge.

          Left or right?

          Stand facing the worktop. If the exposed end is on your left, you need a left end cap; if it's on your right, a right end cap.

          Sizes

            Match the cap to your worktop's thickness.

            Fitting

            Hold the cap against the end, drill small pilot holes and screw it on. A thin bead of silicone behind it keeps water out of the end.

            Read the full fitting guide

            What's in the joint kit?

            3 connector boltsJoint sealant Seen from underneathBolts pull the joint tight;sealant keeps water out

            What's in it

            Three connector bolts and a tube of joint sealant: everything to hold one worktop joint together.

            What it's for

            The bolts sit in pockets cut underneath both worktops and pull the joint tight. The sealant goes on the joint faces first, so water can't get into the core.

            How many?

            One kit per worktop joint.

              Read the full fitting guide
              Total inc VAT £695.84

              Free delivery on this order

              4 interest-free payments of £173.96
              or 3 interest-free payments of £231.94

              18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

              Order by 4pm for next working day delivery*

              • 12mm solid compact, cream and caramel, slim edge
              • cream and caramel, decor K594, code SU
              • 100mm upstand to match cream and caramel
              • 650mm top, 950mm bar, sheet in cream and caramel
              • Free deliveryNext working day to most of the UK*
              • Full lengthsDelivered uncut, ready to fit
              • Pay your wayCard, Clearpay or Klarna
              Description

              A cream marble look with caramel veins and small violet-grey flecks, laid out like fragments of stone cemented together, in Super Matt. Breccia Vivaldo is a 12mm compact worktop, solid right through, with a slim edge and a 100mm upstand.

              Delivery

              Delivered by our specialist worktop delivery partner, in full lengths, flat and protected. Delivery is free to every postcode we serve. Order by 4pm Monday to Friday for next working day delivery to most of England and Wales; orders placed after 4pm, at weekends or on bank holidays are dispatched the next working day, and some areas take 2 to 3 working days. Check your date below. We confirm your slot 24 hours before, and delivery is kerbside, so have a second person ready to carry it in.
              Returns

              Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

              Care and cleaning

              Breccia Vivaldo shrugs off daily wiping with a soft cloth and warm soapy water. Dry afterwards to leave the cream clean, and use a trivet and a chopping board to protect the face.

              Which edge?

              • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
              • Square edge: a sharp, modern line with a matching edge strip.
              • Compact: 12mm solid board, slim and waterproof.
              More on edges and thickness

              Fitting in four steps

              • Measure, then cut face down with a fine-tooth blade.
              • Lay it on the units and screw up through the brackets.
              • Seal the cut edges, then fit the upstand and end caps.
              Read the full fitting guide

              How to measure

              • Measure each wall run along the back, in millimetres.
              • Add about 50mm to every run so you can trim to a clean fit.
              • In an L-shape, let the longest run go into the corner.
              Full measuring guide

              Size guide

              • Worktops come 3000mm or 4100mm long and 600mm deep.
              • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
              • Buy a length that covers your run, then cut it to fit.
              Full sizes and heights guide

              Why you’ll love it

              • Cream breccia with caramel veins

                Caramel and tan veins wander through a cream ground, broken by pale clouds and the odd violet-grey fleck. It is warm and busy, like a classic breccia marble.

              • Dense compact below Super Matt

                Super Matt is the maker finish name here. The board under it is solid compact, so splashes near the sink are harmless and an undermount bowl is possible.

              • One thickness, 12mm only

                There is no laminate version of Breccia Vivaldo in this range. The 12mm compact is the single choice, with a 100mm upstand for the wall edge.

              A rich cream marble for traditional kitchens

              Breccia Vivaldo suits kitchens with character: painted shaker doors, glass-fronted cabinets, brass handles and plaster walls. The mix of caramel, cream and violet-grey gives it real depth, so one length can anchor a whole room, island or run. Its busy pattern also hides daily marks well, which suits family kitchens, and the slim edge keeps it light and modern in feel.

              Explore marble effect worktops

              How to fit

              Fitting Breccia Vivaldo

              Breccia Vivaldo has a busy, fragmented pattern, so lengths join without much matching. The 12mm board is bonded rather than screwed, so dry-fit each piece and keep adhesive off the cream face.

              What you’ll need

              Most homes have these already:

              • Pencil
              • Drill driver
              • Circular saw or jigsaw
              • Straight edge or spirit level

              Tap to add the brands fitters use to your order:

              Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

              Sizes and prices

              Prices include VAT and free delivery. Breccia Vivaldo is supplied in full 3m and 4.1m lengths, uncut.

              ProductSize (L x D x T)Price
              Worktop 4.1m · 12mm compact 4100 × 650 × 12mm £695.84
              Full sheet · 12mm compact 4100 × 1300 × 12mm £1,391.64
              Breakfast bar 950mm · 12mm compact 4100 × 950 × 12mm £1,460.90
              Matching upstand · 4.1m 4100 × 100 × 12mm £116.81
              Fitting kit · Compact joint kit £53.81

              Specification

              BrandKronospan Slimline Plus
              Decor codeK594
              FinishSuper Matt (SU)
              EdgeCompact, solid monochrome core
              Thickness12mm
              Depth650mm; breakfast bars 950mm
              Lengths4100mm
              CoreSolid compact laminate, the same material all the way through
              Matching upstand4100 x 100 x 12mm
              WarrantyManufacturer’s warranty

              Questions about Breccia Vivaldo

              Can’t find your answer? Contact our worktop team.

              0330 000 0000Email us
              Which Breccia Vivaldo sizes can I buy?

              Breccia Vivaldo is supplied 4100mm long and 12mm thick, in depths of 650mm for the worktop, 950mm for the bar and 1300mm for the sheet.

              Can I fit an undermount bowl?

              Yes. The solid compact board allows a polished cut-out left exposed. Inset sinks are also fine if you want a visible rim.

              Is it warm or cool in tone?

              Warm. Cream and caramel dominate the swatch, with violet-grey flecks providing a cooler accent, so it suits timber and brass better than chrome and steel.

              Which doors and hardware suit Breccia Vivaldo?

              Sage, ivory, putty and deep green doors all work. Brass, bronze or aged pewter handles pick up the caramel veins.

              Is there a laminate Breccia Vivaldo?

              No. It is made only as 12mm compact in this range, so there is no thicker postformed or square edge laminate version to compare it with.

              Does Breccia Vivaldo include an upstand?

              A 4100 x 100 x 12mm upstand is available in this decor for the wall edge. Matching splashbacks are not listed, so plan tiles or paint above.

              More marble effect looks

              View all

              Kitchen Ideas, New Colours & The Odd Offer

              One email a month, written by people who know worktops. Unsubscribe whenever you like.

              By signing up you agree to receive marketing emails. Read our privacy policy.

              Your basket (0)

              Your basket is empty.

              Shop worktops

              Your delivery postcode

              We’ll use it to show your delivery dates across the site.