0330 000 0000 Email our team

Order by 4pm for next working day delivery*

Full 4.1m lengths to your door

Free next day delivery*

Pay in 3 interest-free withKlarna.
Show prices Inc. VAT
0
Show prices
Call 0330 000 0000
0
  • Antique White Laminate Worktop, Antique White colour swatch
studioShowing: 38mm postformed, 3m contract

studio · 0500 PE· PE

Antique White Laminate Worktop

A plain, soft off-white with a slightly warm cast and no pattern to speak of, which makes it easy to pair. It is a 38mm postformed laminate worktop with a 6mm radius front edge, or 28mm, filed under white worktops and supplied in 3050mm lengths.

Thickness and edge
Size

What's an upstand?

Upstand, 100mm highWorktop 100mm high 22mm thick Silicone bead 600mm deep worktop Wall

What it is

A 100mm-high strip in Antique White, the same decor as your worktop. It sits along the back edge of the worktop, against the wall.

Why you need one

Walls are rarely straight, so there's nearly always a gap between worktop and wall. An upstand covers it, stops water and crumbs getting down the back, and gives a neat finished line. It's the simplest, cheapest way to finish a worktop.

Sizes

    Most kitchens need one length per wall run.

    Fitting

    Cut it to length with a fine-tooth saw and bond it to the wall with grab adhesive. Run a bead of clear or matching silicone along the bottom edge, and finish any exposed ends with an end cap.

    Upstand or splashback?

    Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

    Read the full fitting guide

    What's a splashback?

    Splashbackupstand heightHob and oven 640mm high 10mm thick Worktop Wall

    What it is

    A full-height panel in Antique White, the same decor as your worktop, fixed to the wall behind the hob or sink.

    Why choose one

    One continuous wipe-clean surface with no grout lines, so there's nothing to stain or scrub between tiles. It protects the wall from splashes and cooking grease, and makes the worktop and wall look like one piece.

    Sizes

      Behind a hob

      Check the minimum clearance to a laminate panel in your hob's installation manual. Gas hobs usually need more space, or a heat-resistant panel behind the burners.

      Fitting

      Cut it to size and bond it to a flat, sound wall with panel adhesive. Seal the bottom edge to the worktop with silicone.

      Upstand or splashback?

      Choose an upstand if you're tiling above the worktop, or want the cheapest neat finish. Choose a splashback behind the hob or sink, or if you want no tiles at all. Lots of kitchens use both.

      Read the full fitting guide

      What's an edging strip?

      BeforeCut end: barechipboard core AfterEdging strip,45mm wide, coversa cut end

      What it is

      A strip in Antique White that covers the cut end of the worktop. It comes pre-glued, or is fixed with contact adhesive.

      When you need it

      Whenever a cut end is on show: at the end of a run, on a breakfast bar, or anywhere you've cut a length down.

      Sizes

        Fitting

        1. Glue Spread contact adhesive on the end and the strip, or warm a pre-glued strip.
        2. Press Press it on firmly from the middle outwards, with a block of wood.
        3. Trim and file Trim the overhang with a sharp blade, then file the edges down at a slight angle.
        Read the full fitting guide

        What are joining strips?

        Corner strip (L-shape)Straight stripSeen from above Aluminium strip38mm worktop: use the38mm stripWorktopWorktop

        What it is

        An aluminium strip that joins two worktop lengths without a router or jig. The web slips between the two ends and the cap covers the joint.

        Straight or corner

        Straight: joins two lengths in a line. Corner: makes an L-shaped join where two runs meet.

        Sizes

          Match the strip to your worktop's thickness: a 38mm strip for a 38mm worktop.

          The alternative

          A mason's mitre gives a seamless corner, but it needs a worktop jig and a router. See both options in our fitting guide.

          Read the full fitting guide

          What are end caps?

          BeforeAfterExposed endEnd capScrewed over therounded profile Left end capRight end capYou, facing the worktopWall

          What it is

          An aluminium cap that finishes the exposed end of a postformed worktop, following its rounded front edge.

          Left or right?

