0330 000 0000 Email our team

Order by 4pm for next working day delivery*

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.
Show prices Inc. VAT
0
Show prices
Call 0330 000 0000
0
  • Black Slate Finish Compact Worktop, Black colour swatch
Kronospan Slimline PlusShowing: 12mm compact

Kronospan Slimline Plus · 0190 SL· Slate

Black Slate Finish Compact Worktop

A deep black with a fine, mottled speckle, finished in Kronospan's Slate. This 12mm compact worktop is solid right through, with a slim edge, and a 100mm upstand is listed. Pick it for black kitchens that need a thin, plain top.

Thickness and edge
Size

What's an upstand?

Upstand, 100mm highWorktop 100mm high 22mm thick Silicone bead 600mm deep worktop Wall

What it is

A 100mm-high strip in Black Slate Finish, the same decor as your worktop. It sits along the back edge of the worktop, against the wall.

Why you need one

Walls are rarely straight, so there's nearly always a gap between worktop and wall. An upstand covers it, stops water and crumbs getting down the back, and gives a neat finished line. It's the simplest, cheapest way to finish a worktop.

Sizes

    Most kitchens need one length per wall run.

    Fitting

    Cut it to length with a fine-tooth saw and bond it to the wall with grab adhesive. Run a bead of clear or matching silicone along the bottom edge, and finish any exposed ends with an end cap.

    Upstand or splashback?

    Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

    Read the full fitting guide

    What's a splashback?

    Splashbackupstand heightHob and oven 640mm high 10mm thick Worktop Wall

    What it is

    A full-height panel in Black Slate Finish, the same decor as your worktop, fixed to the wall behind the hob or sink.

    Why choose one

    One continuous wipe-clean surface with no grout lines, so there's nothing to stain or scrub between tiles. It protects the wall from splashes and cooking grease, and makes the worktop and wall look like one piece.

    Sizes

      Behind a hob

      Check the minimum clearance to a laminate panel in your hob's installation manual. Gas hobs usually need more space, or a heat-resistant panel behind the burners.

      Fitting

      Cut it to size and bond it to a flat, sound wall with panel adhesive. Seal the bottom edge to the worktop with silicone.

      Upstand or splashback?

      Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

      Read the full fitting guide

      What's an edging strip?

      BeforeCut end: barechipboard core AfterEdging strip,45mm wide, coversa cut end

      What it is

      A strip in Black Slate Finish that covers the cut end of the worktop. It comes pre-glued, or is fixed with contact adhesive.

      When you need it

      Whenever a cut end is on show: at the end of a run, on a breakfast bar, or anywhere you've cut a length down.

      Sizes

        Fitting

        1. Glue Spread contact adhesive on the end and the strip, or warm a pre-glued strip.
        2. Press Press it on firmly from the middle outwards, with a block of wood.
        3. Trim and file Trim the overhang with a sharp blade, then file the edges down at a slight angle.
        Read the full fitting guide

        What are joining strips?

        Corner strip (L-shape)Straight stripSeen from above Aluminium strip38mm worktop: use the38mm stripWorktopWorktop

        What it is

        An aluminium strip that joins two worktop lengths without a router or jig. The web slips between the two ends and the cap covers the joint.

        Straight or corner

        Straight: joins two lengths in a line. Corner: makes an L-shaped join where two runs meet.

        Sizes

          Match the strip to your worktop's thickness: a 38mm strip for a 38mm worktop.

          The alternative

          A mason's mitre gives a seamless corner, but it needs a worktop jig and a router. See both options in our fitting guide.

          Read the full fitting guide

          What are end caps?

          BeforeAfterExposed endEnd capScrewed over therounded profile Left end capRight end capYou, facing the worktopWall

          What it is

          An aluminium cap that finishes the exposed end of a postformed worktop, following its rounded front edge.

          Left or right?

          Stand facing the worktop. If the exposed end is on your left, you need a left end cap; if it's on your right, a right end cap.

          Sizes

            Match the cap to your worktop's thickness.

            Fitting

            Hold the cap against the end, drill small pilot holes and screw it on. A thin bead of silicone behind it keeps water out of the end.

            Read the full fitting guide

            What's in the joint kit?

            3 connector boltsJoint sealant Seen from underneathBolts pull the joint tight;sealant keeps water out

            What's in it

            Three connector bolts and a tube of joint sealant: everything to hold one worktop joint together.

            What it's for

            The bolts sit in pockets cut underneath both worktops and pull the joint tight. The sealant goes on the joint faces first, so water can't get into the core.

            How many?

            One kit per worktop joint.

              Read the full fitting guide
              Total inc VAT £448.35

              Free delivery on this order

              4 interest-free payments of £112.08
              or 3 interest-free payments of £149.45

              18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

              Order by 4pm for next working day delivery*

              • slate black, solid 12mm board, slim front
              • Finish code SL for slate black, decor 0190
              • slate black upstand, 100mm tall, matches
              • slate black in 650mm top, 950mm bar, 1300mm sheet
              • Free deliveryNext working day to most of the UK*
              • Full lengthsDelivered uncut, ready to fit
              • Pay your wayCard, Clearpay or Klarna
              Description

              A deep black with a fine, mottled speckle, finished in Kronospan's Slate. This 12mm compact worktop is solid right through, with a slim edge, and a 100mm upstand is listed. Pick it for black kitchens that need a thin, plain top.

