0330 000 0000 Email our team

Order by 4pm for next working day delivery*

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.
Show prices Inc. VAT
0
Show prices
Call 0330 000 0000
0
  • Bellato Grey Compact Worktop, Bellato Grey colour swatch
DuropalShowing: 12mm compact

Duropal · F76044 CM· CM

Bellato Grey Compact Worktop

A cloudy, mottled grey that sits between pale and mid tones, with the look of poured stone. This 12mm compact worktop is one solid board with a bevelled edge. Choose a matching upstand and splashback and a grey worktop scheme that stays calm.

Thickness and edge
Size

What's an upstand?

Upstand, 100mm highWorktop 100mm high 22mm thick Silicone bead 600mm deep worktop Wall

What it is

A 100mm-high strip in Bellato Grey, the same decor as your worktop. It sits along the back edge of the worktop, against the wall.

Why you need one

Walls are rarely straight, so there's nearly always a gap between worktop and wall. An upstand covers it, stops water and crumbs getting down the back, and gives a neat finished line. It's the simplest, cheapest way to finish a worktop.

Sizes

    Most kitchens need one length per wall run.

    Fitting

    Cut it to length with a fine-tooth saw and bond it to the wall with grab adhesive. Run a bead of clear or matching silicone along the bottom edge, and finish any exposed ends with an end cap.

    Upstand or splashback?

    Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

    Read the full fitting guide

    What's a splashback?

    Splashbackupstand heightHob and oven 640mm high 10mm thick Worktop Wall

    What it is

    A full-height panel in Bellato Grey, the same decor as your worktop, fixed to the wall behind the hob or sink.

    Why choose one

    One continuous wipe-clean surface with no grout lines, so there's nothing to stain or scrub between tiles. It protects the wall from splashes and cooking grease, and makes the worktop and wall look like one piece.

    Sizes

      Behind a hob

      Check the minimum clearance to a laminate panel in your hob's installation manual. Gas hobs usually need more space, or a heat-resistant panel behind the burners.

      Fitting

      Cut it to size and bond it to a flat, sound wall with panel adhesive. Seal the bottom edge to the worktop with silicone.

      Upstand or splashback?

      Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

      Read the full fitting guide

      What's an edging strip?

      BeforeCut end: barechipboard core AfterEdging strip,45mm wide, coversa cut end

      What it is

      A strip in Bellato Grey that covers the cut end of the worktop. It comes pre-glued, or is fixed with contact adhesive.

      When you need it

      Whenever a cut end is on show: at the end of a run, on a breakfast bar, or anywhere you've cut a length down.

      Sizes

        Fitting

        1. Glue Spread contact adhesive on the end and the strip, or warm a pre-glued strip.
        2. Press Press it on firmly from the middle outwards, with a block of wood.
        3. Trim and file Trim the overhang with a sharp blade, then file the edges down at a slight angle.
        Read the full fitting guide

        What are joining strips?

        Corner strip (L-shape)Straight stripSeen from above Aluminium strip38mm worktop: use the38mm stripWorktopWorktop

        What it is

        An aluminium strip that joins two worktop lengths without a router or jig. The web slips between the two ends and the cap covers the joint.

        Straight or corner

        Straight: joins two lengths in a line. Corner: makes an L-shaped join where two runs meet.

        Sizes

          Match the strip to your worktop's thickness: a 38mm strip for a 38mm worktop.

          The alternative

          A mason's mitre gives a seamless corner, but it needs a worktop jig and a router. See both options in our fitting guide.

          Read the full fitting guide

          What are end caps?

          BeforeAfterExposed endEnd capScrewed over therounded profile Left end capRight end capYou, facing the worktopWall

          What it is

          An aluminium cap that finishes the exposed end of a postformed worktop, following its rounded front edge.

          Left or right?

          Stand facing the worktop. If the exposed end is on your left, you need a left end cap; if it's on your right, a right end cap.

          Sizes

            Match the cap to your worktop's thickness.

            Fitting

            Hold the cap against the end, drill small pilot holes and screw it on. A thin bead of silicone behind it keeps water out of the end.

            Read the full fitting guide

            What's in the joint kit?

            3 connector boltsJoint sealant Seen from underneathBolts pull the joint tight;sealant keeps water out

            What's in it

            Three connector bolts and a tube of joint sealant: everything to hold one worktop joint together.

            What it's for

            The bolts sit in pockets cut underneath both worktops and pull the joint tight. The sealant goes on the joint faces first, so water can't get into the core.

            How many?

            One kit per worktop joint.

              Read the full fitting guide
              Total inc VAT £1,944.24

              Free delivery on this order

              4 interest-free payments of £486.06
              or 3 interest-free payments of £648.08

              18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

              Order by 4pm for next working day delivery*

              • light grey, solid 12mm board, slim front
              • Finish code CM for light grey, decor F76044
              • Matching light grey upstand and splashback
              • light grey in 640mm top, 950mm bar, 1300mm sheet
              • Free deliveryNext working day to most of the UK*
              • Full lengthsDelivered uncut, ready to fit
              • Pay your wayCard, Clearpay or Klarna
              Description

              A cloudy, mottled grey that sits between pale and mid tones, with the look of poured stone. This 12mm compact worktop is one solid board with a bevelled edge. Choose a matching upstand and splashback and a grey worktop scheme that stays calm.

