0330 000 0000 Email our team

Order by 4pm for next working day delivery*

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.
Show prices Inc. VAT
0
Show prices
Call 0330 000 0000
0
  • Black Compact Worktop, Black colour swatch
Kronospan Slimline PlusShowing: 12mm compact

Kronospan Slimline Plus · 0190 AF· AF

Black Compact Worktop

A deep, plain black with a fine mottled grain, supplied as a 12mm compact worktop that is solid all the way through. This version is finish code AF, and its slim edge suits dark kitchens where depth matters. A 100mm upstand matches the top.

Thickness and edge
Size

What's an upstand?

Upstand, 100mm highWorktop 100mm high 22mm thick Silicone bead 600mm deep worktop Wall

What it is

A 100mm-high strip in Black, the same decor as your worktop. It sits along the back edge of the worktop, against the wall.

Why you need one

Walls are rarely straight, so there's nearly always a gap between worktop and wall. An upstand covers it, stops water and crumbs getting down the back, and gives a neat finished line. It's the simplest, cheapest way to finish a worktop.

Sizes

    Most kitchens need one length per wall run.

    Fitting

    Cut it to length with a fine-tooth saw and bond it to the wall with grab adhesive. Run a bead of clear or matching silicone along the bottom edge, and finish any exposed ends with an end cap.

    Upstand or splashback?

    Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

    Read the full fitting guide

    What's a splashback?

    Splashbackupstand heightHob and oven 640mm high 10mm thick Worktop Wall

    What it is

    A full-height panel in Black, the same decor as your worktop, fixed to the wall behind the hob or sink.

    Why choose one

    One continuous wipe-clean surface with no grout lines, so there's nothing to stain or scrub between tiles. It protects the wall from splashes and cooking grease, and makes the worktop and wall look like one piece.

    Sizes

      Behind a hob

      Check the minimum clearance to a laminate panel in your hob's installation manual. Gas hobs usually need more space, or a heat-resistant panel behind the burners.

      Fitting

      Cut it to size and bond it to a flat, sound wall with panel adhesive. Seal the bottom edge to the worktop with silicone.

      Upstand or splashback?

      Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

      Read the full fitting guide

      What's an edging strip?

      BeforeCut end: barechipboard core AfterEdging strip,45mm wide, coversa cut end

      What it is

      A strip in Black that covers the cut end of the worktop. It comes pre-glued, or is fixed with contact adhesive.

      When you need it

      Whenever a cut end is on show: at the end of a run, on a breakfast bar, or anywhere you've cut a length down.

      Sizes

        Fitting

        1. Glue Spread contact adhesive on the end and the strip, or warm a pre-glued strip.
        2. Press Press it on firmly from the middle outwards, with a block of wood.
        3. Trim and file Trim the overhang with a sharp blade, then file the edges down at a slight angle.
        Read the full fitting guide

        What are joining strips?

        Corner strip (L-shape)Straight stripSeen from above Aluminium strip38mm worktop: use the38mm stripWorktopWorktop

        What it is

        An aluminium strip that joins two worktop lengths without a router or jig. The web slips between the two ends and the cap covers the joint.

        Straight or corner

        Straight: joins two lengths in a line. Corner: makes an L-shaped join where two runs meet.

        Sizes

          Match the strip to your worktop's thickness: a 38mm strip for a 38mm worktop.

          The alternative

          A mason's mitre gives a seamless corner, but it needs a worktop jig and a router. See both options in our fitting guide.

          Read the full fitting guide

          What are end caps?

          BeforeAfterExposed endEnd capScrewed over therounded profile Left end capRight end capYou, facing the worktopWall

          What it is

          An aluminium cap that finishes the exposed end of a postformed worktop, following its rounded front edge.

          Left or right?

          Stand facing the worktop. If the exposed end is on your left, you need a left end cap; if it's on your right, a right end cap.

          Sizes

            Match the cap to your worktop's thickness.

            Fitting

            Hold the cap against the end, drill small pilot holes and screw it on. A thin bead of silicone behind it keeps water out of the end.

            Read the full fitting guide

            What's in the joint kit?

            3 connector boltsJoint sealant Seen from underneathBolts pull the joint tight;sealant keeps water out

            What's in it

            Three connector bolts and a tube of joint sealant: everything to hold one worktop joint together.

            What it's for

            The bolts sit in pockets cut underneath both worktops and pull the joint tight. The sealant goes on the joint faces first, so water can't get into the core.

            How many?

            One kit per worktop joint.

              Read the full fitting guide
              Total inc VAT £564.59

              Free delivery on this order

              4 interest-free payments of £141.14
              or 3 interest-free payments of £188.19

              18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

              Order by 4pm for next working day delivery*

              • 12mm solid compact, AF black, slim edge
              • AF black, decor 0190, code AF
              • 100mm upstand to match AF black
              • 650mm top, 950mm bar, sheet in AF black
              • Free deliveryNext working day to most of the UK*
              • Full lengthsDelivered uncut, ready to fit
              • Pay your wayCard, Clearpay or Klarna
              Description

              A deep, plain black with a fine mottled grain, supplied as a 12mm compact worktop that is solid all the way through. This version is finish code AF, and its slim edge suits dark kitchens where depth matters. A 100mm upstand matches the top.