              Delivery

              Delivered by our specialist worktop delivery partner, in full lengths, flat and protected. Delivery is free to every postcode we serve. Order by 4pm Monday to Friday for next working day delivery to most of England and Wales; orders placed after 4pm, at weekends or on bank holidays are dispatched the next working day, and some areas take 2 to 3 working days. Check your date below. We confirm your slot 24 hours before, and delivery is kerbside, so have a second person ready to carry it in.
              Returns

              Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

              Care and cleaning

              Slate finish black wipes clean with a soft cloth and warm soapy water. Buff it dry straight away, since dark surfaces show streaks. Keep pans on a trivet and use a board for chopping.

              Which edge?

              • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
              • Square edge: a sharp, modern line with a matching edge strip.
              • Compact: 12mm solid board, slim and waterproof.
              More on edges and thickness

              Fitting in four steps

              • Measure, then cut face down with a fine-tooth blade.
              • Lay it on the units and screw up through the brackets.
              • Seal the cut edges, then fit the upstand and end caps.
              Read the full fitting guide

              How to measure

              • Measure each wall run along the back, in millimetres.
              • Add about 50mm to every run so you can trim to a clean fit.
              • In an L-shape, let the longest run go into the corner.
              Full measuring guide

              Size guide

              • Worktops come 3000mm or 4100mm long and 600mm deep.
              • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
              • Buy a length that covers your run, then cut it to fit.
              Full sizes and heights guide

              Why you’ll love it

              • Black with a soft speckle

                The swatch is a deep charcoal-black with a faint mottle of slightly lighter flecks. It is plain at a glance and quietly textured up close.

              • Slate finish, solid board

                Slate is the maker finish name used for decor 0190 SL. The board is solid compact, so there is no core to swell and an undermount sink can be used.

              • Two finishes of decor 0190

                The same decor 0190 is also listed in finish code AF as a separate compact worktop. Both are 12mm; compare the two before you order.

              A plain black that does the quiet work

              Black Slate Finish suits kitchens built around a dark, simple top: white or sage cabinets, or all-black units with brass. Because the speckle is fine, it makes a calm, even surface in a utility room or rental. Fitters can specify the same slim profile for a whole block, and an undermount bowl sits cleanly in the polished cut-out, which keeps the sink area crisp.

              Browse black and dark worktops

              How to fit

              Fitting Black Slate Finish

              Black Slate Finish shows pale dust and fingermarks while you work, so keep it covered. The 12mm board has a slim edge and is bonded with adhesive and the compact kit, with no screws through the face.

              What you’ll need

              Most homes have these already:

              • Pencil
              • Drill driver
              • Circular saw or jigsaw
              • Straight edge or spirit level

              Tap to add the brands fitters use to your order:

              Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

              Sizes and prices

              Prices include VAT and free delivery. Black Slate Finish is supplied in full 3m and 4.1m lengths, uncut.

              ProductSize (L x D x T)Price
              Worktop 4.1m · 12mm compact 4100 × 650 × 12mm £448.35
              Full sheet · 12mm compact 4100 × 1300 × 12mm £896.66
              Breakfast bar 950mm · 12mm compact 4100 × 950 × 12mm £941.49
              Matching upstand · 4.1m 4100 × 100 × 12mm £76.05
              Fitting kit · Compact joint kit £53.81

              Specification

              BrandKronospan Slimline Plus
              Decor code0190
              FinishSlate (SL)
              EdgeCompact, solid monochrome core
              Thickness12mm
              Depth650mm; breakfast bars 950mm
              Lengths4100mm
              CoreSolid compact laminate, the same material all the way through
              Matching upstand4100 x 100 x 12mm
              WarrantyManufacturer’s warranty

              Questions about Black Slate Finish

              Can’t find your answer? Contact our worktop team.

              0330 000 0000Email us
              What sizes does the Slate finish come in?

              The Slate finish is 12mm thick and 4100mm long. Depths are 650mm for the standard top, 950mm for the breakfast bar and 1300mm for the full sheet.

              Can this black top take an undermount sink?

              Yes. The compact board is solid through, so the cut-out can be polished and left exposed. Inset sinks work too.

              What is the difference from the other 0190 black?

              Both are decor 0190, but this one is in finish code SL (Slate) and the other in AF. Check both listings and choose the finish you prefer.

              Does black show dust and fingermarks?

              Dark surfaces show pale dust, water spots and fingermarks more than patterned decors do. A quick wipe and dry buff keeps it tidy.

              Which cabinets pair well with it?

              White, sage, pale grey and deep green all work, with brass, steel or black handles. A pale splashback or tiles lift a small room.

              Can I add an upstand to the Slate finish?

              You can: the listed upstand is 4100 x 100 x 12mm. It follows the worktop in the same decor, and the wall above can be tiled or painted.

              More black & dark looks

              View all

              Kitchen Ideas, New Colours & The Odd Offer

              One email a month, written by people who know worktops. Unsubscribe whenever you like.

              By signing up you agree to receive marketing emails. Read our privacy policy.

              Your basket (0)

              Your basket is empty.

              Shop worktops

              Your delivery postcode

              We’ll use it to show your delivery dates across the site.