          Stand facing the worktop. If the exposed end is on your left, you need a left end cap; if it's on your right, a right end cap.

          Sizes

            Match the cap to your worktop's thickness.

            Fitting

            Hold the cap against the end, drill small pilot holes and screw it on. A thin bead of silicone behind it keeps water out of the end.

            Read the full fitting guide

            What's in the joint kit?

            3 connector boltsJoint sealant Seen from underneathBolts pull the joint tight;sealant keeps water out

            What's in it

            Three connector bolts and a tube of joint sealant: everything to hold one worktop joint together.

            What it's for

            The bolts sit in pockets cut underneath both worktops and pull the joint tight. The sealant goes on the joint faces first, so water can't get into the core.

            How many?

            One kit per worktop joint.

              Read the full fitting guide
              Total inc VAT £94.31

              Free delivery on this order

              4 interest-free payments of £23.57
              or 3 interest-free payments of £31.43

              18+, UK residents, subject to status. Borrowing more than you can afford or paying late may affect your ability to get credit.

              Order by 4pm for next working day delivery*

              • Postformed, 6mm radius, 38mm or 28mm
              • Code PE finish, chipboard underneath
              • Matching 100mm upstand, 6mm splashback
              • 3050 x 600mm, with 900mm bar top
              • Free deliveryNext working day to most of the UK*
              • Full lengthsDelivered uncut, ready to fit
              • Pay your wayCard, Clearpay or Klarna
              Description

              A plain, soft off-white with a slightly warm cast and no pattern to speak of, which makes it easy to pair. It is a 38mm postformed laminate worktop with a 6mm radius front edge, or 28mm, filed under white worktops and supplied in 3050mm lengths.

              Delivery

              Delivered by our specialist worktop delivery partner, in full lengths, flat and protected. Delivery is free to every postcode we serve. Order by 4pm Monday to Friday for next working day delivery to most of England and Wales; orders placed after 4pm, at weekends or on bank holidays are dispatched the next working day, and some areas take 2 to 3 working days. Check your date below. We confirm your slot 24 hours before, and delivery is kerbside, so have a second person ready to carry it in.
              Returns

              Changed your mind? You have 14 days from delivery to return it unused, uncut and in its wrapping; we refund within 14 days of getting it back. Report any damage within 48 hours. Full returns policy.

              Care and cleaning

              Plain white shows coffee, turmeric and tea rings, so wipe splashes with warm soapy water soon after. Dry the surface. Avoid bleach-based or abrasive cleaners.

              Which edge?

              • Postformed: the laminate wraps a soft, rounded front. Classic and hard-wearing.
              • Square edge: a sharp, modern line with a matching edge strip.
              • Compact: 12mm solid board, slim and waterproof.
              More on edges and thickness

              Fitting in four steps

              • Measure, then cut face down with a fine-tooth blade.
              • Lay it on the units and screw up through the brackets.
              • Seal the cut edges, then fit the upstand and end caps.
              Read the full fitting guide

              How to measure

              • Measure each wall run along the back, in millimetres.
              • Add about 50mm to every run so you can trim to a clean fit.
              • In an L-shape, let the longest run go into the corner.
              Full measuring guide

              Size guide

              • Worktops come 3000mm or 4100mm long and 600mm deep.
              • Breakfast bars are deeper: 665mm or 900mm, for islands and overhangs.
              • Buy a length that covers your run, then cut it to fit.
              Full sizes and heights guide

              Why you’ll love it

              • A quiet, plain off-white

                There is no veining or grain, only an even, warm-leaning white. It gives a kitchen a clean, restful surface that lets cabinets, tiles and handles take the lead.

              • Rounded edge, no seam at the front

                The laminate wraps over a 6mm radius front edge, so there is no join where hands and cloths pass. Finish code PE resists stains and everyday scratches and needs no sealing.

              • Everything in the same white

                A 3000 x 100 x 20mm upstand and a 3000 x 600 x 6mm splashback match the top. For seating, the breakfast bar in 38mm measures 3050 x 900mm.