              Delivery

              Delivered by our specialist worktop delivery partner, in full lengths, flat and protected. Delivery is free to every postcode we serve. Order by 4pm Monday to Friday for next working day delivery to most of England and Wales; orders placed after 4pm, at weekends or on bank holidays are dispatched the next working day, and some areas take 2 to 3 working days. Check your date below. We confirm your slot 24 hours before, and delivery is kerbside, so have a second person ready to carry it in.
              Returns

              Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

              Care and cleaning

              AF black cleans with a soft cloth and warm soapy water, then a dry buff to stop streaks showing. A trivet keeps hot pans off the face, and a board keeps knives away.

              Which edge?

              • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
              • Square edge: a sharp, modern line with a matching edge strip.
              • Compact: 12mm solid board, slim and waterproof.
              More on edges and thickness

              Fitting in four steps

              • Measure, then cut face down with a fine-tooth blade.
              • Lay it on the units and screw up through the brackets.
              • Seal the cut edges, then fit the upstand and end caps.
              Read the full fitting guide

              How to measure

              • Measure each wall run along the back, in millimetres.
              • Add about 50mm to every run so you can trim to a clean fit.
              • In an L-shape, let the longest run go into the corner.
              Full measuring guide

              Size guide

              • Worktops come 3000mm or 4100mm long and 600mm deep.
              • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
              • Buy a length that covers your run, then cut it to fit.
              Full sizes and heights guide

              Why you’ll love it

              • A plain black with a fine mottle

                Dark charcoal-black with a faint mottle of lighter flecks makes a calm, even surface. It is almost plain until light rakes across it from a window.

              • Finish code AF, solid board

                The maker gives no finish name for AF, so only the code is shown. The board is solid compact, so it tolerates damp and suits an undermount sink.

              • The twin of the Slate finish

                Decor 0190 also comes in the Slate finish (SL) as another compact worktop. Both are 12mm solid boards, so pick the finish that suits your light.

              A quiet black for sharp-lined rooms

              Black AF suits a kitchen where the top should disappear into a dark scheme: charcoal or black cabinets, or crisp white ones for contrast. The fine mottle is gentler than a pure flat black. For landlords and fitters, one slim 12mm decor serves many jobs across a block of flats. An undermount bowl looks tidy in a polished cut-out, every time.

              View black and dark worktops

              How to fit

              Fitting Black

              Black AF shows pale cutting dust and glue marks, so tape the face before any cutting. The 12mm board has a slim edge and is bonded with adhesive and the compact kit, never screwed through the top.

              What you’ll need

              Most homes have these already:

              • Pencil
              • Drill driver
              • Circular saw or jigsaw
              • Straight edge or spirit level

              Tap to add the brands fitters use to your order:

              Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

              Sizes and prices

              Prices include VAT and free delivery. Black is supplied in full 3m and 4.1m lengths, uncut.

              ProductSize (L x D x T)Price
              Worktop 4.1m · 12mm compact 4100 × 650 × 12mm £564.59
              Full sheet · 12mm compact 4100 × 1300 × 12mm £1,128.77
              Breakfast bar 950mm · 12mm compact 4100 × 950 × 12mm £1,185.59
              Matching upstand · 4.1m 4100 × 100 × 12mm £93.77
              Fitting kit · Compact joint kit £53.81

              Specification

              BrandKronospan Slimline Plus
              Decor code0190
              FinishAF
              EdgeCompact, solid monochrome core
              Thickness12mm
              Depth650mm; breakfast bars 950mm
              Lengths4100mm
              CoreSolid compact laminate, the same material all the way through
              Matching upstand4100 x 100 x 12mm
              WarrantyManufacturer’s warranty

              Questions about Black

              Can’t find your answer? Contact our worktop team.

              0330 000 0000Email us
              Which sizes does finish code AF cover?

              AF boards are 12mm thick and 4100mm long. The worktop is 650mm deep, the breakfast bar 950mm and the full sheet 1300mm.

              Does an undermount sink suit this top?

              Yes. The solid compact board allows a polished, exposed cut-out, so the bowl hangs below the top. Inset sinks are possible as well if you prefer them.

              How is it different from the Slate finish?

              It is the same decor 0190 in finish code AF, while the other is Slate (SL). We cannot describe AF beyond its code, so compare both listings.

              Will it show fingermarks?

              Dark surfaces do show dust and fingermarks. The fine mottle helps, but a quick wipe and dry buff keeps it looking sharp.

              Which handles go with black?

              Brass and brushed steel stand out against it, while matt black blends in. White cabinets give a clean, graphic contrast with the dark top.

              Is a matching upstand listed?

              Yes. The upstand is a 4100 x 100 x 12mm piece, offered with this decor. Splashbacks are not listed, so tile or paint above.

              More black & dark looks

              View all

              Kitchen Ideas, New Colours & The Odd Offer

              One email a month, written by people who know worktops. Unsubscribe whenever you like.

              By signing up you agree to receive marketing emails. Read our privacy policy.

              Your basket (0)

              Your basket is empty.

              Shop worktops

              Your delivery postcode

              We’ll use it to show your delivery dates across the site.