              Delivery

              Delivered by our specialist worktop delivery partner, in full lengths, flat and protected. Delivery is free to every postcode we serve. Order by 4pm Monday to Friday for next working day delivery to most of England and Wales; orders placed after 4pm, at weekends or on bank holidays are dispatched the next working day, and some areas take 2 to 3 working days. Check your date below. We confirm your slot 24 hours before, and delivery is kerbside, so have a second person ready to carry it in.
              Returns

              Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

              Care and cleaning

              Bellato Grey hides light marks well, so a quick pass with a damp cloth and mild detergent is usually enough. Rinse and dry to avoid tide lines, and stand hot cookware on a trivet rather than on the surface.

              Which edge?

              • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
              • Square edge: a sharp, modern line with a matching edge strip.
              • Compact: 12mm solid board, slim and waterproof.
              More on edges and thickness

              Fitting in four steps

              • Measure, then cut face down with a fine-tooth blade.
              • Lay it on the units and screw up through the brackets.
              • Seal the cut edges, then fit the upstand and end caps.
              Read the full fitting guide

              How to measure

              • Measure each wall run along the back, in millimetres.
              • Add about 50mm to every run so you can trim to a clean fit.
              • In an L-shape, let the longest run go into the corner.
              Full measuring guide

              Size guide

              • Worktops come 3000mm or 4100mm long and 600mm deep.
              • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
              • Buy a length that covers your run, then cut it to fit.
              Full sizes and heights guide

              Why you’ll love it

              • Soft grey clouds, no strong pattern

                The face is a gentle mottle of light and mid grey with fine speckles and a few paler patches. With no veins to line up, joins between lengths are easy to hide.

              • Built solid, so sinks are flexible

                The board is dense compact from front to back. That lets you sink an undermount bowl with a polished cut-out, which the laminate versions of this decor cannot take.

              • Laminate or compact, same grey

                Bellato Grey also comes as laminate in 38mm postformed and 20mm square edge. Pick the compact top for its solid body and slim 12mm profile, and the laminate for a thicker front.

              A quiet grey that lets cabinets lead

              Because the pattern is low-key, Bellato Grey lets your cabinet colour do the talking. It suits white handleless doors, navy or charcoal units and light oak, and it gives a modern kitchen a clean working surface. For a landlord or a fitter doing several flats, one unfussy decor keeps repeat jobs simple, and the 12mm profile suits slim, contemporary runs.

              See all grey worktops

              How to fit

              Fitting Bellato Grey

              Bellato Grey is forgiving to fit because its mottling has no direction. The 12mm board takes a bevelled front edge, so work with adhesive and a router rather than screws, and dry-fit each length before you bond it.

              What you’ll need

              Most homes have these already:

              • Pencil
              • Drill driver
              • Circular saw or jigsaw
              • Straight edge or spirit level

              Tap to add the brands fitters use to your order:

              Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

              Sizes and prices

              Prices include VAT and free delivery. Bellato Grey is supplied in full 3m and 4.1m lengths, uncut.

              ProductSize (L x D x T)Price
              Worktop 4.1m · 12mm compact 4100 × 640 × 12mm £1,055.17
              Full sheet · 12mm compact 4100 × 1300 × 12mm £1,804.86
              Breakfast bar 950mm · 12mm compact 4100 × 950 × 12mm £1,944.24
              Matching upstand · 4.1m 4100 × 120 × 12mm £197.86
              Matching splashback · 4.1m 4100 × 640 × 9.2mm £421.57
              Fitting kit · Compact joint kit £53.81

              Specification

              BrandDuropal
              Decor codeF76044
              FinishCM
              EdgeBevelled edge
              Thickness12mm
              Depth640mm; breakfast bars 950mm
              Lengths4100mm
              CoreSolid compact laminate, the same material all the way through
              Matching upstand4100 x 120 x 12mm
              Matching splashback4100 x 640 x 9.2mm
              WarrantyManufacturer’s warranty

              Questions about Bellato Grey

              Can’t find your answer? Contact our worktop team.

              0330 000 0000Email us
              What are the dimensions of Bellato Grey?

              A 4100 x 640 x 12mm worktop, a 4100 x 950 x 12mm breakfast bar and a 4100 x 1300 x 12mm full sheet are the three formats listed.

              Can I fit an undermount sink in Bellato Grey?

              Yes. The solid compact board lets the cut-out be polished and exposed. The laminate Bellato Grey is chipboard-cored, so only the compact version suits undermount sinks.

              How is it different from the 38mm laminate?

              The laminate is a thicker postformed or 20mm square edge top over chipboard. The compact one is 12mm and solid, with a bevelled edge and room for an undermount bowl.

              Which handles and cabinets go with it?

              Matt white, sage and navy doors all pair well, and black or brushed steel handles suit its cool tone. Warm oak open shelving adds contrast.

              Is it a good match for a concrete look?

              Its cloudy mottling gives a concrete-like impression, but with softer variation than a hard industrial pattern. It works where you want that feel without a stark, raw finish.

              Can the upstand and splashback be ordered in the same decor?

              Yes. A 4100 x 120 x 12mm upstand and a 4100 x 640 x 9.2mm splashback are listed, both in Bellato Grey, to finish the wall behind the hob.

              More concrete looks

              View all

              Kitchen Ideas, New Colours & The Odd Offer

              One email a month, written by people who know worktops. Unsubscribe whenever you like.

              By signing up you agree to receive marketing emails. Read our privacy policy.

              Your basket (0)

              Your basket is empty.

              Shop worktops

              Your delivery postcode

              We’ll use it to show your delivery dates across the site.