              A plain white that works hard in rentals

              Landlords and HMO owners often want a surface tenants will not argue with, and a plain off-white fits any cabinet colour. The postformed edge is simple to wipe, and 3m contract lengths keep stock and specification straightforward. In a utility room or pantry the pale top brightens a small space. Choose 28mm where a lighter weight edge suits you better, 38mm elsewhere.

              Browse white worktops

              How to fit

              Fitting Antique White

              Antique White is postformed with a 6mm radius edge, in 38mm and 28mm. Corners use a mason mitre cut with a jig, or an aluminium joining strip, and exposed ends take an end cap or edging.

              What you’ll need

              Most homes have these already:

              • Pencil
              • Drill driver
              • Circular saw or jigsaw
              • Straight edge or spirit level

              Tap to add the brands fitters use to your order:

              Rather not do it yourself? Any local kitchen fitter can fit it, and our team is happy to help on 0330 000 0000.

              Sizes and prices

              Prices include VAT and free delivery. Antique White is supplied in full 3m and 4.1m lengths, uncut.

              ProductSize (L x D x T)Price
              Worktop 3.05m · 38mm postformed, 3m contract 3050 × 600 × 38mm £94.31
              Breakfast bar 900mm · 38mm postformed, 3m contract 3050 × 900 × 38mm £163.40
              Worktop 3.05m · 28mm postformed, 3m contract 3050 × 600 × 28mm £94.25
              Matching upstand · 3m 3000 × 100 × 20mm £53.27
              Edging strip · 43mm ABS edging Per metre £5.77
              Joining strips · Straight 38mm Aluminium, 38mm × 640mm £9.99
              Joining strips · Corner 38mm Aluminium, 38mm × 640mm £11.99
              Joining strips · Straight 22mm Aluminium, 22mm × 640mm £9.99
              Joining strips · Corner 22mm Aluminium, 22mm × 640mm £11.99
              End caps · Left 38mm Aluminium, 38mm × 640mm £7.99
              End caps · Right 38mm Aluminium, 38mm × 640mm £7.99
              End caps · Left 22mm Aluminium, 22mm × 640mm £7.99
              End caps · Right 22mm Aluminium, 22mm × 640mm £7.99
              Fitting kit · Joint kit 3 connector bolts + sealant £12.99

              Specification

              Brandstudio
              Decor code0500
              FinishPE
              EdgePostformed, 6mm radius
              Thickness38mm or 28mm
              Depth600mm; breakfast bars 900mm
              Lengths3050mm
              CoreChipboard core under a high-pressure laminate surface
              Matching upstand3000 x 100 x 20mm
              Matching splashback3000 x 600 x 6mm
              WarrantyManufacturer’s warranty

              Questions about Antique White

              Can’t find your answer? Contact our worktop team.

              0330 000 0000Email us
              What are the measurements of the plain white top?

              The standard worktop is 600mm deep and 3050mm long, in 38mm or 28mm thickness. The 38mm breakfast bar is 900mm deep.

              What is the front edge like?

              It is a postformed edge with a 6mm radius. The laminate wraps around the front, so there is no seam to collect dirt.

              How do I join it at a corner?

              Use a mason mitre cut with a worktop jig, or an aluminium joining strip. The strip is quicker for a first-time fitter, while a mitre gives a neater seam.

              Does it suit a grey or a dark kitchen?

              Yes. Plain off-white gives crisp contrast against charcoal, navy or black units. Against cream cabinets it looks softer and more traditional.

              Will it show stains?

              The surface resists stains, but plain white shows spills of strong colour if left, so clean them promptly with warm soapy water.

              Should I pick 28mm or 38mm?

              The 28mm top is lighter in appearance and suits utility runs. The 38mm top looks more substantial and is the only one offered in the 900mm breakfast bar.

              More white looks

              View all

              Kitchen Ideas, New Colours & The Odd Offer

              One email a month, written by people who know worktops. Unsubscribe whenever you like.

              By signing up you agree to receive marketing emails. Read our privacy policy.

              Your basket (0)

              Your basket is empty.

              Shop worktops

              Your delivery postcode

              We’ll use it to show your delivery dates across the site.